All Products

SKU: DF-DFR1179 · MPN: DFR1179

The ZL9NSQ is a high-performance 3D attitude sensor module that integrates a three-axis accelerometer, a three-axis gyroscope, and a three-axis magnetometer. Featuring a 32-bit ARM Cortex-M4F microprocessor, it utilizes the IMU Motion Engine algorithm along with a 2.4G wireless transceiver and pa...

SKU: PL-2739

The Pololu AltIMU-10 v5 is a compact inertial measurement unit (IMU) and altimeter that combines a gyroscope, accelerometer, magnetometer, and barometric pressure sensor on a single board. It provides ten independent measurements — pressure, 3-axis rotation, 3-axis acceleration, and 3-axis magnet...

SKU: DF-SER0046

A 9g micro servo with an extended 270° rotation range, metal gears, and built-in analog feedback (0–3.3V). The wider rotation range makes it suitable for applications requiring more travel than a standard 180° servo, while the analog feedback signal enables closed-loop position control via an MCU...

SKU: DF-SER0062

A high-torque brushless waterproof servo delivering up to 45 kg·cm of stall torque at 8.4V. The all-metal gear train and aluminium shell provide exceptional durability, while IP67-rated waterproofing — achieved through laminated circuit boards, waterproof gaskets, and breathable composite sealing...

SKU: SF-GPS-28139 · MPN: GPS-28139

The SparkPNT GNSS Flex Module delivers centimetre-level RTK positioning using the Quectel LG290P receiver with quad-band support (L1, L2, L5, E6/L6) and multi-constellation tracking across GPS, GLONASS, Galileo, BDS, QZSS, and NavIC. With a built-in NIC anti-jamming unit and 1,040 tracking channe...

SKU: SF-SEN-14544

The low current version of the SparkFun Current Sensor Breakout is a high accuracy board that utilizes the ACS723 for low to moderate AC and DC current sensing applications. The ACS723 sensor uses a Hall effect sensor to output a voltage relative to the current flowing through the IP+ and IP...

SKU: WS-25553

A 3 MP camera module built around the SmartSens SC3336 sensor, designed for use with LuckFox Pico series boards. The 1/2.8" CMOS sensor delivers high-sensitivity, high-SNR imaging with strong low-light performance, making it well suited for surveillance, computer vision, and night-time monitoring...

SKU: DF-SEN0371

The BMP388 Digital Pressure Sensor Module is a high-accuracy barometric pressure and temperature breakout based on the Bosch BMP388. It offers significantly improved performance over its predecessors (BMP180, BMP280) with lower power consumption, higher resolution, and faster sampling — making it...

SKU: DF-DFR0477

The Realtek Ameba RTL8195AM is an IoT microcontroller module that combines a 32-bit ARM Cortex-M3 MCU (166 MHz) with Wi-Fi 802.11 b/g/n and NFC (Near Field Communication) on a single chip. It supports Arduino and MicroPython programming, making it accessible for rapid IoT prototyping and developm...

SKU: SF-BOB-15439

The SparkFun PCA9306 Level Translator Breakout provides dual bidirectional voltage-level translation for I2C and SMBus lines. It lets you safely connect devices operating at different logic levels — for example, a 3.3V sensor to a 5V microcontroller — without a direction pin. Simply apply your re...

SKU: DF-ROB0004

The HCR (Home Care Robot) Mobile Robot Platform is a two-wheel-drive robot chassis with a three-level structure, designed for building indoor service and research robots. The kit includes two DC motors with integrated encoders, two rubber wheels, an omni-directional caster wheel, three collision ...

SKU: DF-DFR1025

A high-efficiency 60W DC-DC buck converter module that steps down 9–15V input to an adjustable 0.6–5.1V output at up to 18A. Ideal for powering WS2812 RGB LED strips, servos, and other devices requiring low voltage with high current from a 12V or 11.1V lithium battery source. Features 92% typica...

SKU: AF-5709

The Adafruit CAN Bus FeatherWing adds CAN bus networking to any Feather board. It uses the MCP2515 CAN controller and TJA1051/3 transceiver to send and receive messages in standard or extended format at up to 1 Mbps over a two-wire differential bus. Only an SPI port and two pins (chip-select and ...

SKU: SF-WRL-24806 · MPN: WRL-24806

The ESP32-C6-WROOM-1 is Espressif's first Wi-Fi 6 module, integrating 2.4 GHz Wi-Fi 6 (802.11ax), Bluetooth 5.3 (LE), and IEEE 802.15.4 (Thread/Zigbee) on a single chip. Built around a high-performance 32-bit RISC-V core clocked up to 160 MHz plus a low-power RISC-V core at 20 MHz, it offers stro...

SKU: DF-FIT0774

A compact coin-type vibration motor measuring just 10 × 2.7 mm — roughly the size of a fingernail. It delivers strong vibration with low noise and operates across a 1.5–4.2 V range, with vibration intensity increasing at higher voltages. The flat, disc-shaped form factor makes it easy to embed in...

SKU: DF-FIT0495-G

A compact metal DC geared motor with a 45:1 reduction gearbox, delivering up to 1.2 kg·cm of torque. The all-metal gears provide durability and stability for robotics and mechanical projects. Features a D-shaped 4 mm output shaft. Specifications Rated Voltage – 6V DC Operating Voltage – 2–7.5...

SKU: DF-DFR0849

A dual-output USB fast-charging buck module with wide 6–32V input range and adjustable 3–12V output. It supports multiple fast-charging protocols including Qualcomm QC 3.0, Huawei FCP/SCP, and Samsung AFC, making it compatible with 99% of smartphones on the market. Both USB channels operate indep...

SKU: AF-2214

A 12.000MHz quartz crystal in a standard HC49/US short-style package with two 20pF load capacitors included. The crystal has 30PPM tolerance and 50PPM stability, making it precise enough for USB timing, long-term timekeeping, and RF/PLL/VCO applications. The breadboard-friendly package works with...

SKU: DF-FIT0888

The Miniware MHP30 is a pocket-sized smart hot plate preheater designed for SMD preheating and desoldering. Standing just 5.2 cm tall with a 30 × 30 mm heating area, it condenses the functionality of a desktop heating station into a compact, portable form factor powered by USB-C PD. The separabl...

SKU: DF-TEL0190 · MPN: TEL0190

RainbowLink V2 is a pocket-sized USB Type-C serial debugging workstation that combines four independent communication channels with useful field power outputs. It replaces multiple USB dongles for RS485, RS232 and TTL UART work, making it well suited to field engineering, IoT development and indu...