All Products

SKU: DF-DFR0650

This 0.96” OLED display module uses the SSD1306 drive chip, has 128x64 self-illuminating white pixels, and adopts two communication methods: SPI/ I2C, I2C in default. With its high contrast, simple wiring and low power consumption, it can be applied to many display applications, such as wearable ...

SKU: SF-LCD-13722 · MPN: LCD-13722

Add a tiny, crisp OLED to your next microcontroller project without taking up much space. This breakout carries a monochrome Blue-on-Black display that is only 64 pixels wide by 48 pixels tall, yet still has room for useful graphics, status screens and simple game interfaces.It is easy to drive f...

SKU: AF-2674

If you've been diggin' our monochome OLEDs but need something bigger, this display will delight you. These displays are 2.7" diagonal, and very readable due to the high contrast of an OLED display. This display is made of 128x64 individual white OLED pixels, each one is turned on or off by the co...

SKU: WS-25093

A 1.5-inch OLED display module with 128×128 resolution and black/white pixels. Built around the SH1107 driver chip with an ultra-narrow bezel, it supports both 4-wire SPI and I2C interfaces and includes an onboard voltage translator for compatibility with 3.3 V and 5 V microcontrollers. Waveshar...

SKU: AF-2900

A Feather board without ambition is a Feather board without FeatherWings! This is the FeatherWing OLED: it adds a 128x32 monochrome OLED plus 3 user buttons to any Feather main board. Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top of your Feat...

SKU: LB-LR0085

The 0.96″ 128×64 OLED Display Module delivers crisp, high-contrast visuals in a compact 27 × 27 mm package. Driven by the SSD1306 controller over I2C, it requires only two I/O pins and operates across a wide 3.3–5V range, making it compatible with Arduino, STM32, ESP32, and other popular microcon...

SKU: SF-LCD-24606 · MPN: LCD-24606

The SparkFun Qwiic OLED Display is a compact 0.91″ (diagonal) monochrome OLED screen with 128 × 32 pixel resolution, capable of displaying up to four lines of text. As an OLED, it has no backlight layer — resulting in a thinner profile, lower power consumption, and higher contrast compared to LCD...

SKU: AF-3531

The Adafruit 128×64 OLED Bonnet is a compact display add-on for Raspberry Pi, featuring a 1.3" diagonal monochrome OLED screen with a 5-way joystick and two pushbuttons. The high-contrast white OLED pixels are individually lit with no backlight required, delivering crisp, readable text and graphi...

SKU: WS-13992

A 1.5-inch OLED display module with 128×128 pixel resolution and 16-level greyscale, driven by the SSD1327 controller. Communicates via SPI or I2C interface (selectable via onboard resistor), and operates at both 3.3V and 5V logic levels. With a wide viewing angle of over 160° and true OLED cont...

SKU: AF-5297

The Adafruit Monochrome 1.12" OLED Display packs a 128×128 pixel resolution into a compact screen with the high contrast and crisp readability that OLED technology is known for. Each of the 16,384 white pixels is individually addressable, producing sharp text and graphics with no backlight requir...

SKU: DF-DFR0376

INTRODUCTION OCELL is a 0.5" micro OLED display designed for Arduino and other microcontrollers. This micro OLED display is small as the grown-up's fingernail- 0.5" only. It has 450cd/m^2 screen brightness with extremely high contrast and readability; moreover, it conta...

SKU: AF-4862

The Adafruit CYBERDECK Bonnet is a GPIO extender for the Raspberry Pi 400 that lets you plug any Pi bonnet, mini-HAT, or pHAT into the back of the Pi 400 at an angled position. It duplicates every GPIO pin from input to output, so your add-on boards work without any pin limitations. In addition ...

SKU: AF-6313 · MPN: ADA6313

Add a crisp monochrome display and simple user controls to your Feather project with this fully assembled FeatherWing. It combines a 128x64 white OLED screen with three user buttons labelled A, B and C, plus a reset button, so you can build compact menus, status displays, and handheld interfaces ...

SKU: AF-3356

The Adafruit Animated Eyes Bonnet (also known as the Snake Eyes Bonnet) is a Raspberry Pi accessory for driving two 128×128 pixel OLED or TFT LCD displays along with four analog sensor inputs. It's designed for creating animated eye effects in cosplay masks, props, sculptures, animatronics, robot...

SKU: AF-5128

The Adafruit MacroPad RP2040 Starter Kit is a complete programmable 3×4 macro keyboard powered by the Raspberry Pi RP2040 microcontroller. This all-in-one kit includes the MacroPad board, key switches, keycaps, enclosure, and hardware — ready to assemble with no soldering required. Program it wi...

SKU: SF-LCD-23453 · MPN: LCD-23453

The SparkFun Qwiic 1.3in OLED is a compact, easy-to-use display perfect for adding a visual element to your Arduino, Raspberry Pi, or other microcontroller projects. With a vibrant 1.3-inch OLED screen and a resolution of 128x64 pixels that deliver crisp white-on-black, it's ideal for displaying ...

SKU: AF-5996 · MPN: ADA5996

The Adafruit QT Py CH32V203 is a tiny development board built around the WCH CH32V203G6 — a low-cost RISC-V microcontroller running at up to 144 MHz. In the compact QT Py form factor (Seeed Xiao compatible), it packs USB-C, a STEMMA QT connector, an RGB NeoPixel, and 10 GPIO pins into a board sma...

SKU: AF-4863

The Adafruit CYBERDECK HAT is a GPIO extender for the Raspberry Pi 400 that lets you plug full-size HAT displays and add-on boards into the back of the Pi 400 at a convenient angle. It duplicates every GPIO pin from input to output, so your HATs work without any pin limitations. In addition to t...

SKU: AF-5100

The Adafruit MACROPAD RP2040 Bare Bones is a programmable 3×4 macro keyboard powered by the Raspberry Pi RP2040 microcontroller. It comes with a 128×64 OLED display, rotary encoder with push-button, speaker, and 12 NeoPixel LEDs — everything except the key switches and keycaps, so you can customi...

SKU: EF-EF05016 · MPN: EF05016

This is an OLED display in 128×64. It has a slim profile, high brightness, high contrast, and a large screen. We can use it to display the recorded temperature, humidity, date, and other information, giving it practical daily functions. PlanetX OLED