All Products

SKU: AF-801

The Adafruit Prototyping Pi Plate Kit snaps onto your Raspberry Pi and provides a generous prototyping area with all GPIO, I2C, SPI, and power pins broken out to labelled 0.1" strips and 3.5 mm screw-terminal blocks. It's designed for the original Pi Model A/B but also works with any 40-pin Pi (A...

SKU: AF-5213

Soft silicone dust covers designed to fit Mini HDMI ports. They slip into the socket to keep dust and debris out when the port is not in use, helping to maintain reliable connections over time. Key Features Mini HDMI Fit – Sized specifically for Mini HDMI sockets Soft Silicone – Easy to inser...

SKU: AF-2359

The Adafruit Raspberry Pi A+ Case is a slim, durable polycarbonate enclosure designed specifically for the Raspberry Pi Model A+. With a smoke-tinted base and clear top, it offers a clean, professional look while keeping your Pi protected and accessible. Designed by Mike Doell, the case features...

SKU: AF-2363

This clear polycarbonate base is designed for the Raspberry Pi Model A+. It's part of a modular snap-on case system — pair it with a separately available lid in your choice of colour to create a custom combination. Designed by Mike Doell, the case base is made from ultra-durable, high-gloss poly...

SKU: AF-1754

The Adafruit Pi T-Cobbler breaks out all the power, GPIO, I2C and SPI pins from the Raspberry Pi's 26-pin header onto a solderless breadboard in a T-shaped layout. The wider T-shape makes the pin labels easier to read compared to the compact Cobbler. Comes fully assembled with a 26-pin ribbon cab...

SKU: AF-2883

The Adafruit Pi Protector for Raspberry Pi Zero is a minimal, crystal-clear acrylic protector that keeps your pocket-sized Pi Zero safe without adding bulk. Just two acrylic pieces secured with four screws — sleek, lightweight, and perfect for carrying in your pocket. All edge connectors remain ...

SKU: AF-2371

This blue polycarbonate base is part of a mix-and-match case system for the Raspberry Pi Model A+. Pair it with any compatible snap-on lid to create your preferred colour combination — with seven base and seven lid colours available, there are 49 unique combinations to choose from. Designed by M...

SKU: AF-2258

The Adafruit Raspberry Pi B+ / Pi 2 / Pi 3 Case is a durable polycarbonate enclosure with a smoke-tinted base and clear top. Designed by Mike Doell, it offers a clean, professional look while keeping your Pi protected and fully accessible. The case features slim openings for all cables, a bevell...

SKU: AF-2808

Complete your Pi setup with our custom designed faceplate specifically designed to fit your 2.4" PiTFT HAT and Adafruit Pi A+  case base! This Faceplate and Buttons Pack is a simple way to enclose your 2.4" PiTFT and Pi safely and in style. The faceplate replaces the normal 'top...

SKU: AF-2280

The Adafruit Pi Box Plus is a crystal-clear acrylic enclosure designed specifically for the Raspberry Pi Model A+. Six laser-cut pieces slide together and secure with four screws for a sturdy, professional-looking build. A hinged top provides easy access to GPIO and onboard headers, while built-i...

SKU: AF-3386

The Adafruit PiRTC is a battery-backed real-time clock that plugs directly onto your Raspberry Pi's GPIO header, letting your Pi keep accurate time even when powered off. Built around the PCF8523 RTC with native Linux kernel support, it's ideal for data logging, time-stamping, alarms, and any pro...

SKU: AF-2711

With the Pi-EzConnect you can connect all sorts of electronics to a single Raspberry Pi  with no soldering or breadboarding! This HAT has screw-terminals for each pin on the Pi Header Key features: Solderless or soldered connections for all GPIO’s on a Raspberry Pi Mini proto area for...

SKU: AF-3211

The Adafruit RGB Matrix Bonnet makes it easy to drive HUB75-type RGB LED matrices directly from your Raspberry Pi. Simply plug the bonnet onto any Pi with a 40-pin GPIO header, connect your matrix via the IDC cable, attach a 5 V power supply, and run the provided Python code to create colourful s...

SKU: AF-3416

The Adafruit 16-Channel PWM/Servo Bonnet adds precision servo and PWM control to your Raspberry Pi. Using the PCA9685 I2C PWM controller, it drives up to 16 servos or PWM outputs simultaneously with 12-bit resolution — completely free-running with no Pi processing overhead. Up to 62 bonnets can ...

SKU: AF-3253

The Adafruit Raspberry Pi Camera Board Case is a compact two-piece polycarbonate enclosure that protects your Pi Camera while providing a 1/4" tripod mount on the back. Designed by Mike Doell, it snaps together without screws and features a sleek black base with a clear top. The case includes a ...

SKU: AF-4282

The Adafruit PiRTC Precise DS3231 is a high-accuracy, battery-backed real-time clock that plugs directly onto your Raspberry Pi's GPIO header. Built around a genuine Maxim DS3231 with an integrated temperature-compensated crystal oscillator (TCXO), it delivers exceptional timekeeping accuracy — f...

SKU: AF-2029

The Raspberry Pi B+/Pi 2/ Pi 3 has landed on the Maker World like a 40-GPIO pinned, quad-USB ported, credit card sized bomb of DIY joy. And while you can use most of our great Model B accessories by hooking up our downgrade cable, its probably a good time to upgrade your set up and accessorize...

SKU: AF-2250

An orange polycarbonate case base for the Raspberry Pi Model B+, Pi 2, Pi 3 Model B, and Pi 3 Model B+. The snap-together design lets you mix and match coloured lids and bases for custom combinations. This listing is for the base only — lids are available separately. Made from durable, glossy po...

SKU: AF-2345

The Adafruit RGB Matrix HAT + RTC makes it easy to drive HUB75-type RGB LED matrices from your Raspberry Pi. This HAT plugs onto any Pi with a 40-pin GPIO header and includes a DS1307 real-time clock, so your Pi can keep accurate time even after reboots or power loss — perfect for clock and time-...

SKU: AF-2340

The Adafruit Capacitive Touch HAT adds 12 capacitive touch sensors to your Raspberry Pi using the MPR121 touch controller over I2C. Each sensor has a figure-8 hole designed for alligator clip connections — attach clips to the HAT and the other end to anything conductive (metal, fruit, vegetables,...