All Products

SKU: AF-2454

The Adafruit DPI TFT Kippah connects a 40-pin TTL TFT display directly to your Raspberry Pi's GPIO header, bypassing the need for an HDMI encoder/decoder. The result is a fast, native 18-bit colour display with full graphics acceleration and instant refresh — the same quality you'd expect from an...

SKU: AF-5400

The Adafruit ESP32 Feather V2 is a major redesign of the original HUZZAH32 ESP32 Feather, featuring 8 MB flash, 2 MB PSRAM, USB-C, a STEMMA QT port, a NeoPixel, and a user button. The dual-core ESP32 at 240 MHz provides Wi-Fi and Bluetooth Classic/LE connectivity for wireless and IoT projects. D...

SKU: AF-1492

Break out those tricky 0.5 mm pitch flex cable connections to breadboard-friendly 0.1" spaced headers with this FPC adapter board. The 50-pin connector on top accommodates most ZIF and snap-style FPC connectors, and each pin is broken out to a standard 0.1" × 0.1" header pad for easy prototyping....

SKU: AF-6035 · MPN: ADA6035

A 22-pin flexible flat cable (FPC) with 0.5mm pitch, 10cm in length. This A-B style cable has matching pin orientation on both ends — pin 1 on one side aligns with pin 1 on the other — making connections straightforward. Designed to work with Raspberry Pi 5 DSI/CSI connectors and RP2350 boards w...

SKU: AF-6396 · MPN: ADA6396

This bare eInk/ePaper display is a large 7.5 inch monochrome panel with 800 x 480 pixels, designed for low-power projects where the image needs to stay visible even after power is removed.Electronic paper displays are high contrast and easy to read in daylight, giving a paper-like look that suits...

SKU: SF-COM-29200 · MPN: COM-29200

This compact connector is a 16-pin, surface-mount ZIF FPC connector with a 0.5mm pitch, suited to connecting compatible flat flexible cables to your PCB.It uses a right-angle layout with contacts on both the top and bottom, helping support dual-contact cable arrangements in tight designs. The fli...

SKU: DF-FIT0691 · MPN: FIT0691

This 20cm 18-pin FPC flat flex ribbon cable is made for connecting compatible display modules and controller boards that use the GDI interface. Its reverse 18-pin layout and 0.5mm pitch suit compact display projects where tidy, low-profile internal wiring is needed.The flexible polyimide-based ri...

SKU: AF-6034 · MPN: ADA6034

A compact 22-pin flexible flat cable (FPC) with 0.5mm pitch, just 5cm in length. This A-B style cable has matching pin orientation on both ends — pin 1 on one side aligns with pin 1 on the other — ideal for compact builds where the peripheral sits close to the main board. Designed to work with R...

SKU: AF-6394 · MPN: ADA6394

E-Ink and E-Paper panels are excellent for low-power projects that need a daylight-readable display. The image remains visible even when power is disconnected, giving a high-contrast, paper-like result that suits signage, labels, dashboards and other static displays.This bare 3.7 inch tri-colour ...

SKU: AF-6381 · MPN: ADA6381

E-Ink and ePaper panels are ideal for low-power projects where the image needs to stay visible without continuous power. This bare 4.2 inch display has a paper-like, high-contrast look that remains readable in daylight and keeps its image even when power is disconnected.This is the display elemen...

SKU: AF-3814

For a really long time we assumed that the JST PH didn't have a free-hanging male header version. But then we found this JST-PH 2-pin Male Cable, and we were like, this is perfect! It's not a genuine JST connector, but it's 100% compatible with a nice clicky connection that you can ...

SKU: AF-5220

If you have a USB Type C port on your computer over here and you want to connect something over there then this extension cable will do the job right quick!This cable is 1 meter long, with all the pins connecting from one side to the other.

SKU: AF-4524

This 24-pin FFC/FPC extender lets you connect two 24-pin 0.5mm pitch flexible flat cables end-to-end, extending the total cable length. A simple solution when your existing cable isn't long enough to reach. Key Features 24-Pin, 0.5mm Pitch – Matches standard 24-pin FFC/FPC cables End-to-End E...

SKU: AF-6392 · MPN: ADA6392

E-Ink and ePaper panels are ideal for low-power projects where you want a daylight-readable display that keeps showing its image even when power is removed. This bare 2.66 inch panel gives you a crisp, paper-like monochrome display for DIY eInk builds.This is the display element only, so it needs...

SKU: SF-CAB-28302 · MPN: CAB-28302

A short 22-pin flexible flat cable (FPC) with 0.5mm pitch, just 5cm in length. This A-B style cable has matching pin orientation on both ends – pin 1 on one side aligns with pin 1 on the other – ideal for compact builds where the camera or display sits close to the main board. The short length m...

SKU: AF-5386

A 26-pin flexible flat cable (FPC) with 1mm pitch, 20cm in length. FPC cables are ultra-thin and flexible, making them ideal for tight spaces where round cables would be too bulky. This cable is commonly used for connecting laptop floppy drives and other 26-pin peripherals. Key Features 26 Pin...

SKU: SF-CAB-15455

This panel mount USB-C extension cable enables you to more easily enclose a project that contains a USB-C port. The cable is 6" in length and includes two 14mm M3 screws compatible with the cable's 3mm panel mount holes, spaced 18mm apart.

SKU: AF-4230

A 24-pin 0.5mm pitch FPC extension cable, 25cm long, designed for mounting eInk and ePaper displays at a distance from the driver board. Use this cable when you need to position your display remotely — for example, in a case, frame, or enclosure separate from the main electronics. Simply pry ope...

SKU: DF-FIT0630

A 30-pin FPC cable designed specifically for connecting the LattePanda Alpha and Delta single-board computers to their 7-inch eDP display. The ultra-thin, flexible design with interference shielding ensures reliable video signal transmission in compact builds. Key Features LattePanda Compatibl...

SKU: AF-2717

The TCA9548A 1-to-8 I2C multiplexer solves the common problem of needing multiple I2C devices with the same address on a single bus. It acts as a gatekeeper, routing I2C traffic to any of its eight downstream channels on command. Simply write a single byte to the multiplexer's I2C address (defau...