All Products

SKU: AF-527

Professional-quality wire strippers from Hakko, designed for clean, precise stripping of 20–30 AWG wire. Precision-ground notches strip insulation cleanly without nicking the conductor, and soft rounded grips provide comfortable extended use. Key Features Wire Range – 20 to 30 AWG Blades – Pr...

SKU: SF-CAB-14166

A pair of 24 AWG wires, each terminated with a female insulated spade connector at one end and a braided wire lead at the other. At 0.9 m (3 ft) long and rated for up to 300 VDC, these versatile cables are suitable for a range of prototyping and wiring applications. Specifications Wire Gauge: ...

SKU: SS-110990032

A pack of 50 individual jumper wires, each 100 mm long with female connectors on both ends (female-to-female). These single-pin wires are ideal for making point-to-point connections on breadboards, between header pins, and with development boards. Key Features Connector Type – Female-to-female...

SKU: AF-1128

This Copper Foil Tape features a thin, pure copper construction with an electrically conductive adhesive backing. Extremely flexible and easy to work with, it can be cut to shape with scissors and soldered directly for reliable electrical connections. The conductive adhesive on the back makes it...

SKU: TB-HM3194

A 12-way screw terminal strip rated at 6A and 250VAC. Can be divided into smaller sections with a sharp knife, making it easy to create custom-sized terminal blocks for any project. Each terminal block includes a mounting hole on a fixed pitch. Key Features 12-Way Configuration – Divisible int...

SKU: DF-FIT0902 · MPN: FIT0902

This 3-pin PH2.0 male-to-male cable pack provides compact, tidy connections for modular electronics builds. It is designed for use with Boson modules and the UNIHIKER development board, helping you connect sensors, peripherals and expansion modules without soldering.Each cable has keyed PH2.0 3-p...

SKU: DF-FIT0753 · MPN: FIT0753

This micro-diameter red hookup wire is made for compact electronics assembly, PCB rework and other wiring jobs where ordinary hookup wire is too bulky. Its 0.4mm outer diameter makes it easy to route through tight spaces in miniature electronics, wearable hardware and delicate circuit board modif...

SKU: DF-FIT0513

A pack of 10 Gravity-series 4-pin sensor cables, 30 cm long, for connecting I2C or UART sensors to Gravity-compatible boards. Each cable has a PH2.0 4-pin connector on one end and a XH2.54 DuPont connector on the other, compatible with standard 2.54 mm breadboard pin pitch for easy prototyping. ...

SKU: DF-FIT0031

A pack of 10 analog sensor cables designed for use with DFRobot IO Expansion Shields and compatible analog sensors. Each cable connects a sensor to the expansion shield's analog ports, making wiring quick and tidy. Each cable features a servo-type connector (Signal, GND, PWR) on one end and a 3-...

SKU: AF-3143

A pack of small dual-row connector housings for building custom jumper cable harnesses. Compatible with standard 0.1" pitch raw jumper wire crimp pins — snap in your crimped wires and create exactly the connector configuration your project needs. Package Contents 5× 2×2 housing 5× 2×3 housing 5...

SKU: SF-PRT-08026

A 25 ft (7.6 m) spool of white 22 AWG solid-core hook-up wire. Solid core holds its shape when bent, making it ideal for breadboard prototyping and point-to-point wiring. Specifications Wire Type – Solid core Gauge – 22 AWG Length – 25 ft (7.6 m) Colour – White Package Contents 1× Spool ...

SKU: DF-DFR0224

The Arduino Screwless Terminal Shield breaks out all Arduino Uno-compatible header pins to spring-loaded push-in terminal blocks. Press the lever, insert your wire, and release — no screwdriver needed. The shield stacks with standard Arduino shields, so you can add additional boards on top. Key ...

SKU: PL-2708

The 0.100″ (2.54 mm) 1×8-Pin Right-Angle Female Header provides a reliable perpendicular connection point for standard 0.1″ pitch male headers. Its right-angle orientation is ideal for low-profile builds or board-edge connections where vertical clearance is limited. This single-row, 8-pin socket...

SKU: AF-1881

A 2-metre length of black 26AWG stranded-core wire with a flexible silicone sheath. Silicone-covered wire is significantly more supple and heat-resistant than standard PVC wire — rated to handle up to 200 °C and 600 V — making it ideal for projects that involve tight bends, heat exposure, or repe...

SKU: AF-3786

These 2-Pin Wire Joints provide a quick, solder-free way to connect two wires together. Simply press the curved arm to open the aperture, insert the wire, and release — the spring mechanism holds the wire securely in place. Compatible with a wide range of wire gauges (16–30 AWG) in both solid an...

SKU: LB-00183

A 10-wire splittable ribbon jumper cable with male (pin) connectors on both ends. Each wire is colour-coded and can be peeled apart individually or in groups to suit your wiring needs. At 300mm (30cm) long, they're a good length for breadboard and prototyping work. Key Features Male-to-Male (M...

SKU: AF-3893

The JST PH 3-Pin to Male Header Cable converts a JST PH 3-pin connector into three individual colour-coded wires, each terminated with a 0.1" (2.54 mm) male header pin. It's ideal for extending sensor or LED connections to a breadboard or development board. At 200 mm long, this cable provides en...

SKU: SF-WIG-21277 · MPN: WIG-21277

Need more Qwiic ports without forcing every board into a single daisy chain? This star-shaped Qwiic MultiStar acts as a hub for the I2C bus, adding four extra usable Qwiic ports to a board that only has one.The board has five Qwiic connectors in total. One connects back to your main board, leavin...

SKU: AF-801

The Adafruit Prototyping Pi Plate Kit snaps onto your Raspberry Pi and provides a generous prototyping area with all GPIO, I2C, SPI, and power pins broken out to labelled 0.1" strips and 3.5 mm screw-terminal blocks. It's designed for the original Pi Model A/B but also works with any 40-pin Pi (A...

SKU: LB-LS5179-5

A pack of ten 5-pin PCB screw terminal blocks with a 2.54mm (0.1") pitch — the same spacing as standard breadboard headers. Strip a wire, insert it into the terminal, and tighten the screw for a secure, solderless electrical connection that can be disconnected and reconnected as needed. The 2.54...