All Products

SKU: AF-724

Screw terminal blocks are the clean, maintainable solution for PCB-to-wire connections — no solder, no loose ends, easy to swap out later. These 3.5mm pitch 2-pin blocks are a practical size: wide enough for a range of wire gauges, compact enough not to dominate your board, and designed to snap t...

SKU: SF-PRT-08084

Screw Terminals with 3.5mm pitch pins. Comes in 2 or 3 positions and have the really cool feature of slide-locking together to form any size you need (4, 5, up to 20 without problems). Rated up to 125V @ 6A. Terminal can accept 30 to 20AWG wire. 3.5mm/138mil pin pitch will not fit standard 0.1" p...

SKU: DF-FIT0181

This is a high quality 2-pin screw terminal. Very useful when you want to connect 24-18AWG wires to your circuits. SPECIFICATIONS Rated voltage: 300V Rated current: 10A Contact resistence: 20mΩ Insulation resistence: 5000Ω/1000V Voltage tolernce: AC2000V/1Min ...

SKU: SF-PRT-21329 · MPN: PRT-21329

This pluggable terminal block socket is made for secure, removable wire-to-board connections in power and I/O wiring. The 10-way layout uses a 3.5mm pitch, giving you a compact connector for multi-wire harnesses.Each position uses a rising clamp screw terminal to hold the wire firmly without dama...

SKU: AF-801

The Adafruit Prototyping Pi Plate Kit snaps onto your Raspberry Pi and provides a generous prototyping area with all GPIO, I2C, SPI, and power pins broken out to labelled 0.1" strips and 3.5 mm screw-terminal blocks. It's designed for the original Pi Model A/B but also works with any 40-pin Pi (A...

SKU: SF-PRT-21328 · MPN: PRT-21328

This 10-position right-angle terminal block header is made for secure, pluggable wire-to-board connections on a PCB. Solder it directly to your board and use it as the receptacle for a removable screw terminal block.It is well suited to I/O signals and power lines that may need to be disconnected...

SKU: SF-PRT-08235

Screw Terminals with 3.5mm pitch pins. Comes in 2 or 3 positions and have the really cool feature of slide-locking together to form any size you need (4, 5, up to 20 without problems). Rated up to 125V @ 6A. Terminal can accept 30 to 20AWG wire. 3.5mm/138mil pin pitch will not fit standard 0.1" p...

SKU: PR-PIM371

The automation:bit is a micro:bit expansion board for controlling and monitoring low-voltage systems up to 24 V. It features analogue and digital inputs, sinking outputs, and a relay — all accessible via 3.5 mm screw terminals. No soldering required. Program it using the block-based Microsoft Ma...

SKU: EC-MCS01110

The Screw Shield extends all pins of the Arduino out to 3.5mm pitch screw terminals. It also has a lot of the utility provided by Arduino Protoshield, including: a large prototyping space of both connected and unconnected 0.1" spaced through-holes, a couple 5V and GND busses, a reset button, and ...

SKU: SF-PRT-15519

This is a Screw Terminal with 3.5mm pitch pins. Comes in 2, 3, or 4 positions and have the really cool feature of slide-locking together to form any size you need (4, 5, up to 20 without problems). Rated up to 125V @ 6A. Terminal can accept 30 to 20AWG wire. 3.5mm/138mil pin pitch will not fit st...

SKU: PR-PIM213

The Pimoroni Automation HAT is a versatile home automation and monitoring controller for the Raspberry Pi. It provides relays, analogue inputs, buffered digital inputs, and powered outputs — all 24 V tolerant — with indicator LEDs on every channel for at-a-glance status monitoring. Connects to t...

SKU: LB-LS2575

A 100-piece prototyping kit with everything you need to take a breadboard project to a soldered prototype. Includes a selection of PCBs in four sizes, straight and right-angle headers, female headers, screw terminal blocks, and jumper caps — all organised in a plastic storage box. Key Features ...

SKU: SF-PRT-21505 · MPN: PRT-21505

This 12-position screw terminal block is a simple way to make secure wire connections on a PCB or prototyping board. Each position uses a screw clamp, making it handy for bringing external wiring into a circuit without soldering the wire directly to the board.The 3.5mm pitch is designed to line u...

SKU: AF-2914

A 3.5 mm (1/8") 4-pole TRRS audio plug with screw terminal connections — no soldering required. Use stranded or solid-core wire and a small screwdriver to create custom audio cables, breakouts, and test leads. TRRS stands for Tip, Ring, Ring, Sleeve, providing four contacts: three signal lines a...

SKU: LB-LS3938

This terminal block breakout module comes fully assembled and soldered, ready for use with Raspberry Pi boards.It is compatible with Raspberry Pi 1 Model B+, Pi 2 Model B, Pi 3 Model B, Pi 3 Model B+, Pi 4 Model B, Pi Zero, and Pi Zero W.The module features 2.54 mm (0.1″) pitch terminal blocks su...

SKU: AF-3648

The Adafruit PT1000 RTD Temperature Sensor Amplifier is a breakout board for the MAX31865 precision RTD-to-digital converter, configured for PT1000 platinum resistance temperature detectors. It reads 2-, 3-, or 4-wire PT1000 sensors over SPI, delivering laboratory-grade temperature accuracy and r...

SKU: LB-STEREO

A solder-type 3.5 mm (1/8") stereo TRS plug with a durable metal housing. Ideal for building or repairing custom audio cables, connecting to breakout boards, or adding a standard headphone-size connector to DIY projects. Key Features Metal Construction – Robust metal barrel for durability and ...

SKU: LB-LS7440

A 30cm breakout cable with a USB-C plug on one end and clearly labelled screw terminals on the other. Provides easy access to power and data lines for prototyping, enclosures, and custom installations without soldering. Key Features USB-C to Screw Terminal – Easy access to VBUS, GND, and data ...

SKU: AF-5095

A screw-terminal breakout module for the Raspberry Pi Pico, designed for industrial, robotics, and prototyping applications where secure, tool-free wiring is essential. Every GPIO pin is broken out to labelled terminal blocks, making it easy to connect sensors, displays, motors, and other periphe...

SKU: AF-1800

A solder-on 3.5 mm (1/8") stereo audio plug for building custom audio cables. Made from durable metal with a flexible spring strain relief, it provides a solid, professional-quality connection. Solder your wires to the three contact points and you have a custom cable ready to go. Key Features ...