All Products

SKU: AF-3642

A 2.1 mm DC barrel jack with a built-in slide switch, giving you simple on/off control for devices that lack a dedicated power switch. It shares the same PCB footprint as a standard non-switched barrel jack, so it drops straight into existing designs without layout changes. Plug in your power su...

SKU: AF-3643

A 2.1 mm DC barrel jack with a built-in rocker switch, giving you a simple on/off control for devices that lack a dedicated power switch. It shares the same PCB footprint as a standard non-switched barrel jack, so it drops straight into existing designs without layout changes. Plug in your power...

SKU: DF-DFR0991

This is an I2C button module with RGB LED. The module not only supports reading button status like conventional ones, but also controlling RGB LED color and switching on/off the light independently, which could create more visual and interactive experiences for your projects. For example, when th...

SKU: AF-4352

Build a handheld light-up button controller with this complete kit that pairs the Adafruit 4×4 NeoTrellis RGB Driver with a Feather M4 Express inside an elegant laser-cut acrylic enclosure. The 16 silicone buttons each have individually addressable NeoPixels underneath, and the seesaw I2C chip ha...

SKU: AF-3218

Fire up your engines because these are the hot-rods of toggle switches! Equipped with an aerodynamic red protective casing, and a red LED at the tip of the switch, this Red LED Toggle Switch is sure to add some flair (and flare!) to your project.Often seen on control panels, n...

SKU: LB-LS6460

A battery box with a built-in 130 DC motor and on/off switch — a simple, self-contained power and drive unit for beginner robotics, model vehicles, and STEM projects. Just add batteries and connect to your build. Specifications Motor – 130 DC motor Voltage – 3–6 V (depending on battery config...

SKU: EF-EF05070

The ELECFREAKS Nezha Pro is a micro:bit expansion board designed for education and creative programming. It features a 4-way motor driver, 8 sensor expansion ports, and two built-in motor control buttons that work even without a micro:bit connected. All interfaces use RJ11 connectors with an anti...

SKU: AF-5967 · MPN: ADA5967

The Adafruit Proto Tripler PiCowbell gives your Raspberry Pi Pico or Pico W three side-by-side socket slots — plug in your Pico and up to two PiCowbell accessories with no soldering or stacking headers required. It also includes LiPo battery charging, a power switch, reset button, STEMMA QT conne...

SKU: LB-1147

An enclosed battery holder for three AAA cells with a built-in on/off switch. The snap-on lid keeps batteries secure during use, and the integrated switch lets you toggle power without disconnecting leads. Provides approximately 4.5 V with three alkaline AAA batteries (3 × 1.5 V) or 3.6 V with t...

SKU: AF-1097

A simple 4-channel 315 MHz RF receiver module with toggle-type output. No programming, configuration, or microcontroller needed — just power it with ~5V DC and pair it with a matching RF keyfob remote. Each of the four buttons toggles its corresponding output pin on and off. The toggle (T4) type...

SKU: AF-1440

A 16mm illuminated pushbutton with a built-in green LED and momentary action. The switch contacts connect only while the button is held down and return to their normally-open state when released — perfect for trigger inputs, action buttons, and interactive controls. The LED is wired independentl...

SKU: AF-1477

A 16mm illuminated pushbutton with a built-in blue LED and momentary action. The switch contacts connect only while the button is held down and return to their normally-open state when released — perfect for trigger inputs, action buttons, and interactive controls. The LED is wired independently...

SKU: AF-1439

A 16mm illuminated pushbutton with a built-in red LED and momentary action. The switch contacts connect only while the button is held down and return to their normally-open state when released — perfect for trigger inputs, action buttons, and interactive controls. The LED is wired independently ...

SKU: AF-1479

A 16mm illuminated pushbutton with a built-in white LED and momentary action. The switch contacts connect only while the button is held down and return to their normally-open state when released — perfect for trigger inputs, action buttons, and interactive controls. The LED is wired independentl...

SKU: AF-1375

This breakout board is the simplest way to create a project with a single "toggle" capacitive touch sensor. No microcontroller is required here - just power with 1.8 to 5.5VDC and touch the pad to activate the sensor.This sensor is a toggle output type: touch-on then touch-off. That means that...

SKU: SF-CAB-25579

A 1-metre USB-C extension cable with an inline power switch that maintains full USB 2.0 data connectivity. Unlike typical USB power switch cables that only toggle VBUS, this cable also connects the D+/D- data lines, both Configuration Channel pins (CC1 and CC2), and the shield — giving you comple...

SKU: PL-1152

An enclosed battery holder for three AA cells with a built-in on/off switch. The snap-on lid slides over the batteries to fully enclose them, keeping the cells secure during use. Provides approximately 4.5 V with three alkaline AA batteries (3 × 1.5 V) or 3.6 V with three NiMH rechargeable cells...

SKU: SF-COM-28236 · MPN: COM-28236

This add-on board solves a common Raspberry Pi Pico HAT problem: fixed orientation. It takes the standard pinout for a Raspberry Pi Pico development board and flips it as if the Pico had been physically rotated over, facing down.That makes it useful when your Pico needs to stay in a particular or...

SKU: AF-5255

The Adafruit LED Glasses Starter Kit includes everything you need to build a complete pair of programmable LED glasses. Pair the 116-LED front panel with the Bluetooth-enabled nRF52840 driver board, snap them onto the included fashion frames, and you're ready to create dazzling wearable light dis...

SKU: AF-3104

This Mini Illuminated Momentary Power Button it an adorable breadboard-friendly tactile switch that has a built-in LED. It provides a simple way to add a tactile switch and a colorful universal power symbol to your project.  The tact switch is about the same size as 6mm tactile switc...