All Products

SKU: AF-2315

The Adafruit PiTFT 2.2" HAT Mini Kit is a compact colour display that plugs directly onto your Raspberry Pi's GPIO header. Featuring a 2.2-inch 320×240 pixel TFT with 16-bit colour, it's perfect for use as a mini console, desktop display, image viewer, or video player — all driven over the Pi's h...

SKU: AF-2324

The Adafruit Ultimate GPS HAT adds high-quality GPS and GLONASS positioning to your Raspberry Pi. Built around a PA1616D module, it provides precise location data and a built-in real-time clock (RTC) with coin cell backup — perfect for outdoor projects, time synchronisation, and location-aware ap...

SKU: WS-24797

A 2.13″ four-colour e-paper raw display from Waveshare, capable of rendering red, yellow, black, and white — making it ideal for eye-catching price tags, shelf labels, and status indicators. Like all e-ink panels, it retains the displayed image indefinitely with no power applied and consumes ener...

SKU: DF-DFR0827

PiTray mini is a Model B liked carrier board for building cluster with Raspberry Pi Computed Module 4 (CM4). PiTray mini focuses on providing a neat and budget solution for CM4 applications. With the same outline and mounting holes with Raspberry Pi Model B, it can be stacked upon ...

SKU: SF-DEV-21326 · MPN: DEV-21326

This compact MicroMod processor board adds an STM32F405 to a compatible MicroMod Carrier Board, giving your project an ARM® Cortex®-M4 32-bit RISC core in a small, swappable M.2 module.The bevelled edge connector keys into the MicroMod M.2 socket and is secured with the screw supplied with MicroM...

SKU: PR-PIM485

Pump out some mini beats with Pirate Audio Speaker! This diminutive sound system has an I2S DAC, amp, mini mono speaker, high-res display, and playback control buttons. Pirate Audio Speaker is perfect for making a Lilliputian radio, sound effect player, or even as a teeny-weeny games console! ...

SKU: AF-2345

The Adafruit RGB Matrix HAT + RTC makes it easy to drive HUB75-type RGB LED matrices from your Raspberry Pi. This HAT plugs onto any Pi with a 40-pin GPIO header and includes a DS1307 real-time clock, so your Pi can keep accurate time even after reboots or power loss — perfect for clock and time-...

SKU: WS-25725

A 13.3-inch e-Paper raw display panel with 960×680 resolution in black and white. This is the bare display panel without a driver board — ideal for custom integrations where you have your own driver hardware or want to design a bespoke mounting solution. The e-ink technology requires no backligh...

SKU: AF-2348

The Adafruit DC & Stepper Motor HAT drives up to 4 DC motors or 2 stepper motors from your Raspberry Pi, with full PWM speed control. It uses a dedicated PWM driver chip over I2C, so only two pins (SDA/SCL) are needed — leaving the rest free for other I2C devices or HATs. The TB6612 MOSFET motor...

SKU: AF-4687

The Adafruit 2.13" Monochrome E-Ink Bonnet brings crisp, paper-like displays to your Raspberry Pi with no soldering required. Simply plug this pre-assembled bonnet onto any Pi with a 2×20 header and start displaying high-contrast black-and-white graphics that remain visible even with power discon...

SKU: PR-PIM213

The Pimoroni Automation HAT is a versatile home automation and monitoring controller for the Raspberry Pi. It provides relays, analogue inputs, buffered digital inputs, and powered outputs — all 24 V tolerant — with indicator LEDs on every channel for at-a-glance status monitoring. Connects to t...

SKU: SF-COM-16347

The WS2812B (or "NeoPixel") may look like a common 5050-sized (5x5mm) SMD LED, but there’s actually an integrated control circuit embedded inside there too. Sometimes you don't need 10 or even 50, maybe you need a whole reel of 1000! If you are the person who needs that many than this is the perf...

SKU: WS-19343

A dual GPIO expander board for the Raspberry Pi Pico that duplicates all GPIO pins into two sets of 2×20 male headers. Plug your Pico into the centre female socket, then connect two expansion modules simultaneously — doubling your prototyping capability without rewiring. Features clear pinout la...

SKU: AF-2808

Complete your Pi setup with our custom designed faceplate specifically designed to fit your 2.4" PiTFT HAT and Adafruit Pi A+  case base! This Faceplate and Buttons Pack is a simple way to enclose your 2.4" PiTFT and Pi safely and in style. The faceplate replaces the normal 'top...

SKU: AF-4947

The Adafruit 2.13" Tri-Colour eInk Display brings electronic paper technology to your microcontroller projects. Featuring a 250×122 pixel display with black, red, and white ink, this breakout delivers high-contrast, daylight-readable visuals that persist even when power is completely disconnected...