All Products

SKU: AF-3055

Did you really think the Raspberry Pi would stop getting better? At this point, we sound like a broken record, extolling on the new Pi’s myriad improvements like we’re surprised that the folks at the Raspberry Pi Foundation are continuously making their flagship board better.  Still, w...

SKU: LB-BASIC-8G

The Raspberry Pi Basic Kit (exclusive to Little Bird and Pi Australia) includes everything you'll need to get up and running within minutes! Pi Australia is an official distributor for the Raspberry Pi Foundation within Australia and New Zealand. To ensure quality, we assemble our Raspberry Pi...

SKU: AF-4292

The Raspberry Pi 4 Model B is the newest Raspberry Pi computer made, and the Pi Foundation knows you can always make a good thing better! And what could make the Pi 4 better than the 3? How about a faster processor, USB 3.0 ports, and updated Gigabit Ethernet chip with PoE capability? Good guess ...

SKU: AF-4121

The Adafruit CharliePlex LED Matrix Bonnet features a 16×8 grid of cool white LEDs driven by the IS31FL3731 charlieplex driver over I2C. Simply plug it onto any Raspberry Pi with a 2×20 header for a bright, programmable 128-LED display — no soldering required. Each of the 128 LEDs supports indiv...

SKU: AF-4119

The Adafruit CharliePlex LED Matrix Bonnet features a 16×8 grid of yellow LEDs driven by the IS31FL3731 charlieplex driver over I2C. Simply plug it onto any Raspberry Pi with a 2×20 header for a bright, programmable 128-LED display — no soldering required. Each of the 128 LEDs supports individua...

SKU: AF-3467

The Adafruit CharliePlex LED Matrix Bonnet features a 16×8 grid of blue LEDs driven by the IS31FL3731 charlieplex driver over I2C. Simply plug it onto any Raspberry Pi with a 2×20 header for a bright, programmable 128-LED display — no soldering required. Each of the 128 LEDs supports individual ...

SKU: AF-4120

The Adafruit CharliePlex LED Matrix Bonnet features a 16×8 grid of green LEDs driven by the IS31FL3731 charlieplex driver over I2C. Simply plug it onto any Raspberry Pi with a 2×20 header for a bright, programmable 128-LED display — no soldering required. Each of the 128 LEDs supports individual...

SKU: AF-4122

The Adafruit CharliePlex LED Matrix Bonnet features a 16×8 grid of warm white LEDs driven by the IS31FL3731 charlieplex driver over I2C. Simply plug it onto any Raspberry Pi with a 2×20 header for a bright, programmable 128-LED display — no soldering required. Each of the 128 LEDs supports indiv...

SKU: AF-3775

The Raspberry Pi 3 Model B is the most popular Raspberry Pi computer made, and the Pi Foundation knows you can always make a good thing better! And what could make the Pi 3 better? How about a faster processor, 5 GHz WiFi, and updated Ethernet chip with PoE capability? Good guess - that's...

SKU: AF-1914

The Raspberry Pi Model B+ is an updated revision of the original Raspberry Pi Model B, featuring improved power supply design, more USB ports, expanded GPIO, and a more convenient microSD card slot — all in the same compact form factor. Powered by the same Broadcom SoC running at 700 MHz with 51...

SKU: AF-4295

The Raspberry Pi 4 Model B is the newest Raspberry Pi computer made, and the Pi Foundation knows you can always make a good thing better! And what could make the Pi 4 better than the 3? How about a faster processor, USB 3.0 ports, and updated Gigabit Ethernet chip with PoE capability? Good guess ...

SKU: PR-PIM085

All the electronic components you need to complete the hands-on projects in the Adventures in Minecraft book, including the bonus online projects. Build a Minecraft detonator, Crafty Crossing, the Minecraft Lift, and more using physical buttons and LEDs connected to your Raspberry Pi. Designed f...

SKU: AF-3062

Complete your Pi setup with our custom designed faceplate specifically designed to fit your 2.8" PiTFT and Adafruit Pi B+ / Pi 2 / Pi 3 case base! This Clear Case Base and Faceplate and Buttons Combo Pack is a simple way to enclose your 2.8" PiTFT and Pi safely and in style...

SKU: AF-2262

The Adafruit GPIO Reference Card makes it easy to identify and connect wires to the Raspberry Pi's GPIO header. This ultra-thin (0.8 mm) card slides directly onto the 2×13 GPIO header, labelling each pin by function — including I²C, UART, SPI, power, and general I/O — so you can wire up your proj...

SKU: LB-LS3938

This terminal block breakout module comes fully assembled and soldered, ready for use with Raspberry Pi boards.It is compatible with Raspberry Pi 1 Model B+, Pi 2 Model B, Pi 3 Model B, Pi 3 Model B+, Pi 4 Model B, Pi Zero, and Pi Zero W.The module features 2.54 mm (0.1″) pitch terminal blocks su...

SKU: AF-2082

The Timber Pibow is a layered wood enclosure from Pimoroni for the Raspberry Pi 1 Model B+. Crafted from high-quality wood with transparent acrylic top and base layers, it provides a natural, elegant look while protecting the board. An extension layer is included for stacking HATs or other access...

SKU: RP-SC0229-1

The official Raspberry Pi Foundation case for the Raspberry Pi 4 Model B. This solid ABS enclosure in the classic red and white colour scheme keeps your Pi secure while providing labelled cut-outs for all connectors: micro HDMI, USB-C power, Ethernet, USB ports, and the GPIO header. The snap-fit...

SKU: PL-2749

A 2×20-pin stackable female header designed for the Raspberry Pi GPIO. The extended pins allow HATs and add-on boards to be stacked while still providing access to all 40 GPIO pins for additional connections. This version includes three removable 0.1" spacers, giving it extra height to clear the...

SKU: LB-LR0387

This is the assembled version of the Pi T-Cobbler Plus.  It only works with the Raspberry Pi Model Zero, A+, B+, Pi 2, Pi 3 & Pi 4! (Any Pi with 2x20 connector)Each order comes with a 40 pin ribbon cable and assembled T-Cobbler Plus. You can plug the 40-pin GPIO cable between th...

SKU: SF-CAB-13028

This 40-pin (2×20) flat ribbon cable connects to the GPIO header on the Raspberry Pi, providing easy access to all GPIO, I2C, SPI, UART, and power pins. The 6-inch (15 cm) length keeps things tidy while giving you room to work with breadboards, breakout boards, and HATs. The cable uses standard ...