All Products

SKU: PH-102895

A 150mm GPIO ribbon cable for Raspberry Pi with a 2×20 male connector on one end and a 2×20 female connector on the other. Extends the full 40-pin GPIO header for use with HATs, Bonnets, and other accessories at a distance from the board. Works with any 40-pin Raspberry Pi, including the Pi 400 ...

SKU: AF-4687

The Adafruit 2.13" Monochrome E-Ink Bonnet brings crisp, paper-like displays to your Raspberry Pi with no soldering required. Simply plug this pre-assembled bonnet onto any Pi with a 2×20 header and start displaying high-contrast black-and-white graphics that remain visible even with power discon...

SKU: SF-PRT-14275

This 2x20 male header has the same number and spacing of pins as a Raspberry Pi but is best served when used in conjunction with the Pi Zero since they come with a space of unpopulated headers. This through-hole header has 40 0.1"-spaced pins and can just be snapped into place with minimal sol...

SKU: SF-PRT-29327 · MPN: PRT-29327

Build a neater, sturdier Raspberry Pi stack with this hardware kit for mounting a standard Pi HAT. It is designed for Raspberry Pi 3, 4 and 5 boards, including builds where a larger cooling fan or heat sink needs extra clearance.The included tall 2x20 pin female GPIO header raises the HAT above t...

SKU: AF-2222

Connect your own PCB to a Raspberry Pi B+ with this normal-height female header.  The female header part is about 8.5mm tall, good for small HATs that do not to clear the USB/Ethernet jacks. This header has 3mm of pins, compared with our stacking version which is the same base height but ...

SKU: AF-5294

This 20-pin GPIO ribbon cable provides a clean, reliable connection between PCBs, development boards, and breakout headers. The soft, flexible 0.05″ ribbon cable with keyed IDC connectors on both ends ensures correct orientation every time. Pin 1 is marked with a pink stripe along the side of th...

SKU: AF-4897

A 40-pin FPC to right-angle 2×20 IDC male plug header adapter board. Converts a standard 40-pin 0.5mm pitch FPC/FFC cable connection into a male GPIO plug, allowing you to connect HATs and Bonnets at a distance from your Raspberry Pi via a slim, flexible cable. Insert the male plug into your HAT...

SKU: LB-LR0387

This is the assembled version of the Pi T-Cobbler Plus.  It only works with the Raspberry Pi Model Zero, A+, B+, Pi 2, Pi 3 & Pi 4! (Any Pi with 2x20 connector)Each order comes with a 40 pin ribbon cable and assembled T-Cobbler Plus. You can plug the 40-pin GPIO cable between th...

SKU: AF-4114

The Zero2Go Omini is a multi-channel power supply board that sits on top of any Raspberry Pi with a 2×20 header. It accepts up to three separate power inputs and automatically selects the one with the highest voltage, making it perfect for projects that need backup power or flexible power source ...

SKU: AF-4904

A 40-pin FPC to straight 2×20 IDC male plug header adapter board. Converts a standard 40-pin 0.5mm pitch FPC/FFC cable connection into a male GPIO plug, allowing you to connect HATs and Bonnets at a distance from your Raspberry Pi via a slim, flexible cable. Insert the male plug into your HAT or...

SKU: AF-1658

Connect your own PCB to a Raspberry Pi with this extra-tall female header. The female header part has extra spaces to make it 13.6mm tall: when placed on your Pi, a PCB will clear the Ethernet and USB jacks. This header has 3mm of pins, compared with our stacking version which is the same base...

SKU: AF-2348

The Adafruit DC & Stepper Motor HAT drives up to 4 DC motors or 2 stepper motors from your Raspberry Pi, with full PWM speed control. It uses a dedicated PWM driver chip over I2C, so only two pins (SDA/SCL) are needed — leaving the rest free for other I2C devices or HATs. The TB6612 MOSFET motor...

SKU: AF-4280

The Adafruit DC & Stepper Motor Bonnet drives up to 4 DC motors or 2 stepper motors from your Raspberry Pi, with full PWM speed control. It uses a dedicated PWM driver chip over I2C, so only two pins (SDA/SCL) are needed — leaving the rest free for other I2C devices or HATs. The TB6612 MOSFET mo...

SKU: AF-6358 · MPN: ADA6358

Build large, colourful HUB75 RGB LED matrix displays from a Raspberry Pi without the usual jumper-wire tangle. This Adafruit Bonnet plugs onto the 40-pin GPIO header and drives three parallel matrix strings using the active3 pinout, so it can handle roughly three times as many panels or pixels as...

SKU: AF-1988

That new Raspberry Pi® Model B+ computer you just got has a row of 2x20 pin headers soldered on - those are the GPIO (general purpose input/output) pins and for those of us who like to hack electronics they are where the real fun is. By programming the Pi, you can twiddle those pins high or low, ...

SKU: AF-4933

A 25cm flexible flat cable (FFC) with 40 pins at 0.5mm pitch and Type A-B connections (contacts on opposite sides at each end). Designed for use with 40-pin FPC-to-IDC adapter PCBs to extend Raspberry Pi GPIO connections or other 40-pin ribbon cable applications. Pair this cable with compatible ...

SKU: AF-2711

With the Pi-EzConnect you can connect all sorts of electronics to a single Raspberry Pi  with no soldering or breadboarding! This HAT has screw-terminals for each pin on the Pi Header Key features: Solderless or soldered connections for all GPIO’s on a Raspberry Pi Mini proto area for...

SKU: AF-3578

Pimoroni's HyperPixel features a 4.0" display with 800x480 18-bit color pixels and a capacitive touch overlay, making it more sensitive and responsive than a resistive touch display. The plate uses the high speed DPI interface on the Pi and can use the mini display as a console, X window port, di...

SKU: AF-4855

A 2×2 (4-pin) female socket riser header with standard 2.54 mm (0.1 in) pitch, designed to fit the PoE header on the Raspberry Pi 3 B+ and 4. Use it alongside a 2×20 stacking header to raise the PoE HAT high enough to stack another HAT underneath. Specifications Configuration – 2×2 (4-pin) fem...

SKU: AF-3015

This is the Custom Gamepad PCB for the PiGRRL 2 pack! The board is designed for use in portable gaming projects like the PiGRRL 2 but it's basically everything-you-need to make your very own DIY gaming project with GPIO input We've dramatically cut the build time in half of the PiGRRL 2 pack&n...