All Products
Showing 21-40 of 52 products · 8 unavailable products hidden
2.4GHz Dipole Swivel Antenna with RP-SMA - 5dBi
·
A 200 mm (8″) swivel dipole antenna with 5 dBi gain and an RP-SMA connector — the industry-standard fitting found on most WiFi routers and wireless modules. The higher gain compared to the 2 dBi version extends range at the cost of a larger form factor. The swivel joint lets you angle the antenna...
Quad-band Wired Cellular Antenna SMA
A Quad-band antenna for embedded cellular devices. This antenna will allow you to connect your cellular module to the outside world. Operates on four frequencies. Comes with a 3M adhesive backing for mounting. Standard male SMA terminated. Key Specifications: Quad-band: 850/900/1800/1900MHz a...
915MHz LoRa Antenna RP-SMA - 1/2 Wave 2dBi
A 1/2-wave 915MHz LoRa duck antenna with 2dBi gain and an RP-SMA connector. Designed for the 860–960MHz band, this 200mm antenna is ideal for extending the range of LoRa nodes and other sub-GHz radio modules. Specifications Frequency Range – 860–960MHz Gain – 2dBi Type – 1/2-wave dipole Con...
GPS-RTK Dead Reckoning Kit (ZED-F9R, SMA)
·
Get started with high-precision RTK GNSS and dead reckoning using u-blox's ZED-F9R module. This kit combines a sensor-fusion GPS breakout, a multiband SMA antenna and a USB cable so you have the core hardware needed for a rover setup.The ZED-F9R fuses GNSS measurements with a 3D IMU sensor, wheel...
u-blox Multi-band Active GNSS Antenna - L1, L5 (ANN-MB5)
·
The u-blox ANN-MB5 multi-band (L1/L5/E5a/B2a/NavIC) active GNSS antenna is designed for the new generation of multi-frequency, multi-constellation standard precision GNSS technology, which can achieve the most accurate, reliable, and robust positioning even in challenging environments. ANN-MB5’s ...
SMA Male to RPSMA Male Adapter
The SMA Male to RP-SMA Male Adapter converts between SMA and RP-SMA connector types, making it easy to pair antennas and cables that use different threading configurations. One end features a standard SMA male connector (centre pin, outer nut) and the other features an RP-SMA male connector (cent...
2.4GHz Duck Antenna RP-SMA - Large
A large 2.4 GHz rubber duck antenna with 5 dBi gain and a reverse-polarity SMA (RP-SMA) connector. At 196 mm (7.7″) long, it provides significantly more range than smaller duck antennas — ideal when you need to push your wireless link further. Key Features 5 dBi Gain – Higher gain for extended...
GNSS All-Band High Precision Antenna - 5m (SMA) - SparkFun Electronics
·
The u-blox ANN-MB2 is a high-precision multi-band active GNSS antenna designed for centimeter-level positioning accuracy. Supporting L1/L2/L5/E6/B3 frequency bands across multiple satellite constellations, this antenna is ideal for demanding precision applications like RTK surveying, autonomous v...
915MHz LoRa Antenna RP-SMA - 1/4 Wave 2dBi
A compact 1/4-wave rubber duck antenna for LoRa and other 860–960MHz communication. With a centre frequency of 915MHz and 2dBi gain, this 110mm antenna is ideal for space-constrained LoRa nodes where a smaller antenna is preferred. Specifications Frequency Range – 860–960MHz (centre 915MHz) G...
2.4GHz Duck Antenna RP-SMA
A 2.4 GHz rubber duck antenna with 2.2 dBi gain and a reverse-polarity SMA (RP-SMA) connector. At 100 mm (4″) long with 50 Ω impedance, it's a straightforward way to add an external antenna to WiFi, Bluetooth, ZigBee, or other 2.4 GHz RF modules. Key Features 2.2 dBi Gain – Omni-directional co...
SparkFun GPS-RTK-SMA Kit
The SparkFun GPS-RTK-SMA Kit provides everything you need to get started with centimetre-level GPS accuracy using the u-blox ZED-F9P module. Capable of 10mm three-dimensional positioning accuracy with RTK corrections, this kit is ideal for precision navigation, surveying, and autonomous vehicle a...
GNSS Multi-Band Magnetic Mount Antenna - 5m (SMA)
The ANN-MB-00 GNSS multiband antenna is extremely unique from other GNSS/GPS antennas in that it is designed to receive both the classic L1 GPS band and the newly launched (started in 2005) L2 GPS band. Additionally, the ANN-MB-00 from u-blox is extremely well built with both a magnetic base with...
Bus Pirate Cable
This is an interface cable for the Bus Pirate, designed to connect to its 2x5 I/O header. The cable’s connector is composed of two rows of five 0.1" spaced pins; it’s also polarized, as is the mating connector on-board the Bus Pirate, so you can only connect the cable in one direction. The lea...
RP-SMA Female 0.8mm PCB Edge-Mount Connector
·
This RP-SMA connector is designed for edge-mounting onto a PCB, making it handy for RF prototyping and compact antenna connections.It is suited to GPS and cellular projects that need an external antenna connection brought directly to the board edge. Each connector is fitted with a female signal p...
XBee 3 Pro Module - RP-SMA Antenna
After years of popularity with the XBee Series 1 and XBee Series 2 Pro Modules, we now have the XBee Series 3 Pro which brings the best of both worlds. XBee 3 not only handles 802.15.4, and ZigBee, but also BLE protocols and you can now talk to the modules over UART or SPI as well. With a 300ft i...
Edge-Launch SMA Connector for 0.8mm / 0.031 Slim PCBs
·
This is a great connector for anyone doing RF work, when an SMA connector is required. It hugs the edge of a "half thickness" 0.031" thick PCB (or thinner!) and 'launches' off of the edge. We like these for their ease of soldering and low profile. Mates with any SMA plug, we also have an SMA to R...
XBee WiFi Module - RP-SMA Connector
This is the XBee WiFi Module with RP-SMA connector from Digi. XBee WiFi embedded RF modules provide simple serial to IEEE 802.11 connectivity. By bridging the low-power/low-cost requirements of wireless device networking with the proven infrastructure of 802.11, the XBee WiFi creates new wireless...
900MHz Duck Antenna RP-SMA
A 900/1800MHz dual-band duck antenna with 2dBi gain and an RP-SMA connector. Well suited for XBee 900MHz modules and other 900MHz radio applications. 50-ohm impedance, 105mm long. Specifications Frequency – 900/1800MHz dual-band Gain – 2dBi Connector – RP-SMA Impedance – 50 ohm Length – 10...
Alchitry Ft V2
·
The Ft V2 is designed for Alchitry projects that need to move a lot of data in or out of a design. It is built around the FT600Q, which is capable of up to 200MB/s.In real-world use, bandwidth will be a little lower; the supplier notes they have achieved about 190MB/s from the Ft. This makes it a...
Edge-Launch SMA Connector for 1.6mm / 0.062 Thick PCBs
·
This is a great connector for anyone doing RF work, when an SMA connector is required. It hugs the edge of a standard 0.063" thick PCB and 'launches' off of the edge. We like these for their ease of soldering and low profile. Mates with any SMA plug, we also have an SMA to RP-SMA in case your ant...
