All Products

SKU: SF-COM-11143

This is a simple 3.5mm TRS stereo audio jack with a screw-on plastic shroud. These are great for projects that plug into headphone jacks. Stereo plugs can also be used for carrying serial comm connections!  The outer shell unscrews to reveal solder terminals on the inside of the plug. Sol...

SKU: AF-911

Yes, this is an adorable miniature television! The visible display measures only 2.0" diagonal, the TFT comes with a NTSC/PAL driver board. The display is very easy to use - simply connect 6-12VDC to the red and black wires, then connect a composite video source to the yellow and black wire. Voil...

SKU: DF-FIT0480

INTRODUCTION This High Speed HDMI Cable provides a one-cable solution for your home entertainment needs. As a versatile HDMI cable, it provides high-definition quality for not only LattePanda, but also home entertainment networking or mini PCs such as Raspberry Pi, Cubi...

SKU: AF-910

Yes, this is an adorable miniature television! The visible display measures only 1.5" diagonal, the TFT comes with a NTSC/PAL driver board. The display is very easy to use - simply connect 6-12VDC to the red and black wires, then connect a composite video source to the yellow and black wire. Voil...

SKU: AF-1914

The Raspberry Pi Model B+ is an updated revision of the original Raspberry Pi Model B, featuring improved power supply design, more USB ports, expanded GPIO, and a more convenient microSD card slot — all in the same compact form factor. Powered by the same Broadcom SoC running at 700 MHz with 51...

SKU: AF-2888

A BNC (Bayonet Neill–Concelman) male plug with a screw terminal block for solderless connections. Use stranded or solid-core wire and a small screwdriver to create custom wiring jigs for test equipment, video signals, and more — no soldering required. Key Features Screw Terminal Block – Solder...

SKU: DF-FIT0476

A 10.1" IPS display with 1280 × 800 resolution and HDMI, VGA, and composite (AV) inputs, designed for use with the LattePanda, Raspberry Pi, and other mini PCs. The wide compatibility and high brightness make it suitable for digital photo frames, video playback, robotics interfaces, and more. Th...

SKU: AF-608

Connect two HDMI devices together with this basic HDMI cable. It has nice molded grips for easy installation, and is 1 meter long (about 3 feet). This is a HDMI 1.3 cable.We're now stocking a very fancy Official Raspberry Pi cable with overmolding and a Pi logo. Please note that these molded...

SKU: SF-CAB-00512

This is a standard issue USB 2.0 cable. This is the most common A to B Male/Male type peripheral cable, the kind that’s usually used for printers. Compatible with most SFE designed USB boards as well as USB Arduino boards like the Uno.If you’re still trying to wrap your head around the world of U...

SKU: AF-2420

A slim, high-quality HDMI cable measuring just 450mm (1.5 feet) long with a ultra-thin ~4mm diameter. Designed to connect two HDMI devices together while staying out of the way in tight spaces and tidy setups. Featuring molded grips for easy plugging and unplugging, this cable is perfect for Ras...

SKU: SF-DEV-26586 · MPN: DEV-26586

The W55RP20-EVB-Pico is an evaluation board for the W55RP20, a chip that combines the W5500 wired TCP/IP controller with the RP2040 microcontroller. It works much like a Raspberry Pi Pico, with the addition of W5500-based wired Ethernet.The board pinout is directly connected to the RP2040 GPIO an...

SKU: SF-CAB-13243

This is a USB 2.0 type B to Mini-B 5-pin black cable. You know, the mini-B connector that usually comes with USB Hubs, Cameras, MP3 players, etc. We specifically like these 6" long cables because using USB peripherals in projects within a small enclosure is much easier these days, and most times ...

SKU: SS-321020000

A 1.5 m HDMI male-to-male cable for connecting HDMI-enabled devices such as Raspberry Pi boards, laptops, media players, and game consoles to monitors or TVs. Supports HDMI v1.3 standard. Key Features HDMI Male to HDMI Male – Standard full-size connectors on both ends 1.5 m Length – Convenien...

SKU: SF-CAB-11301

A 6-foot (1.8 m) USB 2.0 cable with a Type-A plug on one end and a Mini-B 5-pin plug on the other. Use it to connect cameras, USB hubs, FTDI programmers, LiPo chargers, and other devices that use the Mini-B connector. Specifications Connector A – USB Type-A (male) Connector B – USB Mini-B 5-p...

SKU: PL-2172

This style of high-current connector is commonly used with the 7.2V sub-C battery packs that power many RC cars. The connector is keyed so that power cannot be reversed, and a latch secures the connection so that it will not become disconnected. This female Tamiya connector has 10cm 14-AWG leads...

SKU: LB-LS6069

This compact enclosed speaker delivers clear audio output at up to 6W with a 4Ω impedance, suitable for a wide range of DIY audio and display projects. It comes with a JST PH 2-pin input cable for easy connection to amplifier boards and audio-capable development boards. Key Features Enclosed D...

SKU: SF-CAB-15455

This panel mount USB-C extension cable enables you to more easily enclose a project that contains a USB-C port. The cable is 6" in length and includes two 14mm M3 screws compatible with the cable's 3mm panel mount holes, spaced 18mm apart.

SKU: AF-1669

Listen up! This set of two 2.8" x 1.2" speakers are the perfect addition to any audio project where you need 4 ohm impedance and 3W or less of power. We particularly like these speakers as they are small and enclosed for good audio volume and quality. The pair have a handy SPK input cable to a...