All Products

SKU: SF-DEV-22692

The Arduino Portenta C33 is a cost-effective industrial-grade module built around the Renesas R7FA6M5BH2CBG Arm Cortex-M33 microcontroller running at up to 200 MHz. It supports MicroPython and Arduino sketches, with onboard Wi-Fi, Bluetooth Low Energy, and 100 Mbps Ethernet for connected applicat...

SKU: DF-FIT0798

An M.2 (A+E Key) to Gigabit Ethernet adapter module designed for the LattePanda Alpha and Delta. Built around the Realtek RTL8111F controller, this module adds an RJ45 Gigabit Ethernet port via the M.2 slot, providing 10/100/1000 Mbps self-adaptive networking with low power consumption. Plug-and...

SKU: AF-4552

Power over Ethernet (PoE) splitters can make your project wiring a breeze - and best of all they work to connect any 802.3af-capable router to any Ethernet device, even if it doesn't natively support PoE! The splitter takes a unified PoE signal (data and power) from one RJ-45 cable, and then sepa...

SKU: WS-30619 · MPN: 30619

The Luckfox Pico Pi is a compact Linux micro development board powered by the Luckfox Core1106 processor. With 8 GB eMMC on-board storage, built-in Wi-Fi 6, Bluetooth 5.2/BLE, and a self-developed ISP3.2 image signal processor supporting up to 5 MP camera input, it is well suited for embedded vis...

SKU: DF-DFR0905

This is the first PLC equipment based on the Arduino Technology designed for a professional use. Taking Arduino Mega2560 as its core control chip, the M-Duino PLC has 17 I/Os including 4 analog and digital inputs, 2 interrupt isolated input, 3 analog outputs, 8 digital isolated relay outputs...

SKU: DF-DFR1083 · MPN: DFR1083

##Introduction The Arduino Portenta C33 is a streamlined module that offers the high performance of the Arduino Portenta family at a lower price point, thanks to optimizations and streamlined features. Ideal to developing cost-effective, real-time applications, the Portenta C33 features the ARM® ...

SKU: SF-CAB-10759

Integrating Ethernet support into your project is a great way to relay data through a local area network and even bounce information out to the internet. Sometimes it’s hard to get power to your Ethernet devices. Wouldn’t it be convenient to use the same cable for power and data? Using these powe...

SKU: SF-DEV-14134

The Arduino Industrial 101 is a compact WiFi evaluation board based on the Arduino 101 LGA module. Combining an ATmega32U4 microcontroller with an Atheros AR9331 MIPS Linux processor, it provides a powerful platform for IoT projects without the need for multiple shields. Similar to the Arduino Y...

SKU: DF-DFR0600

PYNQ-Z2 is a FPGA development board based on ZYNQ  XC7Z020 FPGA, intensively designed to support PYNQ, a new open-sources framework that enables embedded programmers to explore the possibilities of xilinx ZYNQ SoCs without having to design programming logic circuits. Benefiting from progr...

SKU: SS-103030002

The mbed Shield is an application board designed for the mbed LPC1768 prototyping platform. It brings together CAN, Ethernet, USB, and four standard Grove connectors on a single board, making it easy to connect sensors, actuators, and communication interfaces to your mbed projects. With a standa...

SKU: AF-435

Simplify your Internet of Things with a passive PoE injector cable. These are quite handy for projects that have Ethernet connectivity and also need a power cable. Of course, you can get a long Ethernet cable but then you have to figure out how to plug it in, making a mess of wires. There is an o...

SKU: SF-DEV-14643

The Raspberry Pi 3 Model B+ is a credit-card-sized single-board computer powered by a 64-bit quad-core ARM Cortex-A53 processor running at 1.4 GHz. Features dual-band Wi-Fi, Bluetooth 4.2/BLE, gigabit Ethernet (via USB 2.0), and Power over Ethernet (PoE) support with an optional HAT. Capable of ...

SKU: WS-18014

POE HAT FOR RASPBERRY PI Power Over Ethernet HAT For Raspberry Pi 3B+/4B, 802.3af-Compliant(Any Backward-Compatible Future Versions Will Be Supported As Well) OLED for real-time monitoring temperature, IP, and fan status The PoE HAT (B) is a 802.3af-compliant Power Over Ethernet accessory...

SKU: WS-30901 · MPN: 30901

Power your Raspberry Pi 5 or Compute Module 5 over Ethernet with this PoE HAT (H). Deliver both power and network connectivity through a single Ethernet cable—perfect for remote installations, clean setups, and locations without easy access to power outlets. The HAT features an isolated switched-...

SKU: SF-DEV-21280

Arduino Opta is a secure, easy-to-use micro PLC with Industrial IoT capabilities. Designed in partnership with Finder – leading industrial and building automation device manufacturer – Opta allows professionals to scale up automation projects while leveraging the Arduino ecosystem. Supporting bot...

SKU: AF-909

This handy Ethernet extension cable will make it easy for you to enclose a device that has an Ethernet port. We think this would be most useful when putting a Beagle Bone, Raspberry Pi, Arduino Ethernet into a box.The jack half has two mounting 'ears' with 4-40 screws installed, 1" inch / 25mm ap...

SKU: SF-PRT-10037

This is a front faceplate that lets your Crib for Arduino accommodate the Arduino and Ethernet Shield in one secure, clean looking, easy to acces package. Have you ever tried to punch or cut square holes for the Arduino USB, power jack, and Ethernet port? Wow, what a drag that is…nine miles of ...

SKU: WS-26399

Introducing the POE HAT for Raspberry Pi 5: Simplify Connectivity and Power!High Power, Onboard Cooling Fan, With Metal Heatsink, Supports 802.3af/at network standard Power Over Ethernet (PoE) HAT designed for Raspberry Pi 5, compliant with IEEE 802.3af/at network standards, offering a seamles...

SKU: SF-GPS-17722 · MPN: GPS-17722

Built around the u-blox ZED-F9P, this MicroMod carrier gives your project high-precision GNSS and RTK positioning in a swappable, solderless MicroMod format. It supports rover and base station operation, with RTK accuracy down to millimetre-level positioning when used with suitable correction dat...

SKU: RP-SC0073 · MPN: SC0073

The Raspberry Pi 3 Model B+ is a credit-card-sized single-board computer powered by a 1.4 GHz quad-core ARM Cortex-A53 processor with 1GB RAM. Add a keyboard, mouse, display, power supply, and a microSD card with your chosen Linux distribution and you have a fully functional desktop computer, med...