All Products

SKU: AF-4819

The Adafruit MagTag Starter Kit bundles everything you need to get started with the MagTag WiFi E-Ink display. The ESP32-S2-powered board features a 2.9" grayscale E-Ink screen that retains its image even when power is removed — perfect for low-power IoT dashboards, status boards, and information...

SKU: AF-4464

The Adafruit ICM-20649 breakout features a wide-range 6-DoF IMU capable of measuring up to ±30g acceleration and ±4000°/s gyroscope rotation — roughly double the range of standard IMUs. When typical ±16g accelerometers and ±2000°/s gyros aren't enough, this sensor delivers the extended measuremen...

SKU: PI-RPI-010

This kit comes with super handy adaptors for the mini-HDMI and micro-B USB On-The-Go ports for your new Raspberry Pi Zero! You'll need these adaptors to connect your Raspberry Pi Zero to normal HDMI screens and USB devices (like a keyboard or WiFi dongle). Need a case? Check out our Pibow Zero...

SKU: AF-1197

A compact dual-connector USB cable with a USB-A plug on one end and both Mini-B and Micro-B connectors on the other. The Micro-B connector carries data and power, while the Mini-B connector provides power only — handy for charging a device via Mini-B or connecting a Micro-B device for data transf...

SKU: AF-2769

The Circuit Playground Express Educator's Pack is a comprehensive classroom kit built around Adafruit's versatile Circuit Playground Express board. It includes everything educators need to teach electronics, coding, and wearable technology — from conductive thread and servos to battery packs and ...

SKU: AF-6057 · MPN: ADA6057

SKU: AF-5997 · MPN: ADA5997

The Adafruit CH334F Mini 4-Port USB Hub Breakout converts one USB host port into four downstream ports using the CH334F USB 2.1 hub chip. Designed to be compact and embeddable, it fits inside enclosures or existing devices where a standard USB hub would be too bulky. The upstream connection can ...

SKU: AF-5933 · MPN: ADA5933

The Adafruit ESP32-C6 Feather is built around Espressif's first Wi-Fi 6 SoC, combining 2.4 GHz Wi-Fi 6, Bluetooth 5 (LE), and 802.15.4 (Zigbee/Thread) in a single chip. The addition of 802.15.4 support makes it well-suited for Matter development and smart home applications. This Feather includes...

SKU: AF-5999 · MPN: ADA5999

The Adafruit CH334F Mini 2-Port USB Hub Breakout converts one USB host port into two downstream ports using the CH334F USB 2.1 hub chip. Designed to be compact and embeddable, it fits inside enclosures or existing devices where a standard USB hub would be too bulky. The upstream connection can u...

SKU: AF-2310

The Adafruit Perma-Proto HAT for Pi Mini Kit is a full-sized prototyping daughter board for any Raspberry Pi with a 2×20 GPIO header (Pi Zero, A+, B+, Pi 2, 3, 4, 5). It provides a grid of 0.1″ soldering holes connected in a familiar breadboard pattern — making it easy to transfer circuits from a...

SKU: AF-3405

The Adafruit HUZZAH32 ESP32 Feather Board brings the powerful Espressif ESP32 dual-core processor into the Adafruit Feather form factor. With WiFi, Bluetooth Classic, and BLE support, a built-in USB-to-serial converter, automatic bootloader reset, and LiPo battery charging, it's a fully featured ...

SKU: AF-3591

The Adafruit HUZZAH32 ESP32 Feather Board brings the powerful Espressif ESP32 dual-core processor into the Adafruit Feather form factor. With WiFi, Bluetooth Classic, and BLE support, a built-in USB-to-serial converter, automatic bootloader reset, and LiPo battery charging, it's a fully featured ...

SKU: AF-6241 · MPN: ADA6241

A custom-designed snap-on enclosure for the Adafruit Feather RP2040 with DVI Output Port. 3D printed using an SLA process in translucent milky white plastic, it provides a clean, protective case with no visible layer lines or surface imperfections. No screws or glue required — simply snap the Fe...

SKU: AF-5644 · MPN: ADA5644

The Adafruit 12V Bias Voltage Boost Converter uses the TI TPS61040 to generate 12V DC from as little as 3V input. This compact breakout is ideal for generating the bias voltage needed by OLED displays, LED string backlights, and FLASH/EEPROM reprogramming — without requiring a separate 12V supply...

SKU: SF-DEV-13614

The Qduino Mini is a compact, Arduino-compatible development board with built-in LiPo battery charging and a fuel gauge for monitoring battery level. Based on the ATmega32U4, it runs at 3.3V/8 MHz and measures just 2 × 3.8 cm — ideal for embedding in space-constrained projects. The board charges...

SKU: LB-ZERO2-KIT

The Pi Zero 2 W Kit includes the essentials for getting started with the Pi Zero W, including: Raspberry Pi Zero 2 W Mini HDMI to regular HDMI adapter  Micro USB to regular USB adapter A Pi Zero W Camera Connector 64GB MicroSD (Pre-loaded with NOOBS) A Pi Zero Case with Camera Enclosure ...

SKU: DF-DFR0351

INTRODUCTION Romeo BLE mini is a small Arduino compatible robot control board with motor driver and bluetooth 4.0. It benefits from the Arduino open source platform, which includes thousands of open source codes. Its integrated 2 way DC motor driver allows the projec...

SKU: SF-KIT-23091 · MPN: KIT-23091

Setting up a Pi Zero can mean tracking down a few specific cables and a suitable power supply, so this kit bundles the essentials in one package. It is centred around the compact Raspberry Pi Zero W, a small single-board computer suited to embedded builds and Internet of Things projects.The Pi Ze...

SKU: AF-899

A compact 6" (approx. 15cm) USB Type-A to Mini-B cable for USB 1.1 and 2.0 connections. Ideal for keeping on the bench when you need a short, tidy cable to connect to Teensy boards, USB LiPo chargers, or other Mini-B devices. Black finish. Key Features Connectors – USB Type-A to Mini-B Length...

SKU: AF-3447

A set of 18 colour-coded mini alligator clip test leads for solderless connections. Each 15″ (38cm) cable has a small, pointy alligator clip on both ends — ideal for gripping component leads, test points, and sewable pads on boards like micro:bit and Circuit Playground. Perfect for use with mult...