All Products

SKU: DF-FIT0817 · MPN: FIT0817

Keep your Raspberry Pi running cooler with this compact aluminium heatsink and fan kit for Raspberry Pi 3B, 3B+ and 4B boards. The main heatsink uses a slotted surface to help dissipate heat from the CPU.Two 7 mm 9-blade cooling fans are mounted on the large aluminium heatsink for active cooling....

SKU: AF-3082

A tall-profile aluminium heatsink with pre-applied thermal adhesive for easy installation on the Raspberry Pi 3 and other single board computers. The taller 15mm height provides greater surface area for improved heat dissipation compared to shorter heatsinks. Simply peel off the protective film a...

SKU: AF-2250

An orange polycarbonate case base for the Raspberry Pi Model B+, Pi 2, Pi 3 Model B, and Pi 3 Model B+. The snap-together design lets you mix and match coloured lids and bases for custom combinations. This listing is for the base only — lids are available separately. Made from durable, glossy po...

SKU: LB-LS1504

A dual-fan cooling kit with heatsinks for the Raspberry Pi 2 and 3 Model B. The two small fans mount directly over the processor and provide active airflow to reduce operating temperatures during heavy workloads. Adhesive thermal tape is included for easy, tool-free installation of the heatsinks....

SKU: YH-6000300079

A GPIO expansion board that multiplies a single Raspberry Pi 40-pin GPIO header into three parallel rows. This allows you to stack multiple HATs, breakout boards, or jumper wire connections on the same set of GPIO pins simultaneously. Key Features 1-to-3 GPIO Expansion – Three full 40-pin head...

SKU: PI-COM1202

The Raspberry Pi 3 is undoubtedly cool, but if your project is particularly resource-hungry then it may run a little hot. Cool it down with this nifty little heatsink!Simply remove the backing from the pre-applied thermal tape and stick it on top of the main processor chip on the Raspbe...

SKU: AF-3083

A compact aluminium heatsink with pre-applied thermal adhesive for easy installation on the Raspberry Pi 3 and other single board computers. Simply peel off the protective film and press firmly onto the processor — no additional thermal paste or clips required. In testing, a Raspberry Pi 3 witho...

SKU: AF-2029

The Raspberry Pi B+/Pi 2/ Pi 3 has landed on the Maker World like a 40-GPIO pinned, quad-USB ported, credit card sized bomb of DIY joy. And while you can use most of our great Model B accessories by hooking up our downgrade cable, its probably a good time to upgrade your set up and accessorize...

SKU: LB-RPI3-A-PLUS-STARTER-KI

This exclusive Raspberry Pi Starter Kit from Little Bird includes the best and fastest Raspberry Pi, the Raspberry Pi 3 Model A+ (Plus) along with everything you'll need to get up and running within minutes! The 4th Generation Raspberry Pi 3 Model A+ is 10x faster than the original and incor...

SKU: LB-RPI3-HEAT

This CNC-machined aluminium alloy case for the Raspberry Pi 3 doubles as a passive heatsink, drawing heat away from the processor and significantly reducing operating temperatures without the need for a fan. The solid aluminium construction provides both thermal management and physical protection...

SKU: AF-3055

Did you really think the Raspberry Pi would stop getting better? At this point, we sound like a broken record, extolling on the new Pi’s myriad improvements like we’re surprised that the folks at the Raspberry Pi Foundation are continuously making their flagship board better.  Still, w...

SKU: PR-PIM341

The Pibow Coupé is a slim, open-top acrylic case for the Raspberry Pi, designed for easy access to GPIO pins and HAT compatibility. The Coupé Red version features vibrant red layers with transparent top and base, keeping your Pi visible inside. Crafted from five laser-cut layers of high-quality ...

SKU: AF-2244

A snap-on replacement lid in smoke grey for the Raspberry Pi Model B+/Pi 2/Pi 3 polycarbonate case. Mix and match with different coloured bases to customise your Pi's look. The super-glossy polycarbonate is durable enough for bags and toolboxes. The lid fits snugly onto the case base with slim o...

SKU: PI-COM0004

This extra-tall 2×20 female header is designed to connect custom PCBs and HATs to the Raspberry Pi GPIO pins. At 16.5 mm tall, it provides enough clearance for your board to sit above the Ethernet and USB jacks without interference. The header has 3 mm pin length on the underside, so there's no ...

SKU: EC-RPA07510C

This case is specially designed for Raspberry Pi 3B+, and it is compatible with Raspberry Pi 3/ 2 Model B. The unique fit design allows the Raspberry Pi to be better placed, it is easy to install. It comes with a cooling fan in it and 3 pieces aluminum heat sink for your Raspberry Pi better heat ...

SKU: PR-PIM343

The Pibow Coupé Royale is a slim, colourful, layered acrylic case for the Raspberry Pi 3 B+, 3, and 2. Five laser-cut layers of high-quality cast acrylic stack together to securely enclose your Pi while leaving all ports, the camera connector, display connector, and GPIO fully accessible. The tr...

SKU: AF-4728

A replacement CSI/DSI flex connector for the Raspberry Pi. If the camera or display connector on your Pi has been damaged — snapped arms, broken latch — this part lets you rework it rather than replacing the entire board. The same connector is used for both the Camera (CSI) and Display (DSI) por...

SKU: AF-3114

Have you always wanted to binge-watch Battlestar Galactica on a single-board computer? We have! And that's why we put together this Raspberry Pi Media Center kit for Raspberry Pi Model 3's! Based around the OSMC media center, this kit includes everything you need to get going on building ...

SKU: AF-3062

Complete your Pi setup with our custom designed faceplate specifically designed to fit your 2.8" PiTFT and Adafruit Pi B+ / Pi 2 / Pi 3 case base! This Clear Case Base and Faceplate and Buttons Combo Pack is a simple way to enclose your 2.8" PiTFT and Pi safely and in style...

SKU: AF-6360 · MPN: ADA6360

This SmartiPi Touch Pro 3 enclosure is designed for the Raspberry Pi Touch Display 2, giving your touchscreen project a tidy, mountable case with room inside for extra hardware. It is compatible with Raspberry Pi 3, 4 and 5 boards.This version includes the Small 25mm deep cover. SmartiPi also off...