All Products

SKU: PI-CAM007

This camera cable adapter converts the smaller Raspberry Pi Zero camera ribbon cable to the standard full-size CSI connector used on Raspberry Pi models A, B, 2, 3, and 4. Connect the narrow end to your Pi Zero camera module and the wider end to the CSI port on a full-size Pi. Specifications C...

SKU: AF-4302

The official Raspberry Pi Micro HDMI to Standard HDMI cable features quality overmoulding with the Pi logo and moulded grips for easy installation. At 1 metre long, it's the perfect length for desktop setups with the Raspberry Pi 4, Pi 5, and other boards with Micro HDMI output. Use two cables (...

SKU: AF-1730

This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) or Raspberry Pi Display for a different size. Works great, just carefully open the connector on the Pi and slip this one in.This cable is 18" / 457mm long We have cable...

SKU: AF-3446

The first 'official' Pi Zero case from the Raspberry Pi Foundation is here in Raspberry Pi's sleek pink and white! While we've had our own classic Pi Zero case for a little while now, the Pi Foundation celebrates the release of the Pi Zero W with this impressive, well-designed effort that is d...

SKU: RP-SC0229-1

The official Raspberry Pi Foundation case for the Raspberry Pi 4 Model B. This solid ABS enclosure in the classic red and white colour scheme keeps your Pi secure while providing labelled cut-outs for all connectors: micro HDMI, USB-C power, Ethernet, USB ports, and the GPIO header. The snap-fit...

SKU: LB-LS3938

This terminal block breakout module comes fully assembled and soldered, ready for use with Raspberry Pi boards.It is compatible with Raspberry Pi 1 Model B+, Pi 2 Model B, Pi 3 Model B, Pi 3 Model B+, Pi 4 Model B, Pi Zero, and Pi Zero W.The module features 2.54 mm (0.1″) pitch terminal blocks su...

SKU: AF-1445

A clean, rounded 16mm panel-mount momentary pushbutton in red. This normally-open micro-switch connects the contacts only while pressed, making it a straightforward input for any project enclosure or control panel. Key Features Momentary Action – Normally open; contacts connect only while pres...

SKU: AF-4117

A flexible LED strip encased in translucent silicone rubber that produces a smooth, neon-like glow in purple. Unlike traditional neon, it requires no special transformers or glass tubing — just connect 9–12 V DC and it lights up. The silicone diffuser creates an even, continuous glow rather than ...

SKU: LB-LR0387

This is the assembled version of the Pi T-Cobbler Plus.  It only works with the Raspberry Pi Model Zero, A+, B+, Pi 2, Pi 3 & Pi 4! (Any Pi with 2x20 connector)Each order comes with a 40 pin ribbon cable and assembled T-Cobbler Plus. You can plug the 40-pin GPIO cable between th...

SKU: DF-FIT0834

This ultra-thin flexible LED strip from DFRobot packs 138 warm white SMD 0805 LEDs into a single metre, with an incredibly slim profile of just 2.5mm wide and 1mm thick. It's ideal for lighting tight spaces where standard LED strips won't fit. Operating at 3V, the strip is compatible with microc...

SKU: SF-PRT-14272

The Raspberry Pi Zero and Zero W use a smaller CSI port than the full-sized Raspberry Pi boards, which means standard camera cables won't fit. This 15cm adapter cable bridges the gap — one end connects to the Raspberry Pi Camera Module, the other to the Zero's smaller CSI connector — giving your ...

SKU: SF-COM-09420

Resonators function like crystals, but are a lower cost solution that does not require external caps.These resonators are +/-0.5% or better from -20C-+80C. These resonators have built-in load capacitors so no external caps are needed.

SKU: PI-RPI-020

The Official Raspberry Pi Zero Case is designed to fit both the Pi Zero and Pi Zero W. It ships with three interchangeable lids so you can configure it for different use cases: a plain lid for a clean finish, a GPIO lid for header access from above, and a camera lid with a short ribbon cable for ...

SKU: AF-285

This weatherproof RGB LED flexi-strip features 30 LEDs per metre on a white PCB backing with a silicone weatherproof coating and 3M adhesive on the reverse. The entire strip is controlled as one unit — drive the R, G, and B channels with a microcontroller and three N-channel MOSFETs (or NPN trans...

SKU: RP-SC1128

An adapter cable for connecting Raspberry Pi Camera modules to the Raspberry Pi 5. The Pi 5 uses a smaller 22-way, 0.5mm-pitch "mini" FPC connector for its two four-lane MIPI ports, while current Raspberry Pi cameras use the older 15-way, 1mm-pitch "standard" connector — this cable bridges the tw...

SKU: PI-CAB0305

This 200 cm flex cable is a replacement or extension cable for the Raspberry Pi Camera Module. The extra length gives you much more flexibility in positioning your camera away from the Pi — ideal for enclosures, 3D printer monitoring, security setups, or any project where the standard 15 cm cable...

SKU: PI-RPI-010

This kit comes with super handy adaptors for the mini-HDMI and micro-B USB On-The-Go ports for your new Raspberry Pi Zero! You'll need these adaptors to connect your Raspberry Pi Zero to normal HDMI screens and USB devices (like a keyboard or WiFi dongle). Need a case? Check out our Pibow Zero...

SKU: LB-LR0214-142A

One input: DC 6V - 12V (input voltage to the output voltage must be higher than 1V.) Output: 3.3V (+ - 0.05v error), 5.0V (+ - 0.05v error), 800mA (load current can not exceed 800ma), 12V (12V input directly converter to the output) PCB board size: 4.5cm * 4.5cm With red power indicator le...

SKU: EF-EF04076

OCTOPUS OLED Display is an OCTOPUS series electric brick with 128X64 OLED display.OLED display has characters of thin thickness, high brightness, self-emission, wide resolution and visual angle, wide temperature range and low power consumption,etc..It can be used for small patterns, alphabets,...

SKU: EC-MCS02930M

This Adruino compatible motor Driver shield is a full-featured products that it can be used to drive 4 DC motor or two 4-wire stepper and two 5v servo. It drive the DC motor and stepper with the L293D,and it drive the servo with arduino pin9 and pin10. Features Be able to drive 4 DC motor and...