All Products
Showing 1-20 of 60 products
GPRS/GSM + GPS A9G Pudding/SMS/Voice/Wireless Data Transmission + Positioning IOT Development Board
32u4 with A9G GPRS GSM GPS-V1.1
Arduino GSM/GPRS Shield
GPS Shield With Antenna
Arduino GSM Shield (antenna connector)
Adafruit FONA 808 - Mini Cellular GSM + GPS Breakout
GSM/GPRS/GNSS/Bluetooth HAT for Raspberry Pi
Adafruit Ultimate GPS Logger Shield - Includes GPS Module
SIM868 GSM GPRS GNSS Bluetooth 3.0 HAT for Raspberry
SIM7070G Global NB-IoT Communication Module with GNSS Positioning
MPN: TEL0182
SIM7600G-H-M2 4G Communication Module
SIM7000E Arduino NB-IoT/LTE/GPRS/GPS Expansion Shield
Ultimate GPS Module - 66 channel w/10 Hz updates [MTK3339 chipset]
SIM5360E 3G Shield
Gravity: CAT1 SIM7600G Global 4G Communication and GNSS Positioning Module (10Mbps/5Mbps)
MPN: TEL0161
Adafruit Ultimate GPS Breakout with GLONASS + GPS - PA1616D
GPS Receiver for Arduino (Model A)
Gravity: High-Speed CAT4 SIM7600G-H Global 4G Communication and GNSS Positioning Module (150Mbps/50Mbps)
MPN: TEL0162
Arduino Compatible Long Range LoRa Shield
SIM7600G-H 4G HAT (B) for Raspberry Pi, LTE Cat-4 4G / 3G / 2G Support, GNSS Positioning, Global Band
GPRS/GSM + GPS A9G Pudding/SMS/Voice/Wireless Data Transmission + Positioning IOT Development Board
The A9G development board is a compact IoT module combining GPRS/GSM cellular connectivity with GPS/BDS dual-mode positioning. Based on the A9G module, it supports voice calls, SMS, GPRS data networking, and real-time location tracking — all on a single board. Packed with peripherals including a...
32u4 with A9G GPRS GSM GPS-V1.1
An all-in-one development board combining an ATmega32U4 microcontroller with an A9G GPRS/GSM/GPS module. Capable of making voice calls, sending SMS text messages, and providing GPS positioning — all controllable via AT commands over serial. The board includes analogue, I2C, and digital expansion ...
Arduino GSM/GPRS Shield
The GPRS/GSM Shield provides you a way to use the GSM cell phone network to receive data from a remote location. The shield allows you to achieve this via any of the three methods: Short Message Service Audio GPRS Service The GPRS Shield is compatible with all boards which have the sam...
GPS Shield With Antenna
The GPS Shield is based on the u-blox NEO-6M receiver module and plugs directly into Arduino UNO, Mega, and compatible boards. It provides GPS positioning data via a serial port connection (pins configurable to D0–D7) and includes a micro SD card slot for data logging. An active IPC antenna is i...
Arduino GSM Shield (antenna connector)
The Arduino GSM Shield allows an Arduino board to connect to the internet, make and receive voice calls, and send and receive SMS messages. It uses the Quectel M10 radio modem and can be controlled via AT commands or the built-in Arduino GSM library. The shield communicates with the Arduino via ...
Adafruit FONA 808 - Mini Cellular GSM + GPS Breakout
The Adafruit FONA 808 combines 2G cellular connectivity with integrated GPS tracking in a compact 1.75 × 1.6-inch breakout. Built around the SIM808 module with an MT3337 GPS chipset, it provides voice calling, SMS, GPRS data, and GPS geolocation — all controlled over a single serial port via AT c...
GSM/GPRS/GNSS/Bluetooth HAT for Raspberry Pi
NOTE: This product is only 2G Compatible! Unfortunately while there are still 2G networks in some parts of America and Europe, there are no longer 2G networks in Australia anymore.Prohibited by the module manufacturer SIMCOM, we're not allowed to ship this product, or to provide any tech supp...
Adafruit Ultimate GPS Logger Shield - Includes GPS Module
The Adafruit Ultimate GPS Logger Shield combines the popular Ultimate GPS module with a MicroSD card slot, giving your Arduino a complete GPS datalogging solution. Built around the MTK3339 chipset, it tracks up to 22 satellites on 66 channels with -165 dBm sensitivity and delivers up to 10 positi...
SIM868 GSM GPRS GNSS Bluetooth 3.0 HAT for Raspberry
Raspberry Pi connectivity, compatible with Raspberry Pi 2B/3B/3B+/Zero/Zero WSupports SMS, phone call, GPRS, DTMF, HTTP, FTP, MMS, email, etc.Support GPS, COMPASS, Glonass, LBS base station positioning, omni-positioningBluetooth 3.0, supports data transferring through BluetoothOnboard USB TO UART...
SIM7070G Global NB-IoT Communication Module with GNSS Positioning
· MPN: TEL0182
The SIM7070G is a globally compatible NB-IoT communication module supporting CAT-M, NB-IoT, GSM, GPRS, and EDGE wireless protocols. It also features integrated GNSS satellite positioning with support for GPS, GLONASS, BeiDou, and Galileo — making it a versatile solution for IoT connectivity and a...
SIM7600G-H-M2 4G Communication Module
The SIM7600G-H-M2 is the LTE Cat 4 module that supports wireless communication modes of LTE-TDD, LTE-FDD, HSPA+, GSM, GPRS, EDGE, etc. It supports maximum 150Mbps downlink rate and 50Mbps uplink rate.The SIM7600G-H-M2 adopts M.2 form factor and M.2 B KEY interface and consists of a SIM7600-H modu...
SIM7000E Arduino NB-IoT/LTE/GPRS/GPS Expansion Shield
NB-IoT (Narrow Band-Internet of Things) technology is a new IoT technical branch and supports cellular data network connection of low power consumption device in WAN (Wide Area Network), which also called as LPWAN. NB-IoT operates in authorized frequency spectrum. It can be directly deployed t...
Ultimate GPS Module - 66 channel w/10 Hz updates [MTK3339 chipset]
A high-sensitivity GPS module built around the MTK3339 chipset, capable of tracking up to 22 satellites on 66 channels with 10 Hz position updates. At just 16 × 16 × 5 mm and under 6 grams, it packs an internal patch antenna, built-in datalogging, and ultra-low power consumption into a tiny footp...
SIM5360E 3G Shield
The SIM5360E series is Dual-Band HSPA+/WCDMA and Quad-Band GSM/GPRS/EDGE module solution in a SMT type which supports HSPA+ up to 14.4Mbps for downlink data transfer.supports 3G network and combines GPS technology for satellite navigation. Besides, it also supports A-GPS that available for indoor...
Gravity: CAT1 SIM7600G Global 4G Communication and GNSS Positioning Module (10Mbps/5Mbps)
· MPN: TEL0161
##Introduction The SIM7600G is an integrated wireless communication module. It features 4G CAT1 with an uplink speed of 5Mbps and a downlink speed of 10Mbps, and supports GNSS positioning (GPS, BD, GLONASS). The module is compatible with Raspberry Pi, Arduino, and LattePanda single-board computer...
Adafruit Ultimate GPS Breakout with GLONASS + GPS - PA1616D
The Adafruit Ultimate GPS Breakout with GLONASS + GPS is an enhanced version of the popular Ultimate GPS, built around the MTK3333 chipset with PA1616D module. It supports both GPS and GLONASS satellite networks, tracking up to 33 satellites on 99 channels for improved coverage and accuracy world...
GPS Receiver for Arduino (Model A)
This GPS Receiver is Discontinued Now, We recommend other best selling GPS Sensor as a suitable replacement. GPS receivers can be easily found in daily life, such as smartphones, cars, and tablets. They are used to track the loaction all over the globe. This GPS Receiver for A...
Gravity: High-Speed CAT4 SIM7600G-H Global 4G Communication and GNSS Positioning Module (150Mbps/50Mbps)
· MPN: TEL0162
##Introduction The SIM7600G-H is an integrated wireless communication module featuring 4G CAT4 (with anuplink speed of 50Mbps and a downlink speed of 150Mbps) and GNSS positioning (supportingGPS, BD, GLONASS). It extensively supports multiple bands, including LTE-FDD, LTE-TDD, WCDMA,and GSM, maki...
Arduino Compatible Long Range LoRa Shield
The Arduino Compatible Long Range LoRa Shield turns your Arduino into a LoRa wireless node capable of transmitting and receiving data over several kilometres — without the need for a GSM network. Built around the Semtech SX1276 transceiver on the 915MHz band (Australian-legal), it's ideal for rem...
SIM7600G-H 4G HAT (B) for Raspberry Pi, LTE Cat-4 4G / 3G / 2G Support, GNSS Positioning, Global Band
4G HAT FOR RASPBERRY PI Enabling LTE Cat-4 4G / 3G / 2G Communication & GNSS Positioning Based on SIM7600G-H, Global Band Features At A Glance Connected via pogo pin or MicroUSB connector Dedicated pogo pin for Raspberry Pi Zero/Zero W MicroUSB connector for other Raspberry Pi boards or...