All Products

SKU: PL-3216

A high-power 12V brushed DC gearmotor in the Pololu 25D form factor (25mm diameter) with a 34.014:1 metal spur gearbox and an integrated 48 CPR quadrature encoder. The encoder provides 1632.67 counts per revolution of the gearbox output shaft, enabling precise speed and position control for robot...

SKU: DF-FIT0186

This is a Gear Motor w/Encoder, model No.GB37Y3530-12V-251R. It is a powerful 12V motor with a 43.8:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 16 counts per revolution of the motor shaft, which corresponds to 700 counts per revolution of the gearbox's outp...

SKU: DF-FIT0492-B

This is a metal DC geared motor, 100% pure copper coils, high-density molecular layer, 50:1 metal reducer, small size, large torque. The maximum torque could arrive 42 kg.cm, stable and durable! SPECIFICATIONS   Rated voltage: 12 V Gear reduction ratio: 50:1 D output shaft diameter: 6 mm N...

SKU: DF-FIT0495-I

This is a metal DC geared motor, 20:1 metal reducer. It has a small size and large torque. The maximum torque could arrive 0.7 kg.cm. It is stable and durable! SPECIFICATIONS Rated Voltage: 6 V Operating Voltage Range 2~7.5V Gear reduction ratio: 20:1 Gearbox length...

SKU: PL-3039

The 50:1 Micro Metal Gearmotor HPCB 12V is a compact brushed DC gearmotor from Pololu's popular micro metal gearmotor family. This high-power carbon brush (HPCB) variant operates at 12V and draws half the current of its 6V equivalent for the same performance, making it better suited to 12V system...

SKU: DF-FIT0495-B

This is a metal DC geared motor, 362:1 metal reducer. It has a small size and large torque. The maximum torque could arrive 7.5 kg.cm. It is stable and durable! SPECIFICATIONSRated Voltage: 6 V Operating Voltage Range 2~7.5V Gear reduction ratio: 362:1 Gearbox length:27 mm "D" shape shaft diame...

SKU: DF-FIT0564

This is a mini DC motor with a 1:35 reduction box. It has small size and takes up very little space. It uses metal gears which is durable. The D-shape shaft facilitates the installation of motor. The no-load speed is 570rpm and the noise is low.     In order to protect the service...

SKU: DF-FIT0486

INTRODUCTION A new micro metal gear motor with a difference! This motor comes with a built-in encoder which measures the motor's speed in real time. The average output number of pulses can reach up to 7*2*298 pulses per revolution. The motor has a long (0.354"/9.0 mm...

SKU: DF-FIT0495-H

This is a metal DC geared motor, 34:1 metal reducer. It has a small size and large torque. The maximum torque could arrive 1 kg.cm. It is stable and durable! SPECIFICATIONS Rated Voltage: 6 V Operating Voltage Range 2~7.5V Gear reduction ratio: 34:1 Gearbox lengt...

SKU: PL-1595

A 1000:1 micro metal gearmotor from Pololu's popular N20-size range, featuring a high-power (HP) 6V brushed DC motor with precious metal brushes. With the highest gear ratio available in this series, it delivers extremely low output speeds and very high torque relative to its tiny size. At 6V wi...

SKU: DF-FIT0419

INTRODUCTION This is a new micro DC geared motor, using planetary gear mechanism, applicable to the various types of DIY project. Especially the project which has a certain requirements for size. It will be a good partner for you. SPECIFICATION ...

SKU: DF-FIT0495-F

This is a metal DC geared motor, 75:1 metal reducer. It has a small size and large torque. The maximum torque could arrive 1.9 kg.cm. It is stable and durable! SPECIFICATIONS Rated Voltage: 6 V Operating Voltage Range 2~7.5V Gear reduction ratio: 75:1 Gearbox length...

SKU: DF-DFR0429

INTRODUCTION An ordinary DC motor requires an H Bridge to work with a microcontroller such as an UNO. For newcomers to electronics, the process of finding the right motor driver, connecting it to the MCU and learning the relevant electronic theory can be confusing an...

SKU: AF-4280

The Adafruit DC & Stepper Motor Bonnet drives up to 4 DC motors or 2 stepper motors from your Raspberry Pi, with full PWM speed control. It uses a dedicated PWM driver chip over I2C, so only two pins (SDA/SCL) are needed — leaving the rest free for other I2C devices or HATs. The TB6612 MOSFET mo...

SKU: PL-3070

A 1000:1 micro metal gearmotor from Pololu's popular N20-size range, featuring a high-power 6V brushed DC motor with long-life carbon brushes (HPCB). The carbon brushes offer significantly longer motor life compared to the precious metal brush (HP) version, while delivering the same performance. ...

SKU: DF-DFR0430

INTRODUCTION An ordinary DC motor requires an H Bridge to work with a microcontroller such as an UNO. For newcomers to electronics, the process of finding the right motor driver, connecting it to the MCU and learning the relevant electronic theory can be confusing and frustrating when you ju...

SKU: PL-1125

A compact, inexpensive brushed DC motor with a 120:1 plastic reduction gearbox, well suited for small robot builds. The motor is rated for 4.5V but runs comfortably in the 3–6V range. The gearbox output shaft is a 3mm D-shape, offset from and parallel to the motor shaft. A built-in safety clutch ...

SKU: PL-1120

A 200:1 plastic gearmotor with a 90-degree output shaft, offering a compact and affordable solution for small robot designs. The low-current brushed DC motor is well-suited for use with common motor drivers, and the recommended operating voltage range is 3–12V. The gearbox is fully enclosed and ...

SKU: PL-3245

This medium-power 12V brushed DC gearmotor features a 226.76:1 metal spur gearbox and an integrated 48 CPR quadrature encoder on the motor shaft, providing 10,884.47 counts per revolution of the gearbox output shaft for precise position and speed feedback. The gearmotor has a cylindrical form fa...

SKU: PL-1587

A low-power 6V brushed DC gearmotor with a 98.78:1 metal spur gearbox. The cylindrical motor body measures just under 25mm in diameter, and the D-shaped output shaft is 4mm in diameter, extending 12.5mm from the gearbox face plate. The low-power variant draws less current than the HP version, mak...