All Products

SKU: PL-1037

The 0.100″ (2.54 mm) 2×20-Pin Straight Female Header is a double-row, 40-pin socket strip designed to mate with standard 0.1″ pitch male headers. This is the standard GPIO header size used on Raspberry Pi and other single-board computers, making it an essential connector for SBC projects. The 2×...

SKU: AF-4933

A 25cm flexible flat cable (FFC) with 40 pins at 0.5mm pitch and Type A-B connections (contacts on opposite sides at each end). Designed for use with 40-pin FPC-to-IDC adapter PCBs to extend Raspberry Pi GPIO connections or other 40-pin ribbon cable applications. Pair this cable with compatible ...

SKU: AF-4132

The Adafruit GPIO Expander Bonnet adds 16 extra digital I/O pins to your Raspberry Pi over I²C. Based on the MCP23017 chip, it plugs directly onto the Pi's 40-pin header and communicates via SDA/SCL, leaving your other GPIO pins free. Each pin can be configured as a digital output (up to 20 mA pe...

SKU: AF-3120

Make your own custom HDMI input or HDMI interface with ease, using this HDMI Socket to Terminal Block Breakout. You get a nice solid PCB with an HDMI socket and two strips of terminal blocks that you can use with stranded or solid core wire to assemble your own wiring jigs. We recommend this...

SKU: SF-PRT-16763

This 2x20 pin female header is meant to allow you to extend the reach of any board with the standard 2x20 GPIO pin footprint like the Raspberry Pi, Google Coral, and NVIDIA Jetson. You can also solder it to Pi HATs that do not have headers on the board. This is assuming that the board is only pop...

SKU: SF-BOB-11189

The ‘must have’ IC for TTL/CMOS projects finally has its own breakout board! This is the RS232 converter IC that is capable of running at 3V and communicating with 5V logic.We’ve taken the SOIC package MAX3232 and broken out all the pins you need to set up your RS232 to TTL connection. We’ve also...

SKU: AF-4701

The Adafruit ST25DV16K is a unique I2C-programmable RFID EEPROM breakout that works with mobile phones as an ISO/IEC 15693 (13.56 MHz) NFC tag, but can be dynamically rewritten over I2C by a microcontroller. This makes it ideal for projects where you need to change tag content on the fly — for ex...

SKU: AF-4197

Add a crisp, paper-like display to your microcontroller project with the Adafruit 2.13" Monochrome eInk Breakout. This 250×122 pixel black-and-white eInk panel delivers excellent daylight readability and retains its image even with power completely disconnected — just like printed paper. An onbo...

SKU: SF-PRT-14017

This 2x20 “tall” header has the same number and spacing of pins as a Raspberry Pi and provides your board with the ability to extend the heights of your GPIO to accommodate for enclosures or other parts that can encapsulate your Pi. This through-hole header has 40 0.1"-spaced pins and can just...

SKU: AF-2822

If we could eat headers, we'd have them for breakfast, lunch, and dinner.  But we can't :( So we're making the best of it and selling them! This 2x20-pin strip male header is a great way to add pins to 2x20 0.1" holes in a PCB.  They're also perfect companion p...

SKU: SF-BOB-13282

This is a breakout board for the WS2812B RGB LED. The WS2812B is actually an RGB LED with a WS2811 built right into the LED! All the necessary pins are broken out to 0.1" spaced headers for easy bread-boarding. Several of these breakouts can even be chained together to form a display or an addres...

SKU: AF-3211

The Adafruit RGB Matrix Bonnet makes it easy to drive HUB75-type RGB LED matrices directly from your Raspberry Pi. Simply plug the bonnet onto any Pi with a 40-pin GPIO header, connect your matrix via the IDC cable, attach a 5 V power supply, and run the provided Python code to create colourful s...

SKU: SF-BOB-11722

This is a clever little breakout board for both the RGB and R/G illuminated rotary encoders. On one side, it breaks out all of the RGB pins to standard, breadboard friendly, 0.1" headers. Turn it over and it has a footprint for the R/G version! Simply solder an encoder down to the board and you’r...

SKU: AF-2711

With the Pi-EzConnect you can connect all sorts of electronics to a single Raspberry Pi  with no soldering or breadboarding! This HAT has screw-terminals for each pin on the Pi Header Key features: Solderless or soldered connections for all GPIO’s on a Raspberry Pi Mini proto area for...

SKU: AF-1988

That new Raspberry Pi® Model B+ computer you just got has a row of 2x20 pin headers soldered on - those are the GPIO (general purpose input/output) pins and for those of us who like to hack electronics they are where the real fun is. By programming the Pi, you can twiddle those pins high or low, ...

SKU: AF-6038 · MPN: ADA6038

The Adafruit SPI Flash SD Card breakout features an XTSD 2 GB chip — an SD card in an SMT package that you can wire up like standard SPI flash but use with existing SD card libraries. It comes pre-formatted as a 2 GB FAT volume and works straight away with the built-in SD library in Arduino or th...

SKU: AF-3015

This is the Custom Gamepad PCB for the PiGRRL 2 pack! The board is designed for use in portable gaming projects like the PiGRRL 2 but it's basically everything-you-need to make your very own DIY gaming project with GPIO input We've dramatically cut the build time in half of the PiGRRL 2 pack&n...

SKU: AF-2105

This little 2x3 (6 pin - 0.1 spaced) IDC Breadboard Helper is great in conjunction with our 6-pin IDC cable. It comes in two parts, a 'pin-through' socket and a male header. The socket straddles the center of a breadboard or Perma-Proto and then header p...

SKU: AF-5294

This 20-pin GPIO ribbon cable provides a clean, reliable connection between PCBs, development boards, and breakout headers. The soft, flexible 0.05″ ribbon cable with keyed IDC connectors on both ends ensures correct orientation every time. Pin 1 is marked with a pink stripe along the side of th...

SKU: SF-COM-12792

This is a 2x40 pin right-angle PTH header. This header can be broken apart with a fair amount of force to form smaller header formations. Don’t worry, it’s easy enough to break it where you need! Each pin has a spacing of 0.1" in between each other. Documents: Datasheet