All Products
Showing 21-40 of 58 products · 2 unavailable products hidden
RS485 Connector Expansion Shield for LattePanda Alpha&Delta
Gravity: Flexible 8x32 RGB LED Matrix
Gravity:Digital RED LED Light Module
Gravity: Flexible 8x8 RGB LED Matrix
Gravity: Flexible 16x16 RGB LED Matrix
Gravity: Non-contact Arduino Water / Liquid Level Sensor
Gravity: GP8101S 1-Channel PWM to 0-5V/10V DAC Module
MPN: DFR1036
Arduino Sensor Shield Expansion Board v5
Gravity 3-Pin PH2.0 to DuPont Male Cable Pack 30cm
MPN: FIT0897
Gravity: Digital Adjustable Infrared Proximity Sensor for Arduino (0~200 cm)
RS485 Waterproof Ambient Light Sensor (0-200,000 Lux)
MPN: SEN0644
Cookie I/O Expansion Shield
DFRobot Building Block Expansion Board Bundle for UNIHIKER M10
MPN: MBT0044-1
Gravity: Arduino Gas Sensor (MQ2)
Gravity: I/O Expansion Shield for Pyboard
Mega Multi IO Shield For Arduino Mega / DUE
Micro:Mate - A Mini Expansion Board for micro:bit (Gravity Compatible)
micro:IO Extender- a micro:bit IO Expansion Board
Gravity: Digital RGB LED Module
Gravity: Analog Turbidity Sensor For Arduino
RS485 Connector Expansion Shield for LattePanda Alpha&Delta
This industrial-grade RS485 shield from DFRobot is specially designed to expand two parallel RS485 ports (terminal) with high reliability for LattePanda Alpha and LattePanda Delta. Employing FTDI USB to serial port chip and industrial-grade isolated transceiver module, the shield comes with the c...
Gravity: Flexible 8x32 RGB LED Matrix
Good news! There is a new member in to the Gravity family - The Flexible 8x32 RGB LED Matrix! This module is a square panel with a soldered XH2.54 3-pin interface with pin mappings that perfectly match the Arduino I/O expansion shield. This flexible 8x32 RGB full-color LED matrix module...
Gravity:Digital RED LED Light Module
A simple red LED module with a Gravity 3-pin digital interface for plug-and-play connection to Arduino and other microcontrollers via a Gravity IO Expansion Shield. Ideal for beginners learning digital output control. Key Features Gravity Interface – 3-pin plug-and-play connection Digital Con...
Gravity: Flexible 8x8 RGB LED Matrix
Good news everyone! We have a new member to the Gravity family - The Flexible 8x8 RGB LED Matrix! This module is a square panel with a soldered XH2.54 3-pin interface with pin mappings that perfectly match the Arduino I/O expansion shield. This flexible 8x8 RGB full-color LED matrix module...
Gravity: Flexible 16x16 RGB LED Matrix
Good news! There is a new member in to the Gravity family - The Flexible16x16 RGB LED Matrix! This module is a square panel with a soldered XH2.54 3-pin interface with pin mappings that perfectly match the Arduino I/O expansion shield. This flexible 16x16 RGB full-color LED matrix mo...
Gravity: Non-contact Arduino Water / Liquid Level Sensor
A non-contact liquid level sensor that detects the presence of liquid through a container wall — no direct contact with the liquid required. Using advanced signal processing via the XKC-Y25-T12V chip, it works through most non-metallic containers including plastic, glass, and ceramic. This makes...
Gravity: GP8101S 1-Channel PWM to 0-5V/10V DAC Module
· MPN: DFR1036
A 1-channel DAC module that converts a PWM signal from any microcontroller into a precise 0–5V or 0–10V analogue voltage output. Built around the GP8101S chip with 8-bit resolution and 0.2% accuracy, it's ideal for driving standard 0–10V or 0–5V controlled devices in automation projects — lights,...
Arduino Sensor Shield Expansion Board v5
Build your electronics projects easier than ever with the use of this sensor shield expansion board. It makes connecting many input devices and output devices to the correct Arduino pins. This great board definitely comes in great quality and at an amazing price. A must-have for your electroni...
Gravity 3-Pin PH2.0 to DuPont Male Cable Pack 30cm
· MPN: FIT0897
This pack includes ten 30 cm Gravity analogue sensor cables, each with a 3-pin PH2.0 plug on one end and DuPont male connectors on the other.The cables are compatible with breadboard and DuPont wire spacing, making them handy for connecting DFRobot analogue sensors to an IO Expansion Shield or IO...
Gravity: Digital Adjustable Infrared Proximity Sensor for Arduino (0~200 cm)
A digital infrared proximity sensor with adjustable detection range from 0 to 200 cm. Outputs a simple digital signal — HIGH when an obstacle is detected, LOW when clear. The detection threshold is adjustable via a rear-mounted screw, making it easy to tune for different applications. Features t...
RS485 Waterproof Ambient Light Sensor (0-200,000 Lux)
· MPN: SEN0644
Introduction The Waterproof Digital Ambient Light Sensor is a durable and versatile device designed to measure light intensity from 0 to 200,000 Lux. It utilizes the Modbus-RTU 485 communication protocol and operates on a DC 5-32V power supply, ensuring seamless integration with systems like Ardu...
Cookie I/O Expansion Shield
INTRODUCTION The Cookie I/O expansion shield is designed for beginners to electronics. The shield is directly compatible with the gravity series. We have implemented fail-safe systems to prevent bad connections from destroying the board. The board is protected from reve...
DFRobot Building Block Expansion Board Bundle for UNIHIKER M10
· MPN: MBT0044-1
This bundle adds motor, servo and sensor expansion to the UNIHIKER M10 single-board computer, using the included Type-C to HY2.0-4P communication cable to bridge the M10 to the expansion board.The board includes an integrated 18650 battery holder so your controller, motors and sensors can run fro...
Gravity: Arduino Gas Sensor (MQ2)
INTRODUCTION This is a generic Arduino gas sensor. It has MQ2 probe which is able to detect LPG, i-butane, propane, methane ,alcohol, Hydrogen, smoke.It can be used in gas leakage detecting device in consumer and industry markets. It has a high sensitivity and fast response time. ...
Gravity: I/O Expansion Shield for Pyboard
The Gravity I/O Expansion Shield for Pyboard connects your Pyboard v1.1 to the DFRobot Gravity sensor and module ecosystem with colour-coded plug-and-play connectors. No soldering is required — simply plug Gravity-compatible sensors and modules into the clearly labelled ports. An onboard externa...
Mega Multi IO Shield For Arduino Mega / DUE
The Mega Multi IO Expansion Shield lets you stack up to four shields simultaneously on an Arduino Mega or Due without worrying about I/O pin conflicts. All Mega I/O pins are expanded and routed to four separate shield slots, keeping your project clean and tidy with organised cabling. Key Feature...
Micro:Mate - A Mini Expansion Board for micro:bit (Gravity Compatible)
Micro:Mate is a tiny micro:bit I/O expansion board for learning electronics and building DIY projects.Micro:Mate expands 6 sets of 3-pin I/O interfaces, capable of connecting DFRobot Gravity series modules, servo motors, sensors and jumper wires. Additionally, Pin 8, 12, 16 support voltage switch...
micro:IO Extender- a micro:bit IO Expansion Board
The micro:IO Extender is a compact expansion board for the BBC micro:bit that breaks out all 19 I/O pins as Gravity-compatible 3-pin headers. It provides plug-and-play access to the full range of micro:bit GPIO, along with dedicated I2C and serial port headers, an onboard buzzer with switch, and ...
Gravity: Digital RGB LED Module
Gravity: Digital RGB LED Module is a cascadable single RGB LED module compatible with RGB LED strip. The Gravity interface provides a more elegant manner for the connections between modules and most of mainstream controllers such as Arduino, micro:bit, Firebeetle Series, LattePanda, and Raspberry...
Gravity: Analog Turbidity Sensor For Arduino
The Gravity Analog Turbidity Sensor measures water clarity by detecting the level of suspended particles. It works by measuring light transmittance and scattering rate, which change with the amount of total suspended solids (TSS) in the water. The sensor provides both analogue (0–4.5V) and digit...
