All Products

SKU: DF-DRI0035

INTRODUCTION This is a stepper motor driver introduced by DFRobot for those projects require powerful stepper motors, such as a pair of automatic curtains, an XY Plotter. This shield allows Arduino drive stepper motors (up to 2A per motor coil, 40V max). This stepper mo...

SKU: DF-DRI0039

INTRODUCTION The latest quad motor driver shield for Arduino, compatible with 5V/3.3V Arduino controller, can control up to four DC motors with 8 pins at the same time. The shield supports PWM speed control and polarity control. The driver shield includes two TB6612FNG ...

SKU: AF-1750 · MPN: 1750

The Synthetos gShield (formerly grblShield) V5 is a 3-axis CNC stepper motor driver shield for Arduino. Designed as a complete hardware companion for the grbl CNC motion control firmware, it turns an Arduino Uno into a capable CNC controller for mills, routers, laser cutters, and other motion-con...

SKU: AF-324 · MPN: 324

A stepper motor to satisfy all your robotics needs! This 4-wire bipolar stepper has 1.8° per step for smooth motion and a nice holding torque. The motor was specified to have a max current of 350mA so that it could be driven easily with an Adafruit motor shield for Arduino (or other motor driv...

SKU: AF-2442 · MPN: 2442

Need to make a tiny robot? This little micro servo rotates 360 degrees fully forward or backwards, instead of moving to a single position. You can use any servo code, hardware or library to control these servos. Good for making simple moving robots. Comes with five horns and attachment screw...

SKU: AF-1143 · MPN: 1143

Add more power to your robot with this metal-geared MG90S servo. The tiny little servo can rotate approximately 90 degrees (45 in each direction), and works just like the standard kinds you're used to but smaller. You can use any servo code, hardware or library to control these servos. Good for b...

SKU: IT-IM120417005

MotoMama is an Arduino shield built around the L298N H-bridge driver chip for small motor and robot projects. It can drive two DC motors or one four-wire, two-phase stepper motor.Motor power can be supplied through the onboard power terminal, which can also power the Arduino board. Alternatively,...

SKU: DF-ROB0049

The DFRobot MiniQ 2WD robotic platform is a compact, round chassis designed for students and hobbyists. At just 122 mm in diameter, it's ideal for indoor applications including maze competitions, educational courses, and rapid prototyping of robot designs. The platform features high-quality N20 ...

SKU: DF-DRI0001

The DFRobot 2×1A DC Motor Shield uses the L293 motor driver chip to control two 7–12 V DC motors at up to 1 A per channel. It stacks directly onto Arduino Uno and Arduino Mega boards, using pins 4, 5, 6, and 7 for motor control with PWM speed support. Key Features Dual Motor Drive – Control tw...

SKU: DF-DFR0406

INTRODUCTION The Arduino Motor Shield is based on L298 (a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and stepping motors). It helps you drive two DC motors with Arduino board as well as control the speed and direction of the ...

SKU: DF-DRI0002

A dual H-bridge DC motor controller based on the L298N driver chip, capable of driving two bi-directional DC motors at up to 2 A per channel. The module accepts a wide motor supply voltage of 4.8–46V and includes high-speed protection diodes and an enlarged heatsink for improved thermal performan...

SKU: DF-DFR0305

The Romeo BLE is an all-in-one Arduino-compatible robot control board from DFRobot with integrated Bluetooth 4.0. It combines an ATmega328P microcontroller, a dual-channel DC motor driver (2 A max), and a TI CC2540 BLE chip in a single board — letting you build and wirelessly control robots witho...

SKU: DF-DFR0225

RoMeo V2 [R3] is an All-in-One Arduino based robot board, it is especially designed for robotics applications, and extended devices. Romeo benefits from the Arduino open source platform, it is supported by thousands of open source projects, and can easily be expanded with Arduino Shields. The ...

SKU: AF-2307 · MPN: 2307

This high-powered micro servo packs nearly double the stall torque of standard micro servos into a compact metal-geared package. With approximately 180° of rotation, it works with any standard servo library, driver, or controller — including the Arduino Servo library, motor shields, and 16-channe...

SKU: KS-KS0605

Build and program a tracked mini robot with Keyestudio’s DIY Mini Tank V2.0 kit. Its processor can be programmed in the Arduino IDE, while plug-in shields connect its pins to sensors and actuators.The tank can avoid obstacles, follow light, respond to an IR remote or Bluetooth control, and displa...

SKU: DF-DRI0009

The DFRobot 2×2A DC Motor Shield uses the L298P dual full-bridge driver chip to control two DC motors at up to 2 A per channel. It stacks directly onto Arduino Uno and Arduino Mega boards, using PWM pins 5 and 6 for speed control and digital pins 4 and 7 for enable/disable. The shield can be pow...

SKU: EC-MCS02930M

This Adruino compatible motor Driver shield is a full-featured products that it can be used to drive 4 DC motor or two 4-wire stepper and two 5v servo. It drive the DC motor and stepper with the L293D,and it drive the servo with arduino pin9 and pin10. Features Be able to drive 4 DC motor and...

SKU: KS-KS0428

The Keyestudio Mini Tank Robot V2.0 is a tracked robotics platform for learning Arduino programming, sensor integration, and smart robot construction. It supports obstacle avoidance, line following, IR remote control, Bluetooth app control, ultrasonic following, and facial emoticon display — all ...

SKU: DF-DFR0351

INTRODUCTION Romeo BLE mini is a small Arduino compatible robot control board with motor driver and bluetooth 4.0. It benefits from the Arduino open source platform, which includes thousands of open source codes. Its integrated 2 way DC motor driver allows the projec...

SKU: DF-DFR0502

Gravity IO Expansion Shield with Motor Driver is a new product designed for Arduino Boards. It combines IO Expansion Shield and DC Motor Driver Shield, equipped with Gravity sensor interface and TB6612FNG dual motor driver. It also has XBee socket, I2C interface and UART po...