All Products

SKU: SF-ROB-09454

The SparkFun QRE1113 Line Sensor Breakout (Digital) is a compact IR reflectance sensor board that outputs a digital signal based on surface reflectivity. It uses a capacitor discharge circuit — the faster the 10 nF capacitor discharges, the more reflective the surface. This makes it straightforwa...

SKU: SF-SEN-14722

This SparkFun Distance Sensor Breakout utilizes the VL53L1X next generation ToF (Time of Flight) sensor module to give you the highly accurate measurements at long ranges for its size. The VL53L1X uses a VCSEL (Vertical Cavity Surface Emitting Laser) to emit an Infrared laser to time the ref...

SKU: SF-ROB-09453

This version of the QRE1113 breakout board features an easy-to-use analog output, which will vary depending on the amount of IR light reflected back to the sensor. This tiny board is perfect for line sensing applications and can be used in both 3.3V and 5V systems. The board’s QRE1113 IR refle...

SKU: SF-SEN-23220 · MPN: SEN-23220

Measure visible and near-infrared light with a compact Qwiic breakout based on the AS7343 multi-spectral sensor. It covers approximately 380nm to 1000nm and is suited to reflected, emitted and transmitted light measurements for spectroscopy tasks such as colour matching and spectral signature ana...

SKU: SF-SEN-24048 · MPN: SEN-24048

A line follower sensor gives your robot the ability to detect lines or nearby objects. The sensor works by detecting reflected light coming from its own infrared LED. By measuring the amount of reflected infrared light, it can detect transitions from light to dark (lines) or even objects directly...

SKU: SF-COM-09542

The QRE1113 is a small IR reflectance sensor. This sensor is often used in line following robots because, if it can sense if a surface is white or black. There are four pins on the QRE1113 - two control the IR emitting LED while the other two are the collector and emitter of a phototransisto...

SKU: SF-SEN-11769

The Line Follower sensor is an add-on for your RedBot that gives your robot the ability to detect lines or nearby objects. The sensor works by detecting reflected light coming from its own infrared LED. By measuring the amount of reflected infrared light, it can detect transitions from light t...

SKU: SF-SEN-13582

The SparkFun Line Follower Array is a long board consisting of eight IR sensors that have been configured to read as digital bits! We have designed the SparkFun Line Follower Arrays to follow a dark line of about ¾ inch width or smaller (spray paint or electrical tape) on a light background. Each...

SKU: SF-SEN-15335

The SparkFun 9DoF IMU Breakout brings InvenSense's ICM-20948 9-axis motion tracking sensor to a Qwiic-enabled breakout board with an on-board logic level shifter and broken-out GPIO pins. The ICM-20948 is an extremely low-power sensor supporting both I2C and SPI communication, suited for wearable...

SKU: SF-SEN-23880 · MPN: SEN-23880

The SparkFun TMAG5273 Linear 3D Hall-Effect Sensor is a low-power, high-precision magnetic field sensor that detects the presence, strength, and direction of magnetic fields in three dimensions. Built on a standard 25.4 × 25.4 mm (1 × 1 in) Qwiic breakout, it communicates over I²C with no solderi...

SKU: SF-SEN-18020

The SparkFun LSM6DSO 6 Degrees of Freedom Breakout is an accelerometer and gyroscope sensor with a giant 9kB FIFO buffer and embedded processing interrupt functions. Due to the capabilities and low cost of the LSM6DSO we've created this small breakout board just for you! Each LSM6DSO breakout has...

SKU: AF-4404

These reflectance sensors feature a linear array of IR emitter/phototransistor pair modules in a high-density (4 mm pitch) arrangement, which makes them well suited for applications that require precise detection of changes in contrast, such as line sensing. A variety of sensor counts are av...

SKU: DF-SEN0017

This is a line tracking (following) sensor to guide your robot by telling white from black quickly and accurately. It is commonly used in arduino robot project, and probably is the best line following sensor in the market. Line following is the most basic function of smart mobile...

SKU: SF-SEN-15177

The SparkFun VCNL4040 Proximity Sensor Breakout detects objects qualitatively up to 20 cm away using infrared proximity sensing. It also includes a built-in ambient light sensor, making it a versatile dual-function module. With no dead zone, it can read objects all the way to the face of the sens...

SKU: SF-SEN-16304

The SparkFun TMP102 Qwiic breakout provides accurate digital temperature readings over I2C with minimal wiring. Based on the Texas Instruments TMP102, the sensor delivers 0.0625 °C resolution and ±0.5 °C accuracy, communicating entirely over the I2C bus — no analogue conversion needed. This vers...

SKU: SF-SEN-21325

Looking for an extremely accurate way to detect motion utilizing AI? We've got you covered with the Qwiic-enabled, SparkFun LSM6DSV16X 6DoF IMU Breakout. The LSM6DSV16X, from STMicroelectronics, is a high-performance, low-power 6-axis IMU, featuring a 3-axis digital accelerometer, and a 3-axis di...

SKU: SF-SEN-14843

It’s time to say hip hip array for this IR Breakout! The MLX90640 SparkFun IR Array Breakout is equipped with a 32x24 array of thermopile sensors creating, in essence, a low resolution thermal imaging camera. With this breakout you can detect surface temperatures from many feet away with an accur...

SKU: LB-LR0005

The Line Trace Sensor Module uses an infrared emitter/detector pair to measure the reflectivity of a surface below it. When the reflectivity exceeds an adjustable threshold, the output goes low — making it ideal for building line-following robots and edge-detection systems. The onboard potentiom...

SKU: SF-KIT-15367

The SparkFun Qwiic Kit for Raspberry Pi provides everything you need to start using I2C sensors and displays with your Raspberry Pi via the Qwiic connector system. The kit includes a Qwiic HAT that adds four Qwiic connectors to your Pi's GPIO header, along with three sensor/display breakouts and ...

SKU: SF-DEV-17047

The SparkFun Qwiic GPIO adds eight additional digital I/O pins to your project via I2C, based on the TCA9534 I/O Expander from Texas Instruments. Read and write pins just like standard Arduino digital pins using the included library — functions mirror familiar pinMode and digitalWrite calls. All...