All Products

SKU: SF-DEV-18158 · MPN: DEV-18158

This Arduino-compatible development board keeps the familiar Uno-style layout while adding a few genuinely handy upgrades for modern projects. Built around the ATmega328P, it works with the Arduino IDE and fits the Uno R3 footprint, so it is a straightforward choice if you want broad compatibilit...

SKU: AF-1932

A labelled breakout board for 40-pin dot-clock TFT displays with an integrated LED backlight driver. Breaks out all 40 FPC pins to breadboard-friendly through-hole pads and includes a FAN5333-based boost converter for driving backlight LED strings up to 24V. The backlight driver defaults to 25mA...

SKU: AF-1912

A four-digit 0.54-inch blue alphanumeric LED display with an I2C backpack. Each digit has 14 segments, allowing it to display letters, numbers, and basic symbols. The bright blue LEDs on a black surface are readable from up to 7 metres (23 feet) away. The I2C backpack simplifies wiring to just t...

SKU: AF-5664

Need to use multiple I2C devices that share the same address? The PCA9546 4-Channel STEMMA QT / Qwiic I2C Multiplexer lets you connect up to four same-address I2C devices with completely solderless wiring. Five JST SH connectors (1 input + 4 outputs) make it plug-and-play with any STEMMA QT or Qw...

SKU: AF-5626

Need to use multiple I2C devices that share the same address? The PCA9548 8-Channel STEMMA QT / Qwiic I2C Multiplexer lets you connect up to eight same-address I2C devices with completely solderless wiring. Nine JST SH connectors (1 input + 8 outputs in two rows of four) make it plug-and-play wit...

SKU: AF-872

The Adafruit Mini 0.7" 8×8 LED Matrix with I2C Backpack makes it easy to add a bright yellow-green dot-matrix display to any project. The I2C backpack handles all the multiplexing, so you only need two data pins (SDA and SCL) plus power to control all 64 LEDs — no complex wiring or external drive...

SKU: AF-2044

The 16×8 1.2" LED Matrix + Backpack combines two ultra-bright square white 8×8 LED matrices on a single, compact driver board. The square pixel design creates a seamless, uniform look — perfect for scrolling text, small animations, or status displays in your projects. Powered by the HT16K33 driv...

SKU: AF-2042

The 16×8 1.2" LED Matrix + Backpack combines two ultra-bright square pure green 8×8 LED matrices on a single, compact driver board. The square pixel design creates a seamless, uniform look — perfect for scrolling text, small animations, or status displays in your projects. Powered by the HT16K33...

SKU: AF-2040

The 16×8 1.2" LED Matrix + Backpack combines two ultra-bright square blue 8×8 LED matrices on a single, compact driver board. The square pixel design creates a seamless, uniform look — perfect for scrolling text, small animations, or status displays in your projects. Powered by the HT16K33 drive...

SKU: AF-1633

The Adafruit Mini 0.7" 8×8 LED Matrix with I2C Backpack makes it easy to add a bright pure green dot-matrix display to any project. The I2C backpack handles all the multiplexing, so you only need two data pins (SDA and SCL) plus power to control all 64 LEDs — no complex wiring or external driver ...

SKU: AF-4648

The Adafruit PCF8591 Quad 8-bit ADC + 8-bit DAC combines four analogue input channels and one analogue output channel in a single I2C breakout. Measure voltages from potentiometers, sensors, or other analogue sources — and generate analogue output signals — all over a simple two-wire connection. ...

SKU: AF-5740

This STEMMA QT adapter makes the ANO rotary navigation encoder easy to use over I2C — no GPIO-heavy wiring needed. An on-board microcontroller running Adafruit's seesaw firmware tracks all rotary pulses and button presses, saving incremental values for querying at any time over I2C. Just plug in ...

SKU: AF-2035

A 16×8 LED matrix backpack kit featuring two ultra-bright 1.2" green 8×8 round LED matrices on a single I2C-controlled driver board. The HT16K33 chip handles all the multiplexing, so you only need two I2C pins (SDA and SCL) to control 128 LEDs — no complex wiring required. The backpack features ...

SKU: AF-2039

A 16×8 LED matrix backpack kit featuring two ultra-bright 1.2" blue 8×8 round LED matrices on a single I2C-controlled driver board. The HT16K33 chip handles all the multiplexing, so you only need two I2C pins (SDA and SCL) to control 128 LEDs — no complex wiring required. The backpack features c...

SKU: AF-2037

A 16×8 LED matrix backpack kit featuring two ultra-bright 1.2" red 8×8 round LED matrices on a single I2C-controlled driver board. The HT16K33 chip handles all the multiplexing, so you only need two I2C pins (SDA and SCL) to control 128 LEDs — no complex wiring required. The backpack features co...

SKU: AF-2038

A 16×8 LED matrix backpack kit featuring two ultra-bright 1.2" white 8×8 round LED matrices on a single I2C-controlled driver board. The HT16K33 chip handles all the multiplexing, so you only need two I2C pins (SDA and SCL) to control 128 LEDs — no complex wiring required. The backpack features ...

SKU: AF-326

This 0.96" monochrome OLED display packs 128×64 individually controllable white pixels into a compact, highly readable screen. Because OLED pixels produce their own light, no backlight is needed — resulting in excellent contrast, low power consumption, and crisp visuals even at this small size. ...

SKU: AF-5295

Add a smooth slide control to any I2C project with the Adafruit NeoSlider — a 75 mm linear slide potentiometer with four RGB NeoPixel underlights, all communicating over I2C via the onboard seesaw microcontroller. No analog pins needed on your main board. Thanks to the STEMMA QT / Qwiic connecto...

SKU: AF-5599

What's better than a single LED? Lots of LEDs! A fun way to make a small display is to use an 8x8 matrix or a 4-digit 7-segment display. Matrices like these are 'multiplexed' - so to control all the seven-segment LEDs you need 14 pins. That's a lot of pins, and there are driver chips like the MAX...

SKU: AF-5646

Add a dazzling 5×5 grid of 25 addressable RGB NeoPixels to any QT Py or Xiao board with this compact BFF (Best Friend Forever) add-on. The tiny SK6805 LEDs (1.5 × 1.5 mm each) pack vivid colour into a minimal footprint, powered directly from the QT Py's USB Type-C connection. The PCB is designed...