All Products
Showing 1-20 of 60 products
Small Reduction Stepper Motor - 12VDC 32-Step 1/16 Gearing
·
This is a great first stepper motor, good for small projects and experimenting with steppers. This uni-polar motor has a built in mounting plate with two mounting holes. There are only 32 step (11.25 degree) per revolution, and inside is a 1/16 reduction gear set. (Actually its 1/16.032 but for m...
Small Reduction Stepper Motor - 5VDC 32-Step 1/16 Gearing
·
This is a great first stepper motor, good for small projects and experimenting with steppers. This uni-polar motor has a built in mounting plate with two mounting holes. There are only 32 step (11.25 degree) per revolution, and inside is a 1/16 reduction gear set. (Actually its 1/16.032 but for m...
DFRobot 24V 600kg·cm IP65 Brushless PWM Servo
·
This industrial-grade motion actuator is built for high-load applications that need serious torque, accurate position control and rugged construction. It combines a 24V brushless motor with a 12-bit magnetic encoder for stable, high-resolution angle feedback.With stall torque up to 600kg·cm, a 39...
Micro Metal Geared Stepper Motor (12V 0.6kg.cm)
INTRODUCTION This is a miniature stepper motor with 100:1 metal reduction gear box for enhanced torque. It has a voltage input range of 5 - 12V DC. This product is suitable for the 3D printers and applications which require precise rotation control. Note: Please limit the motor current, or o...
HRB8825 Stepper Motor HAT For Raspberry Pi
HRB8825 Stepper Motor HAT For Raspberry Pi, Drives Two Stepper Motors, Up To 1/32 Microstepping Stepper Motor HAT (B) Alternative Solution Of Stepper Motor HAT, Drives Two Stepper Motors, Up To 1/32 Microstepping For 3D Printer, Sculpturing machine, Mechanical arm... Features At A ...
PD Stepper NEMA 17 USB-C PD Driver and Controller
·
Stepper motor builds often need a microcontroller, a separate driver, a 12V or 24V supply and plenty of wiring. This compact controller from Things by Josh brings that stack together in one unit designed to mount directly to the back of a standard NEMA 17 stepper motor.Power comes in via USB-C Po...
Gravity: DC Micro Metal Gear Motor w/Driver - 75:1
A compact DC micro metal gear motor with a built-in driver that uses the DFRobot Gravity 3-pin interface. Simply connect to a microcontroller and control direction and speed with a single PWM signal — no external H-bridge required. The embedded driver accepts standard servo-style PPM signals, so...
TB6600 arduino Stepper Motor Driver
The TB6600 is a professional stepper motor driver for two-phase stepping motors, compatible with Arduino and other microcontrollers that output 5V digital pulse signals. With a wide 9–42VDC power input and up to 4A peak current output, it handles most 42-type and 57-type stepper motors. Features...
Hobby Motor with Encoder - Plastic Gear (Red)
·
Add motion and feedback to small robotics builds with this single DC gearmotor and integrated Hall effect speed encoder. Instead of simply driving a motor open-loop, your microcontroller can count encoder pulses to track wheel rotation and speed for more accurate navigation and speed control.The ...
REV Robotics Smart Robot Servo
·
This configurable metal-geared servo can be used as a standard angular servo, a custom-limit angular servo, or a continuous-rotation actuator. It accepts conventional PWM input, so it can drop into many robotics builds while adding useful reconfiguration options when used with the optional REV SR...
Adafruit DRV8833 DC/Stepper Motor Driver Breakout Board
·
The Adafruit DRV8833 is a dual H-bridge motor driver breakout, capable of driving two DC motors bidirectionally or one bipolar/unipolar stepper motor at up to 1.2 A per channel. It's well suited for low-voltage applications, operating from 2.7V to 10.8V motor power. The DRV8833 features built-in...
Metal DC Geared Motor w/Encoder - 12V 83RPM 45Kg.cm
This 12 V DC geared motor (model GB37Y3530-12V-83R) pairs a powerful brushed motor with a 131:1 metal gearbox and an integrated Hall-effect quadrature encoder. The encoder provides 16 counts per revolution on the motor shaft — equivalent to 2096 counts per revolution on the gearbox output — givin...
Metal Gearmotor with Encoder - 12V (9.7:1)
This 12V brushed DC gearmotor features a 9.68:1 metal spur gearbox and an integrated 48 CPR quadrature encoder on the motor shaft, providing 464.64 counts per revolution of the gearbox output. The two-channel Hall effect encoder senses a magnetic disk on the motor shaft, delivering speed and dire...
Metal DC Geared Motor - 12V 100RPM 42kg.cm
This is a metal DC geared motor, 100% pure copper coils, high-density molecular layer, 50:1 metal reducer, small size, large torque. The maximum torque could arrive 42 kg.cm, stable and durable! SPECIFICATIONS Rated voltage: 12 V Gear reduction ratio: 50:1 D output shaft diameter: 6 mm N...
Adafruit TMC2209 Stepper Motor Driver Breakout Board
·
The Adafruit TMC2209 Stepper Motor Driver Breakout Board makes controlling stepper motors easy and virtually silent. Using Trinamic's "Stealth Chopper" technology, this driver delivers smooth, quiet microstepping with just two control pins — no timers, PWM, or real-time microcontroller required. ...
SparkFun Mini Stepper Motor Driver - TC78H670FTG
·
The SparkFun Mini Stepper Motor Driver empowers you to control bipolar stepper motors with ease and precision. This compact driver, measuring just 0.6in. by 0.8in. with breadboard-friendly 0.1in. pin spacing, shines in space-constrained projects and prototyping applications. Getting started is a ...
Adafruit A4988 Stepper Motor Driver Breakout Board
·
The Adafruit A4988 Stepper Motor Driver Breakout simplifies stepper motor control down to just two pins — a direction pin and a step pin. Each pulse on the step pin advances the motor by one step or microstep, making it straightforward to achieve precise, controlled motion without complex timer o...
Geared DC Motor with Magnetic Encoder Outputs - 7 VDC 1:20 Ratio
·
This geared DC motor comes with a built-in magnetic encoder — a magnetic wheel and two Hall effect sensors are already attached to the motor body, giving you quadrature feedback for both speed and direction without any extra wiring or mounting. It's the ideal starting point for closed-loop motor ...
TinyG CNC Controller Board v8
·
The TinyG project is a high performance, USB based CNC 6-axis controller that supports XYZ linear and ABC rotary axes with 4 motor outputs. It is designed for small CNC applications and other applications that require highly controllable motion control. TinyG is meant to be a complete embedded so...
Mini Stepper Motor - 200 Steps - 20x30mm NEMA-8 Size
·
A compact NEMA-8 bipolar stepper motor with the same 1.8° step angle (200 steps/revolution) as full-size NEMA-17 motors, but in a much smaller 20 × 30 mm package. Ideal for compact CNC builds, small robotics, and space-constrained motion control projects. This 4-wire bipolar stepper is rated for...
