All Products

SKU: AF-3785

This isolated PoE splitter takes a unified Power over Ethernet signal from a single RJ-45 cable and separates it into data (Ethernet) and regulated 5V DC power via a Micro USB plug. It works with any 802.3af-capable router or switch, letting you power non-PoE devices over a standard Ethernet run ...

SKU: AF-435

Simplify your Internet of Things with a passive PoE injector cable. These are quite handy for projects that have Ethernet connectivity and also need a power cable. Of course, you can get a long Ethernet cable but then you have to figure out how to plug it in, making a mess of wires. There is an o...

SKU: SF-CAB-10759

Integrating Ethernet support into your project is a great way to relay data through a local area network and even bounce information out to the internet. Sometimes it’s hard to get power to your Ethernet devices. Wouldn’t it be convenient to use the same cable for power and data? Using these powe...

SKU: AF-4552

Power over Ethernet (PoE) splitters can make your project wiring a breeze - and best of all they work to connect any 802.3af-capable router to any Ethernet device, even if it doesn't natively support PoE! The splitter takes a unified PoE signal (data and power) from one RJ-45 cable, and then sepa...

SKU: SF-CAB-28269 · MPN: CAB-28269

This single-port 30W PoE+ injector lets you send power and data to a PoE-enabled Raspberry Pi over one Ethernet cable. It is intended for Raspberry Pi single board computers from the Raspberry Pi 3B+ onwards, excluding the Zero series.The injector supplies 55V at 550mA and supports 10/100/1000 Mb...

SKU: AF-3848

An isolated Power over Ethernet (PoE) module that extracts power from the Ethernet cable's centre taps and outputs a regulated 5 V at up to 1.8 A. The built-in isolation transformer ensures there is no direct electrical connection between the Ethernet side and the 5 V output — important for safet...

SKU: AF-3238

This IEEE 802.3af PoE splitter separates power and data from a single PoE Ethernet cable, providing regulated 12VDC at up to 1A on a standard 2.1 mm DC barrel jack alongside a standard Ethernet data connection. It lets you power non-PoE devices over Ethernet without running separate power cables....

SKU: DF-DFR0365

This high power PoE injector supports Midspan MODE-B PoE power protocol, and has 30W output.It supports up to 10/100Mbps communicating speed, and 100VAC~240VAC wide range input voltage makes it work stably with different voltage standards.With PoE output, you will no longer need any external powe...

SKU: AF-3239

This IEEE 802.3af PoE splitter separates power and data from a single PoE Ethernet cable, providing selectable regulated DC output (5V, 9V, or 12V) at up to 1A alongside a standard Ethernet data connection. A DIP switch on the unit lets you select your desired output voltage. The splitter accept...

SKU: WS-29320 · MPN: 29320

A dual-function HAT for Raspberry Pi 5 that adds M.2 NVMe SSD support via the Pi's PCIe interface and delivers Power over Ethernet (PoE) — combining fast storage and single-cable power/networking into one board. Supports M.2 NVMe SSDs in 2230, 2242, 2260, and 2280 sizes with Gen2 and Gen3 operat...

SKU: WS-18014

POE HAT FOR RASPBERRY PI Power Over Ethernet HAT For Raspberry Pi 3B+/4B, 802.3af-Compliant(Any Backward-Compatible Future Versions Will Be Supported As Well) OLED for real-time monitoring temperature, IP, and fan status The PoE HAT (B) is a 802.3af-compliant Power Over Ethernet accessory...

SKU: RP-SC1677 · MPN: SC1677

Many of our favourite Raspberry Pi applications, from garden webcams to industrial controllers, involve putting our products in out-of-the-way locations, where they act as a bridge between the network and the physical world. But the more out-of-the-way the location, the more challenging it is to ...

SKU: WS-31536 · MPN: 31536

Unleash the full potential of your Raspberry Pi 5 with the cutting-edge PCIe to M.2 Adapter with PoE Function (C). Designed with power users in mind, this highly adaptable expansion board offers seamless integration of high-speed NVMe protocol M.2 solid-state drives, ensuring accelerated reading ...

SKU: WS-27670 · MPN: 27670

The PoE HAT (G) is an IEEE 802.3af/at-compliant PoE (Power Over Ethernet) HAT for Raspberry Pi 5 / CM 5. By using with a PoE router or switch that supports the IEEE 802.3af/at network standard, it is possible to provide both network connection and power supply for your Raspberry Pi...

SKU: DF-DFR1248 · MPN: DFR1248

Designed specifically for the LattePanda IOTA single-board computer, this expansion board adds IEEE 802.3bt PoE++ power and Gigabit Ethernet data over a single Ethernet cable. It can deliver up to 51W, helping simplify installations where a separate power adaptor would be awkward or where periphe...

SKU: WS-26399

Introducing the POE HAT for Raspberry Pi 5: Simplify Connectivity and Power!High Power, Onboard Cooling Fan, With Metal Heatsink, Supports 802.3af/at network standard Power Over Ethernet (PoE) HAT designed for Raspberry Pi 5, compliant with IEEE 802.3af/at network standards, offering a seamles...

SKU: WS-28411 · MPN: 28411

Unleash the full potential of your Raspberry Pi 5 with the groundbreaking PCIe To M.2 Adapter With PoE Function! Specifically engineered for the latest computing solutions, this adapter is the perfect way to enhance your Raspberry Pi experience by adding the swift performance capabilities of an N...

SKU: WS-30901 · MPN: 30901

Power your Raspberry Pi 5 or Compute Module 5 over Ethernet with this PoE HAT (H). Deliver both power and network connectivity through a single Ethernet cable—perfect for remote installations, clean setups, and locations without easy access to power outlets. The HAT features an isolated switched-...

SKU: WS-30921 · MPN: 30921

Unlock the potential of your next tech project with the innovative Luckfox Nova Micro Development Board. This compact powerhouse is driven by the Rockchip RK3308B chipset, renowned for its performance in smart voice and multimedia applications. With a 64-bit quad-core ARM Cortex-A35 CPU clocking ...

SKU: SF-GPS-08288

Surface mount vertical 5-pin 1.0mm pitch connector for connecting to the EM-408 interface cable.