All Products

SKU: AF-2029

The Raspberry Pi B+/Pi 2/ Pi 3 has landed on the Maker World like a 40-GPIO pinned, quad-USB ported, credit card sized bomb of DIY joy. And while you can use most of our great Model B accessories by hooking up our downgrade cable, its probably a good time to upgrade your set up and accessorize...

SKU: AF-1754

The Adafruit Pi T-Cobbler breaks out all the power, GPIO, I2C and SPI pins from the Raspberry Pi's 26-pin header onto a solderless breadboard in a T-shaped layout. The wider T-shape makes the pin labels easier to read compared to the compact Cobbler. Comes fully assembled with a 26-pin ribbon cab...

SKU: AF-2028

This is the assembled version of the Pi T-Cobbler Plus.  It only works with the Raspberry Pi Model Zero, A+, B+, Pi 2,Pi 3! (Any Pi with 2x20 connector)The Raspberry Pi has landed on the Maker World like a 40-GPIO pinned, quad-USB ported, credit card sized bomb of DIY joy. And while you ...

SKU: AF-4353

The Adafruit Perma-Proto 40-Pin Raspberry Pi Half-Size PCB Kit combines a compact half-sized prototyping board with a built-in Pi Cobbler breakout. Solder in the included 2×20 box header, connect a 40-pin GPIO cable, and you get labelled pin breakouts alongside 30 rows of breadboard-style prototy...

SKU: LB-LR0387

This is the assembled version of the Pi T-Cobbler Plus.  It only works with the Raspberry Pi Model Zero, A+, B+, Pi 2, Pi 3 & Pi 4! (Any Pi with 2x20 connector)Each order comes with a 40 pin ribbon cable and assembled T-Cobbler Plus. You can plug the 40-pin GPIO cable between th...

SKU: AF-4354

The Adafruit Perma-Proto 40-Pin Raspberry Pi Breadboard PCB Kit combines a full-sized prototyping board with a built-in Pi Cobbler breakout. Solder in the included 2×20 box header, connect a 40-pin GPIO cable, and you get labelled pin breakouts alongside 60 rows of breadboard-style prototyping sp...

SKU: AF-1148

The Adafruit Half-size Perma-Proto Raspberry Pi Breadboard PCB Kit combines a prototyping board with a built-in Pi Cobbler breakout. Solder the included 2×13 box header onto the board, connect a 26-pin GPIO ribbon cable (not included), and you get labelled GPIO breakouts alongside a generous half...

SKU: AF-2101

The "poor woman's" Raspberry Pi cobbler! This combo of 2x13 pin (0.1 spaced) header and socket is for our popular GPIO Ribbon Cable for Raspberry Pi Model A and B.  It comes in two parts, a 'pin-through' socket and a male header. The socket straddles the center of a breadboard o...

SKU: AF-801

The Adafruit Prototyping Pi Plate Kit snaps onto your Raspberry Pi and provides a generous prototyping area with all GPIO, I2C, SPI, and power pins broken out to labelled 0.1" strips and 3.5 mm screw-terminal blocks. It's designed for the original Pi Model A/B but also works with any 40-pin Pi (A...

SKU: AF-4687

The Adafruit 2.13" Monochrome E-Ink Bonnet brings crisp, paper-like displays to your Raspberry Pi with no soldering required. Simply plug this pre-assembled bonnet onto any Pi with a 2×20 header and start displaying high-contrast black-and-white graphics that remain visible even with power discon...

SKU: AF-2270

The "poor woman's" Raspberry Pi A+ / B+ / Pi 2 cobbler! This combo of 2x20 pin (0.1 spaced) header and socket is for our popular GPIO Ribbon Cable for Raspberry Pi Model A+/B+/Pi 2 (40 pins).  It comes in two parts, a 'pin-through' socket and a male header. The socket straddles the c...

SKU: AF-4706

Gotta say - this Pi 4 is fly.  All the cool kids are going to have it - but all the coolest kids are also going to have a big pack of super cool accessories.We've hand-selected these accessories as the perfect accompaniment to your new Raspberry Pi 4 - Model B.  It's everything you need...

SKU: AF-4718

The Adafruit SPI Non-Volatile FRAM Breakout provides 2 Mbit (256 KBytes) of ferroelectric RAM (FRAM) storage over SPI. FRAM combines the non-volatile retention of flash with the instant read/write speed of SRAM — no page writes, no block erasing, and each byte can be written 10 trillion times wit...

SKU: AF-2327

The Adafruit 16-Channel PWM/Servo HAT adds precision servo and PWM control to your Raspberry Pi. Using the PCA9685 I2C PWM controller, it drives up to 16 servos or PWM outputs simultaneously with 12-bit resolution — completely free-running with no Pi processing overhead. Up to 62 HATs can be sta...

SKU: AF-4197

Add a crisp, paper-like display to your microcontroller project with the Adafruit 2.13" Monochrome eInk Breakout. This 250×122 pixel black-and-white eInk panel delivers excellent daylight readability and retains its image even with power completely disconnected — just like printed paper. An onbo...

SKU: PR-PIM085

All the electronic components you need to complete the hands-on projects in the Adventures in Minecraft book, including the bonus online projects. Build a Minecraft detonator, Crafty Crossing, the Minecraft Lift, and more using physical buttons and LEDs connected to your Raspberry Pi. Designed f...

SKU: LB-LS3938

This terminal block breakout module comes fully assembled and soldered, ready for use with Raspberry Pi boards.It is compatible with Raspberry Pi 1 Model B+, Pi 2 Model B, Pi 3 Model B, Pi 3 Model B+, Pi 4 Model B, Pi Zero, and Pi Zero W.The module features 2.54 mm (0.1″) pitch terminal blocks su...

SKU: AF-3114

Have you always wanted to binge-watch Battlestar Galactica on a single-board computer? We have! And that's why we put together this Raspberry Pi Media Center kit for Raspberry Pi Model 3's! Based around the OSMC media center, this kit includes everything you need to get going on building ...

SKU: AF-2250

An orange polycarbonate case base for the Raspberry Pi Model B+, Pi 2, Pi 3 Model B, and Pi 3 Model B+. The snap-together design lets you mix and match coloured lids and bases for custom combinations. This listing is for the base only — lids are available separately. Made from durable, glossy po...

SKU: AF-5221

This breakout PCB converts the ANO rotary navigation encoder's non-standard pinout into a straightforward, breadboard-friendly header strip. The ANO encoder combines a rotary encoder with directional and centre-push buttons — similar to classic scroll wheel interfaces — and this PCB makes it easy...