All Products

SKU: WS-18233 · MPN: 18233

In short A satellite positioning board that plugs onto a Raspberry Pi and tells it where it is, to within about 2.5 metres. It tracks four satellite networks instead of just GPS, so it keeps working in places a basic GPS module gives up — under trees, between tall buildings, or in a moving vehicl...

SKU: DF-TEL0119

The USB/TTL Raspberry Pi GPS Tracker is a compact GPS location module built around the L80-39 chip. With 66 search channels and 22 simultaneous tracking channels, it delivers fast satellite acquisition and reliable positioning accuracy down to 2.5m. Featuring both USB and TTL interfaces, this mo...

SKU: AF-2324 · MPN: 2324

The Adafruit Ultimate GPS HAT adds high-quality GPS and GLONASS positioning to your Raspberry Pi. Built around a PA1616D module, it provides precise location data and a built-in real-time clock (RTC) with coin cell backup — perfect for outdoor projects, time synchronisation, and location-aware ap...

SKU: AF-4279 · MPN: 4279

The Adafruit Ultimate GPS with USB brings plug-and-play GPS and GLONASS positioning to any computer, laptop, or embedded Linux device via a built-in CP2104 USB-to-Serial converter. Simply connect a Micro USB cable and start receiving location data at 9600 baud — no microcontroller required. Buil...

SKU: DF-TEL0138

Based on a UBX-G7020-KT positioning chip, this USB GPS receiver is designed for low-power, high-sensitivity satellite positioning. It can receive 56-channel satellite signals and is built for faster positioning and stronger reception than traditional GPS receivers.The receiver includes a built-in...

SKU: SF-GPS-29890 · MPN: GPS-29890

Add precise position and orientation data to a Raspberry Pi with this GNSS Flex pHAT and LG580P module combination. It is built for advanced navigation projects that need centimetre-level RTK positioning plus real-time heading data, such as intelligent robots, precision agriculture systems and au...

SKU: AF-2353 · MPN: 2353

This 7.0" TFT display packs 800×480 pixels with an LED backlight and 24-bit colour capability via its 40-pin connector (8 red, 8 green, 8 blue parallel pins). It's ideal for projects requiring a large display area for graphics, menus, or data visualisation. This is a raw pixel-dot-clock display ...

SKU: AF-2354 · MPN: 2354

This 7.0" TFT display packs 800×480 pixels with an LED backlight and a 4-wire resistive touchscreen overlay. With 24-bit colour capability via its 40-pin connector (8 red, 8 green, 8 blue parallel pins), it's ideal for projects requiring a large, interactive display area. This is a raw pixel-dot...

SKU: SF-GPS-29491 · MPN: GPS-29491

Add dual-band GNSS positioning to a Raspberry Pi or similar single-board computer with this SparkPNT GNSS Flex pHAT and DAN-F10N module combination. It pairs a GNSS Flex pHAT carrier with a u-blox DAN-F10N GNSS Flex Module for metre-level L1/L5 positioning in a compact, swappable format.The pHAT ...

SKU: SF-GPS-29362 · MPN: GPS-29362

Build high-precision positioning into your GNSS Flex setup with this swappable ZED-X20P module. It uses the u-blox X20 engine, the successor to the F9 generation, for demanding navigation, control, robotics and vehicle applications.The module connects to a GNSS Flex pHAT carrier board via standar...

SKU: DF-TEL0161 · MPN: TEL0161

##Introduction The SIM7600G is an integrated wireless communication module. It features 4G CAT1 with an uplink speed of 5Mbps and a downlink speed of 10Mbps, and supports GNSS positioning (GPS, BD, GLONASS). The module is compatible with Raspberry Pi, Arduino, and LattePanda single-board computer...

SKU: WS-21707

A 4G/3G/2G communication HAT for Raspberry Pi featuring the SIM7600G-H module with LTE CAT4 speeds and global band coverage. Connect it to a Raspberry Pi, Jetson Nano, or PC via USB to enable high-speed cellular networking, cloud communication, phone calls, SMS, and GNSS positioning. The HAT use...

SKU: SF-GPS-21305 · MPN: GPS-21305

The SparkFun GPS-RTK Dead Reckoning pHAT brings high-precision GNSS positioning with automotive dead reckoning to the Raspberry Pi. Built around the u-blox ZED-F9R module, it fuses GNSS measurements with an integrated 3D IMU (accelerometer and gyroscope), wheel ticks, and a vehicle dynamics model...

SKU: SF-GPS-29061 · MPN: GPS-29061

Add modular GNSS positioning to a Raspberry Pi or similar single-board computer with this compact SparkPNT GNSS Flex receiver module. It is built around the u-blox DAN-F10N and is designed for reliable metre-level positioning, including challenging urban environments.The module fits the SparkPNT ...

SKU: DF-TEL0137

This GPS receiver brings much more accurate and faster positioning performance with stronger signal compared with traditional GPS receivers. It is compact, lightweight and portable. Integrated with built-in receiving antenna, this product adopts a high-precision positioning chip and industrial-...

SKU: DF-TEL0132

A compact multi-constellation GNSS positioning module based on the AT6558 chip with 32 tracking channels. It simultaneously receives signals from six satellite navigation systems: GPS, BeiDou, GLONASS, Galileo, QZSS, and SBAS (WAAS, EGNOS, GAGAN, MSAS) for accurate joint positioning. The module ...

SKU: DF-TEL0157

Global Navigation Satellite Systems (GNSS) provide critical timing and positioning functions for device operations. This Gravity: GNSS positioning module from DFRobot supports BeiDou, GPS, GLONASS and other multi-satellite systems. It is capable of quick delivery of position data like longitude, ...

SKU: WS-24370

The LC76G is a multi-GNSS positioning module that supports GPS, BeiDou (BDS), GLONASS, Galileo, and QZSS satellite systems. It allows multi-system combined or single-system independent positioning for fast, accurate location data. The module communicates via UART or I2C, making it compatible with...

SKU: SF-GPS-29469 · MPN: GPS-29469

This SparkPNT Flex board combines Quectel's LG290P quad-band RTK GNSS receiver with the Feyman (FMI) IM19 IMU, providing centimetre-level positioning with tilt compensation and anti-jamming performance for demanding navigation and surveying projects.It is part of the SparkPNT GNSS Flex system, de...

SKU: DF-TEL0190 · MPN: TEL0190

RainbowLink V2 is a pocket-sized USB Type-C serial debugging workstation that combines four independent communication channels with useful field power outputs. It replaces multiple USB dongles for RS485, RS232 and TTL UART work, making it well suited to field engineering, IoT development and indu...