All Products

SKU: KI-5641

Take your micro:bit robotics builds to the next level with the Kitronik All-in-one Robotics Board. This all-in-one control solution lets the BBC micro:bit drive up to 4 motors (or 2 stepper motors) and 8 servos, making it the perfect foundation for a wide variety of robotics projects. The board ...

SKU: MM-SKU00073

The MonkMakes Servo for micro:bit board provides a really easy way to attach up to three servomotors to a BBC micro:bit. The board requires a power supply or battery pack to provide 5 or 6V to the servomotors. It includes a voltage regulator that will supply 3V back to the micro:bit, so that you ...

SKU: AF-3928

The Adafruit CRICKIT for micro:bit is a robotics and electronics driver board designed for the BBC micro:bit. Plug your micro:bit into the 40-pin edge connector and start controlling motors, servos, solenoids, NeoPixels, capacitive touch sensors, and a speaker — all managed over I2C via the Adafr...

SKU: KI-5612

Take your robotics project to the next level with the (i2C) Kitronik 16 Servo Driver Board for the BBC micro:bit.Capable of controlling 16 servos which are powered directly from the board's power supply. The board can be powered either through the terminal blocks or the on-board header for radio ...

SKU: EF-EF09083

The ElecFreaks EF90D is a compact 360-degree continuous rotation digital servo designed for use with the BBC micro:bit. It operates at 3V, making it well-suited for micro:bit-powered robotics and motorised projects. The included wheel and tyre let you get moving straight away. Key Features 360...

SKU: EC-DTS09534M

This motor/ servo shield is for Micro: bit, it provides a simple way to add motor driving capability to a micro: bit. The shield can drive 2 motors, 2 servos, and allow the motors to be driven with forward, reverse, stop control. It’s easy to add the motor to the shield, and there is an integrate...

SKU: DF-DFR0548

Since the advent of micro:bit, its simple and practical way of programming is widely loved by makers, students and teachers. Its sample design, coupled with a wealth of pin resources, give it infinite possibilities. This expansion board not only leads to 9 micro:bit onboard GPIO interfaces, ...

SKU: EF-EF05043

The Nezha Breakout Board is a feature-packed expansion board for the micro:bit, designed with classroom use in mind. It integrates 4 servo drivers, 4 motor drivers, and 7 sensor ports — all using RJ11 connectors with foolproof anti-reversal design, so students can plug in confidently without dama...

SKU: DF-DFR1216-1 · MPN: DFR1216-1

This multi-function expansion board adds power, I/O and drive capability to UNIHIKER M10/K10 and micro:bit projects. It is designed for mobile robots, portable interactive builds and maker projects that need more connectivity than the main controller can provide on its own.The board expands your ...

SKU: DF-MBT0044-1 · MPN: MBT0044-1

This bundle adds motor, servo and sensor expansion to the UNIHIKER M10 single-board computer, using the included Type-C to HY2.0-4P communication cable to bridge the M10 to the expansion board.The board includes an integrated 18650 battery holder so your controller, motors and sensors can run fro...

SKU: SF-ROB-16787

The Kitronik: MOVE mini MK 2 buggy kit for the BBC micro:bit is the latest version of the ever popular :MOVE mini that provides a fun introduction to robotics. The :MOVE mini is a 2 wheeled robot that is suitable for autonomous operation, remote control projects via a Bluetooth application or bei...

SKU: KI-5620

This board provides a simple way to add motor driving capability to a BBC micro:bit. It allows two motors to be driven with full forward, reverse & stop control. It has terminal blocks to connect four input devices and a regulated 3V supply is fed in to the 80 way connector to power the ins...

SKU: EF-EF09082

EF92A is a kind of 180 deg analog servo. It is light and portable, a little bigger than 5 cent coin. It works at 3V voltage and can be used to make small robot modules, mechanical arm modules and intelligent car modules.ParametersProduct SKU: EF09082Operating Voltage: 3.0V-5.5VOutput Torque: 1.6K...

SKU: KS-KS4035

Introducing the Micro:bit 4WD Mecanum Robot Car V2.0 – the ultimate smart car for all your coding and robotics needs! This innovative product is based on the popular Micro:bit platform and boasts a variety of functions such as servo control, ultrasonic following, line tracking, and infrared and B...

SKU: DF-MBT0012

The micro:IoT is a feature-packed IoT expansion board for the BBC micro:bit. It integrates Wi-Fi connectivity, an OLED display, motor drivers, servo outputs, and a range of I/O ports into a compact cloud-shaped PCB — everything needed to build IoT projects with minimal setup. Designed to work wi...

SKU: EF-EF09081

EF90D is a kind of 360 deg analog servo. It is light and portable, a little bigger than 5 cent coin. It works at 3V voltage and uses pulse width to adjust speed of the servo rotation, which also can be used to make small robot modules, mechanical arm modules and intelligent car modules. Parame...

SKU: AF-815

The Adafruit 16-Channel PWM/Servo Driver uses the PCA9685 chip to provide 16 channels of 12-bit PWM output over I2C. With a built-in clock, the driver runs independently — no need to continuously send signals from your microcontroller. Ideal for controlling servos, LEDs, or any PWM-driven device....

SKU: KI-5698

A compact motor driver board for the BBC micro:bit that drives two DC motors or one stepper motor. The integrated edge connector lets the micro:bit slot in directly, with built-in protection against short circuits, overcurrent, and overheating. Power is supplied via terminal block or servo conne...

SKU: KI-5646

The ACCESS:bit is a bolt-on/clip-on board for the BBC micro:bit that simulates an access barrier. It includes a servo-driven barrier arm, an integrated 3×AAA battery cage with on/off switch, and a buzzer for sound effects. The ACCESS:bit joins the Kitronik family of transportation micro:bit acces...

SKU: EF-EF03413

Robit is a motherboard of smart car based on micro:bit. It is compatible with MBOT. Except for the integration of the simple and convinient RJ25 connector，motor connector and sensor on MBOT, we have extended 4 DC motor connectors, 2 stepping motor connectors(same with 4 DC motor connectors), 8...