All Products

SKU: SF-PRT-10217

If you need to charge LiPo batteries, this simple charger will do just that, and do it fast! The SparkFun LiPo Charger Basic is stripped down of all features and just does one thing well - charge 3.7V LiPo cells at a rate of 500mA. It is designed to charge single-cell Li-Ion or Li-Polymer ba...

SKU: AF-6000 · MPN: ADA6000

The Adafruit Feather RP2350 brings the powerful RP2350 microcontroller to the classic Feather form factor, giving you full compatibility with the entire FeatherWing ecosystem. With dual Cortex-M33 cores running at 150 MHz, 520 KB of SRAM, and 8 MB of flash, this board delivers roughly twice the p...

SKU: AF-1905

The Adafruit Mini Lipo with Mini-B USB Jack is a compact charger for single-cell 3.7V/4.2V lithium polymer and lithium ion rechargeable batteries. Plug in any Mini USB cable to a USB power source and connect your battery via the JST connector — two LEDs show status at a glance (red = charging, gr...

SKU: AF-1304

The Adafruit Micro Lipo is a tiny USB charger for single-cell 3.7V/4.2V lithium polymer and lithium ion rechargeable batteries. Its gold-plated PCB-style USB connector plugs directly into any USB port — connect your battery via the JST plug and charging begins automatically. Two LEDs indicate sta...

SKU: AF-1904

The Adafruit Micro Lipo with MicroUSB Jack is a compact charger for single-cell 3.7V/4.2V lithium polymer and lithium ion rechargeable batteries. Plug in any Micro USB cable to a USB power source and connect your battery via the JST connector — two LEDs show status at a glance (red = charging, gr...

SKU: SF-PRT-15217

The SparkFun LiPo Charger Plus is the souped-up power option in the SparkFun line of single-cell lithium polymer (LiPo) battery chargers. With this iteration, we've changed the input charge connector to USB-C and provided charge rate selection as well as optional thermal protection. Charge, power...

SKU: SF-PRT-10401

A simple single-cell LiPo/Li-Ion battery charger based on the MCP73831T charge controller IC. Connect a battery via the JST connector, plug in a Mini-USB cable for power, and the board handles charging automatically with a status LED to indicate progress. Key Features MCP73831T Charge Controll...

SKU: AF-5397

The Adafruit LiIon/LiPoly Charger BFF is a compact battery charging add-on designed to mount directly onto the back of any QT Py board. It makes portable power simple — plug in a standard 3.7 V/4.2 V lithium battery, and the charger handles the rest via the QT Py's USB-C connection. When USB is ...

SKU: DF-DFR0528

DFRobot UPS HAT is an uninterruptable power supply shield designed for the Raspberry Pi Zero series, and also compatible with Pi 2/3/A+. The UPS HAT can continue to provide power to the Raspberry Pi for a certain period of time when the system is powered off, by which to avoid system damage and a...

SKU: AF-727

A slim 3×AAA battery holder with a built-in on/off switch and JST 2-pin connector. The series configuration outputs approximately 3.6–4.5V — a similar range to lithium-ion batteries — making it an ideal non-rechargeable alternative for 3.3V projects that use a JST battery connector. Uses a genui...

SKU: AF-3287

A compact 3×AA battery holder with a built-in on/off switch, JST 2-pin connector, and an ergonomic belt clip. The series configuration outputs approximately 3.6–4.5V — a similar range to lithium-ion batteries — making it an ideal non-rechargeable alternative for 3.3V projects that use a JST batte...

SKU: SF-DEV-14779

The LumiDrive LED Driver is SparkFun’s foray into all things Python on micro-controllers. With the SparkFun LumiDrive you will be able to control and personalize a whole strand of APA102s directly from the board itself. We’ve broken out a number of analog and digital pins from the on board SAMD21...

SKU: DF-TEL0111

INTRODUCTION   The ESP32 WiFi and Bluetooth chip is the latest generation of Espressif products. It has a dual-core 32-bit MCU, which integrates WiFi HT40 and Bluetooth/BLE 4.2 technology inside. Compared to the arduino ESP8266 (the previous generation), the ESP32 has a significant ...

SKU: LB-LR0309-20

A simple single-slot 9V battery holder case with wire leads for soldering or connecting directly to your projects. Keeps your battery secure and organised. Key Features Wire Leads – Pre-attached cables for direct soldering or breadboard connection Snap-Fit Design – Holds one standard 9V batte...

SKU: DF-DFR0123

This 20W adjustable DC-DC boost converter with a digital display is based on the professional boost chip and supports 3~32V power input, 5~35V output, and an accuracy of ±0.05V. The switching frequency is 400KHz, the conversion efficiency can reach 94%, it has the functions of overheating prote...

SKU: AF-5905 · MPN: ADA5905

The Adafruit Proto Under Plate PiCowbell is a single-slot prototyping base for the Raspberry Pi Pico or Pico W. It provides a reset button, a STEMMA QT / Qwiic connector, a prototyping grid, and double-row socket headers — all with no soldering required when used with a Pico H or Pico WH. The do...

SKU: DF-DFR1015

Multiple-output DC–DC converters are essential in a multitude of applications where different DC output voltages are required.This DC-DC step-down voltage power module converts 7.5V~30V input to an output of 3.3V/5V/9V/12V (default to 5V), which can be selected by short-circuiting the correspondi...

SKU: LB-PT91009

Protect your valuables with our Lipo Battery Safe Bag! Made from high-quality, fire-retardant fiberglass nylon, this bag offers sturdy, durable protection against potential heat damage. While it’s not indestructible, it’s built to resist heat up to 550 ℃ (1000 ℉), making it a reliable choice for ...

SKU: WS-20380

The PicoGo is a smart mobile robot platform designed for the Raspberry Pi Pico. It integrates line-following, obstacle avoidance, ultrasonic ranging, object tracking, Bluetooth and IR remote control, an LCD display, and RGB LEDs — all on a single board with no messy external wiring. Powered by t...

SKU: SF-PRT-10592

This is the SMD version of PRT-07948, which is the unit we like to use as RTC backup and SRAM backup for GPS units. Holds battery in place with friction. The metal housing connects to the positive side of the battery and the PCB pad underneath is connected to the negative side.