All Products
Showing 1-10 of 10 products
Stepper Motor: Bipolar, 200 Steps/Rev, 42x38mm, 2.8V, 1.7 A/Phase
A NEMA 17 hybrid bipolar stepper motor with a 1.8° step angle (200 steps per revolution). Each phase draws 1.7 A at 2.8 V, delivering a holding torque of 3.7 kg·cm. Four colour-coded wires with bare leads connect to two coils: black/green for one coil, red/blue for the other. Best driven with a ...
Hybrid Stepper Motor for 3D Printer (3.5kg)
A NEMA 17 hybrid stepper motor with 3.5 kg·cm holding torque, designed for 3D printers and CNC machines. This 2-phase motor has a 1.8° step angle and a 5 mm diameter drive shaft. Includes a 50 cm cable with an XH 2.54 connector, compatible with Ultimaker and similar control boards. Key Features ...
Stepper Motor - 68 oz.in (400 steps/rev)
This NEMA 17 bipolar stepper motor delivers 68 oz·in (48 N·cm) of holding torque with a fine 0.9° step angle, providing 400 steps per revolution for high-precision positioning. Its 5mm D-shaft and standard NEMA 17 mounting make it compatible with a wide range of CNC, 3D printing, and robotics app...
Stepper Motor - 125 oz.in (200 steps/rev, 600mm Wire)
This NEMA 23 bipolar stepper motor delivers 125 oz·in of holding torque with 200 steps per revolution (1.8° step angle). Equipped with extra-long 600 mm AWG22 wires, it's designed for CNC applications where longer cable runs are needed. Stepper motors provide precise position control without the...
PD Stepper NEMA 17 USB-C PD Driver and Controller
·
Stepper motor builds often need a microcontroller, a separate driver, a 12V or 24V supply and plenty of wiring. This compact controller from Things by Josh brings that stack together in one unit designed to mount directly to the back of a standard NEMA 17 stepper motor.Power comes in via USB-C Po...
Stepper Motor with Cable
This is a simple, but very powerful stepper motor with a 4-wire cable attached. This is a Bipolar Motor. Features: Step Angle (degrees) :1.8 2 Phase Rated Voltage : 12V Rated Current : 0.33A Holding Torque : 2.3kg*cm 5mm Diameter Drive Shaft Winding resistance: 32.6 Ω Winding inductance: 48 ...
Stepper Motor - 29 oz.in (200 steps/rev, Threaded Shaft)
These steppers have a threaded shaft, which allows them to be used as a linear actuator. As the motor runs, it moves along the shaft at a specific rate of 1cm per 5 full rotations. These are a good choice for linear motion where precision and repeatability are important. Note: It looks like the ...
Stepper Motor 42BYG
The 42BYG is a NEMA 17 bipolar stepper motor with a shaft-reversed design, commonly used in 3D printers, CNC machines, and DIY motion-control projects. With a 1.8° step angle and 40 N·cm holding torque, it provides reliable, precise positioning. The motor comes with a 70 cm 4-lead wire (AWG26 UL...
Pololu Aluminum Scooter Wheel Adapter for 1/4 Shaft
This two-part aluminum assembly mounts directly to 1/4 inch diameter motor output shafts like those on our NEMA 23 stepper motors and allows you to drive most scooter, skateboard, inline skate, and other common wheels that are compatible with popular 608 ball bearings. Two M4 set screws are...
Stepper motor - NEMA-17 size - 200 steps/rev, 12V 350mA
·
A stepper motor to satisfy all your robotics needs! This 4-wire bipolar stepper has 1.8° per step for smooth motion and a nice holding torque. The motor was specified to have a max current of 350mA so that it could be driven easily with an Adafruit motor shield for Arduino (or other motor driv...
