All Products

SKU: AF-4560 · MPN: 4560

The Adafruit Soft Flexible Wire NeoPixel Strand features 50 individually addressable RGB LEDs spaced approximately 100 mm (~4") apart on soft, plated wire. Unlike traditional flexible PCB strips that can crack when bent too far, these wire-based NeoPixels are ideal for costumes, wearables, and pr...

SKU: AF-5295 · MPN: 5295

Add a smooth slide control to any I2C project with the Adafruit NeoSlider — a 75 mm linear slide potentiometer with four RGB NeoPixel underlights, all communicating over I2C via the onboard seesaw microcontroller. No analog pins needed on your main board. Thanks to the STEMMA QT / Qwiic connecto...

SKU: AF-4537 · MPN: 4537

Drive massive NeoPixel installations without blocking your code. The NeoPXL8 FeatherWing for Feather M4 enables 8 concurrent DMA NeoPixel strands from a single Feather M4, with up to 1,750 RGB pixels per strand (14,000 total) — all running in the background via hardware DMA on the ATSAMD51's blaz...

SKU: AF-4979 · MPN: 4979

The NeoKey FeatherWing adds two mechanical key switch sockets with individually addressable NeoPixel backlighting to any Feather-format microcontroller. Each socket accepts Cherry MX or compatible switches (Kailh, Gateron, etc.) without soldering, using Kailh hot-swap sockets. A reverse-mount Ne...

SKU: AF-4870 · MPN: 4870

The Adafruit Neo Trinkey is a tiny USB-A development board featuring an ATSAMD21 microcontroller and four RGB NeoPixel LEDs. Just plug it into any USB-A port on a computer or laptop and you've got a programmable, colourful key that can act as a status indicator, macro keypad, MIDI controller, or ...

SKU: AF-4980 · MPN: 4980

The only thing better than a nice mechanical key is, perhaps, FOUR mechanical keys that also can glow any color of the rainbow - and that's what the Adafruit NeoKey 1x4 QT I2C Breakout will let you do! This longgg 3" x 0.8" PCB fits four Cherry MX or compatible switches a...

SKU: AF-5890 · MPN: ADA5890

This compact ItsyBitsy board packs an ESP32 PICO module into Adafruit’s small-format microcontroller layout, with dual-core processing, Wi-Fi, Bluetooth® Classic and BLE, 8 MB of Flash and 2 MB of PSRAM.This version swaps the PCB trace antenna for a w.FL external antenna connector, making it usef...

SKU: AF-764 · MPN: ADA764

Circuit Playground Bluefruit is a round, beginner-friendly electronics and programming board with Bluetooth® Low Energy built in. It builds on the Circuit Playground Express concept with a more powerful nRF52840 microcontroller, making it suitable for wireless projects, wearables, sensors, intera...

SKU: AF-6016 · MPN: ADA6016

This ultra-high-density NeoPixel strip packs 180 miniature RGB LEDs into a 1 metre length, with a milky silicone bead coating that helps create a smoother, more continuous colour gradient than classic pixel strips.The strip is 10mm wide and supplied on a reel with three 10cm colour-coded wires, a...

SKU: AF-2839 · MPN: ADA2839

Add individually addressable colour and white light to your project with this flexible NeoPixel RGBW LED strip. Each 5050-sized pixel contains red, green, blue and white LED elements, giving you colourful effects plus a dedicated white channel for brighter, cleaner white lighting.This is the 60 L...

SKU: AF-4863 · MPN: 4863

The Adafruit CYBERDECK HAT is a GPIO extender for the Raspberry Pi 400 that lets you plug full-size HAT displays and add-on boards into the back of the Pi 400 at a convenient angle. It duplicates every GPIO pin from input to output, so your HATs work without any pin limitations. In addition to t...

SKU: AF-2328 · MPN: 2328

Adafruit DotStar LED strips use 2-wire SPI instead of the single-wire protocol used by NeoPixels, allowing much faster data rates (up to 32 MHz) and a 20 KHz PWM refresh rate. This makes DotStars ideal for persistence-of-vision (POV) projects and smooth, flicker-free animations — especially at lo...

SKU: AF-1458 · MPN: 1458

Sense the world around you! The FLORA Sensor Pack includes many types of sensors for your wearable enjoyment. Sense motion, direction, color, light levels, touch, and connections with FLORA sensor breakouts and conductive materials, and a few NeoPixels for experimenting with displaying your se...

SKU: AF-4800 · MPN: 4800

The Adafruit MagTag is a WiFi-connected E-Ink display board powered by the ESP32-S2. Its 2.9" grayscale display retains its image even when power is removed, making it perfect for low-power IoT dashboards, status boards, and information displays that only need to update periodically. Designed fo...

SKU: AF-3587 · MPN: 3587

These incredibly small surface-mount LEDs are an easy way to add a lot of very tiny (but bright!) colorful dots to your project. They're mini versions of our digital DotStart strips and matrices with full chainable 2-wire control. They are just mind-bogglingly small. They are a mere 2mm x...

SKU: AF-3500 · MPN: 3500

The Adafruit Trinket M0 is a tiny but powerful microcontroller board built around the ATSAMD21E18 32-bit Cortex M0+ processor. It shares the same compact form factor and pinout as the original Trinket, but with a massive upgrade in processing power, memory, and connectivity — including native USB...

SKU: AF-2769 · MPN: 2769

The Circuit Playground Express Educator's Pack is a comprehensive classroom kit built around Adafruit's versatile Circuit Playground Express board. It includes everything educators need to teach electronics, coding, and wearable technology — from conductive thread and servos to battery packs and ...

SKU: AF-3501 · MPN: 3501

The Adafruit GEMMA M0 is a tiny, coin-sized microcontroller board designed for wearable electronics and small projects. Despite its quarter-sized footprint, it packs serious power with an ATSAMD21E18 32-bit Cortex M0+ processor, 256 KB of Flash, and 32 KB of RAM — a massive upgrade over the origi...

SKU: AF-3517 · MPN: 3517

Everything you need to get started with the Circuit Playground Express — a feature-packed, all-in-one development board that works with Microsoft MakeCode (block-based or JavaScript), CircuitPython, code.org CS Discoveries, and Arduino IDE. Program the same board in multiple ways as your skills g...

SKU: AF-3333 · MPN: 3333

The Circuit Playground Express is an all-in-one development board packed with sensors, LEDs, and a speaker — all on a round, beginner-friendly PCB with alligator-clip pads. No soldering required. It supports four programming environments: Microsoft MakeCode (block/JavaScript), CircuitPython, Ardu...