All Products

SKU: AF-1478

A 16mm illuminated pushbutton with a built-in white LED and latching on/off action. Press once to switch on, press again to switch off — ideal for power switches, mode selectors, and control panels. The LED is wired independently from the switch contacts, giving you full control over when the li...

SKU: DF-SEN0682 · MPN: SEN0682

This compact full-solid-state LiDAR module uses a 64×8 DTOF matrix to measure 512 points at once, giving robots and automation projects a wider view of what is directly ahead. It is designed for forward obstacle avoidance, local blind spot detection and other short-range 3D perception tasks.Direc...

SKU: AF-1502

A clean, rounded 16mm panel-mount momentary pushbutton in yellow. This normally-open micro-switch connects the contacts only while pressed, making it a straightforward input for any project enclosure or control panel. Key Features Momentary Action – Normally open; contacts connect only while p...

SKU: AF-1479

A 16mm illuminated pushbutton with a built-in white LED and momentary action. The switch contacts connect only while the button is held down and return to their normally-open state when released — perfect for trigger inputs, action buttons, and interactive controls. The LED is wired independentl...

SKU: AF-1444

A 16mm illuminated pushbutton with a built-in yellow LED and latching on/off action. Press once to switch on, press again to switch off — ideal for power switches, mode selectors, and control panels. The LED is wired independently from the switch contacts, giving you full control over when the l...

SKU: AF-1441

A 16mm illuminated pushbutton with a built-in yellow LED and momentary action. The switch contacts connect only while the button is held down and return to their normally-open state when released — perfect for trigger inputs, action buttons, and interactive controls. The LED is wired independent...

SKU: AF-1443

A 16mm illuminated pushbutton with a built-in green LED and latching on/off action. Press once to switch on, press again to switch off — ideal for power switches, mode selectors, and control panels. The LED is wired independently from the switch contacts, giving you full control over when the li...

SKU: SF-COM-11967

This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough, small, panel-mount momentary switch with an illuminated blue LED ring. It is a SPDT with 16mm threading and 1mm pitch. This button is perfect for basic On/Off functions. Overall len...

SKU: SF-COM-11968

A heavy-duty, panel-mount momentary pushbutton with an illuminated green LED ring. Built from stainless steel with IP65 weatherproofing, this 16 mm threaded switch is tamper-resistant and designed for demanding environments. The SPDT switch handles up to 3 A at 250 VAC, while the LED ring operat...

SKU: AF-1440

A 16mm illuminated pushbutton with a built-in green LED and momentary action. The switch contacts connect only while the button is held down and return to their normally-open state when released — perfect for trigger inputs, action buttons, and interactive controls. The LED is wired independentl...

SKU: AF-1504

A clean, rounded 16mm panel-mount momentary pushbutton in green. This normally-open micro-switch connects the contacts only while pressed, making it a straightforward input for any project enclosure or control panel. Key Features Momentary Action – Normally open; contacts connect only while pr...

SKU: AF-5236

A rugged chrome-plated metal pushbutton with a built-in full-colour NeoPixel LED ring. Simply drill a 19 mm hole in any panel up to 0.45″ thick, fit the button, and seal it with the included rubber gasket for water resistance. The NeoPixel ring runs on a standard 5V NeoPixel signal line — no nee...

SKU: SF-COM-31074 · MPN: COM-31074

This green mushroom-head pushbutton gives you a dependable, easy-to-hit input for starting a machine, triggering a command, or making a highly visible “Go”, “Start”, or “Reset” control.It operates as a momentary switch, so the circuit remains closed only while the button is pressed. The 16mm thre...

SKU: AF-1476

A 16mm illuminated pushbutton with a built-in blue LED and latching on/off action. Press once to switch on, press again to switch off — ideal for power switches, mode selectors, and control panels. The LED is wired independently from the switch contacts, giving you full control over when the lig...

SKU: AF-6261 · MPN: ADA6261

This 60mm square button is large, inviting, and ready for all sorts of pressing and pushing. We've seen these on some games of skill in arcades. They're easy to mount on nearly any kind of enclosure. They're not waterproof or weatherproof, so they're best kept indoors.The body is black plastic, a...

SKU: SF-DEV-21326 · MPN: DEV-21326

This compact MicroMod processor board adds an STM32F405 to a compatible MicroMod Carrier Board, giving your project an ARM® Cortex®-M4 32-bit RISC core in a small, swappable M.2 module.The bevelled edge connector keys into the MicroMod M.2 socket and is secured with the screw supplied with MicroM...

SKU: SF-DEV-19957

The SparkFun AzureWave Thing Plus is a Feather form-factor development board equipped with the AW-CU488. The module features the Realtek RTL8721DM integrated single-chip low-power dual-band (2.4GHz and 5GHz) wireless LAN communication controller. It also consists of a dual processor core: Rea...

SKU: DF-FIT0115-B

A rugged, waterproof illuminated pushbutton designed for panel-mount applications. Built from stainless steel, this momentary switch features a blue LED ring that provides clear visual feedback, making it easy to identify switch status at a glance. The integrated LED operates on 5–12V, making it...

SKU: AF-1477

A 16mm illuminated pushbutton with a built-in blue LED and momentary action. The switch contacts connect only while the button is held down and return to their normally-open state when released — perfect for trigger inputs, action buttons, and interactive controls. The LED is wired independently...

SKU: AF-6117 · MPN: ADA6117

This RJ-50 (10P10C) panel mount adapter plug provides a quick, clean way to add a pass-through RJ-50 jack to any enclosure or project panel. Simply drill a 30mm hole, insert the adapter, and secure it with the included plastic nut and washer for a professional finish. The forgiving plastic lip c...