All Products

SKU: AF-1827

Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. This is the 'slim' version of the DIY USB-A Male connector. It's a little more elegant because instead of snapping two pieces together the connector press-fits into the overmolding for a mode...

SKU: AF-1826

Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. This is the 'slim' version of the DIY MicroB Male connector. It's a little more elegant because instead of snapping two pieces together the connector press-fits into the overmolding for a mod...

SKU: AF-1387

Build custom USB connections without slicing apart a cable and soldering those thin internal wires. This DIY USB shell gives you a proper Type A male plug connector with easy-to-solder tabs and a two-part snap-together plastic housing. Key Features Easy-to-Solder Tabs – Large solder points for...

SKU: AF-1388

Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. These DIY "USB shells" are available in USB A plug, micro B, mini B and USB A socket.Each shell comes with a two-part snap plastic shell and a proper connector with easy-to-solder tabs.

SKU: AF-1389

Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. These DIY "USB shells" are available in USB A plug, micro B, mini B and USB A socket.Each shell comes with a two-part snap plastic shell and a proper connector with easy-to-solder tabs.

SKU: AF-4897

A 40-pin FPC to right-angle 2×20 IDC male plug header adapter board. Converts a standard 40-pin 0.5mm pitch FPC/FFC cable connection into a male GPIO plug, allowing you to connect HATs and Bonnets at a distance from your Raspberry Pi via a slim, flexible cable. Insert the male plug into your HAT...

SKU: AF-4904

A 40-pin FPC to straight 2×20 IDC male plug header adapter board. Converts a standard 40-pin 0.5mm pitch FPC/FFC cable connection into a male GPIO plug, allowing you to connect HATs and Bonnets at a distance from your Raspberry Pi via a slim, flexible cable. Insert the male plug into your HAT or...

SKU: AF-4932

A pack of 10 edge-launch USB Type-C SMT plug connectors for custom PCB designs. Each connector mounts to the edge of a board via surface-mount pads and plugs directly into a USB-C port — ideal for creating compact, plug-in devices. Key Features Type – USB Type-C plug (male), edge-launch Mount...

SKU: AF-3628

This adapter converts a USB-A male plug into a 5-pin screw terminal block, making it easy to connect bare wires to a USB port without soldering. Just loosen the terminal screws, insert your stranded or solid-core wire, and tighten. All five pins are clearly labelled (VCC, D−, D+, GND, and Shield/...

SKU: SF-BOB-15100

Add a USB-C connector to your project without wrestling with tiny SMD pads. This breakout board routes the USB-C connector's key pins to a standard 0.1" pitch header, making it straightforward to integrate into breadboards and custom PCB designs. Breaks out VBUS, GND, CC1, CC2, D+, and D− — cove...

SKU: TB-MP3312

This 12W switchmode plug pack features manually selectable voltage output (3V, 5V, 6V, 7.5V, 9V, or 12V DC) at up to 1000 mA, plus a built-in USB-A output socket for charging or powering USB devices. It comes with 7 interchangeable DC plugs to suit a wide variety of barrel connector sizes. The s...

SKU: AF-4056

This panel mount cable will allow you to enclose a device that has a USB Micro B port, and also converts it to a modern USB C connector at the same time. Perfect for placing your project in a secure box! One end is a USB Micro B plug connector, and other is a USB C socket with special over-moldin...

SKU: AF-2910

This super slim, super tiny, and super cute Micro-B to USB on-the-go adapter is so slim, tiny, and cute that we'd pinch its cheeks if it was big enough to have cheeks.  At just ~15.5mm long, ~11.3mm wide, and ~2mm, this really is the tiniest little adapter we've probably ever seen.But d...

SKU: TB-PP0800

DB9 (9 pin) plug suitable for line mount with back shell. Specifications Plug or Socket Type D9 Pack Quantity 1pc Contacts / Pins 9pc ...

SKU: TB-PP0820

DB15 (15 pin) plug suitable for line mount with back shell. Specifications Plug or Socket Type D15 Pack Quantity 1pc Contacts / Pins 15pc ...

SKU: AF-4105

If you love DIY cable-rigging, then these USB adapters are right up your alley! Making custom USB cables has never been easier. Just grab one of our ribbon cables, then swap and switch any of our USB adapters on each end using the flex cable clips. There are options a-plenty! This version i...

SKU: SF-BOB-16998 · MPN: BOB-16998

Add a reversible USB-C connector to your project without hand-soldering the tiny SMD pads. This horizontal breakout makes it easier to bring USB-C power and data connections onto a prototype or custom build.The board breaks out the USB-C connector’s VBUS, GND, CC1, CC2, D+ and D- pins to 0.1" pit...

SKU: AF-3009

Short break-away male headers in a convenient pack of ten — ideal for low-profile connections where standard-height male headers would be too tall. These headers are designed to pair with short female headers for a slim, compact fit. Each header strip is 36 pins long with standard 0.1" (2.54mm) ...

SKU: AF-3310

A 5.5×2.1mm DC barrel connector plug for adding a standard power connector to the end of your own wires. The outer shell unscrews to reveal solder terminals and a crimp strain relief, making it easy to wire up custom power cables. This is the most common barrel jack size used with Arduino boards...

SKU: LB-LS5638

A 90-degree right-angle Micro USB male-to-female adapter that redirects your cable sideways, reducing strain on the connector and fitting neatly into tight spaces. The male end is right-angled while the female end is straight, providing a simple plug-in solution for awkward cable routing. Key Fe...