All Products

SKU: AF-5961 · MPN: ADA5961

The Adafruit Qwiic / STEMMA QT Breakout Board bridges the gap between the STEMMA QT / Qwiic connector world and standard 0.1" breadboard pins. One end has a JST SH-compatible connector for plug-and-play I2C, and the other has four 0.1" spaced pads for soldering headers or wires to a breadboard. ...

SKU: SF-PRT-17912

This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and a breadboard hookup pigtail on the other. The cable insulation is made from a highly malleable material making it more flexible than our original Qwiic cable particularly in tight spaces o...

SKU: AF-5637

The Adafruit QT 5V to 3V Shifter Breakout lets you safely connect 3.3 V STEMMA QT / Qwiic sensors to 5 V microcontrollers like the Arduino Uno. Many I2C sensors and Qwiic-compatible devices are not 5 V safe — connecting them directly to a 5 V board risks damage. This breakout handles the voltage ...

SKU: SF-ROB-19224

A servo adapter cable with a shrouded male servo connector on one end and three individual breadboard-compatible pigtail wires on the other. Makes it easy to connect a servo to a breadboard, development board, or any standard hookup wire connection. Specifications Connector – Shrouded male ser...

SKU: AF-5649

The Adafruit QT 3V to 5V Level Booster Breakout lets you connect 3.3 V STEMMA QT / Qwiic devices to sensors and peripherals that require 5 V power or logic. Most modern microcontrollers (ESP32, RP2040, SAMD, micro:bit) run at 3.3 V, but some sensors and modules still need 5 V — this board bridges...

SKU: AF-5189

Keep track of time even when your project loses power or gets reprogrammed. This updated PCF8523 Real Time Clock breakout features STEMMA QT / Qwiic connectors for solderless I2C wiring, plus traditional breadboard headers. It works with both 3.3 V and 5 V power and logic, making it compatible wi...

SKU: AF-5811 · MPN: ADA5811

This compact breakout gives you a high-resolution analogue voltage output from a simple I2C interface, based on the AD5693R 16-bit DAC. It includes a temperature-compensated 2.5V internal reference, making it a handy choice when you want finer output control than a typical 12-bit DAC can provide....

SKU: AF-4413

The Adafruit LSM303AGR combines a triple-axis accelerometer and triple-axis magnetometer in a single breakout board. The accelerometer measures gravity to determine which way is down, while the magnetometer senses magnetic north — combine the two for a complete compass and orientation solution. ...

SKU: SF-DEV-15443

The SparkFun RedBoard Artemis Nano packs the powerful Artemis module into a minimal, 0.8 mm thick PCB with USB-C programming, on-board LiPo battery charging, and a Qwiic connector. It's a compact, modern replacement for the Arduino Uno or Nano with significantly more processing power, memory, and...

SKU: SF-SEN-15177

The SparkFun VCNL4040 Proximity Sensor Breakout detects objects qualitatively up to 20 cm away using infrared proximity sensing. It also includes a built-in ambient light sensor, making it a versatile dual-function module. With no dead zone, it can read objects all the way to the face of the sens...

SKU: SF-LCD-22495 · MPN: LCD-22495

A compact monochrome OLED breakout board featuring a 64×48 pixel blue-on-black display (0.66" diagonal). Equipped with two Qwiic connectors for solderless I²C connection, plus 0.1"-spaced header pins for breadboard use. The board includes I²C pull-up and address jumpers on the back for flexible c...

SKU: AF-5880 · MPN: ADA5880

The Adafruit I2C STEMMA QT Rotary Encoder Breakout comes with a 24-detent rotary encoder with push-switch pre-soldered, so you can start twisting right away. An onboard microcontroller running Adafruit's seesaw firmware handles all pulse tracking, debouncing, and pin management — simply read enco...

SKU: SF-DEV-15164

The SparkFun Qwiic OpenLog is an I²C-based data logger that stores serial data to a microSD card. Based on the popular OpenLog, this version replaces the serial interface with I²C and Qwiic connectors, allowing you to daisy-chain multiple sensors and log data without occupying your serial port. ...

SKU: SF-GPS-15210

The SparkFun SAM-M8Q GPS Breakout features a u-blox SAM-M8Q 72-channel GNSS receiver with a built-in chip antenna. It supports GPS, GLONASS, Galileo, and BeiDou constellations simultaneously, providing improved positional accuracy and faster satellite lock times. The board communicates over I2C ...

SKU: SF-KIT-15081

The SparkFun Qwiic Connect System is constantly growing in popularity with makers. So to make it even easier to get started, we’ve assembled this Qwiic Cable Kit for everyone. If you aren’t sure which Qwiic cable to use, this handy box includes all of them allowing you to save a little money and ...

SKU: AF-6489 · MPN: ADA6489

This breakout makes it easy to add 3D Hall-effect magnetic sensing to a microcontroller project. The TMAG5273 integrates independent X, Y and Z Hall-effect sensors with a 12-bit ADC, giving you magnetic measurements over I2C plus a built-in temperature sensor for basic temperature readings.It is ...

SKU: AF-5753

Bring your classic PC joystick back to life. This adapter board takes any legacy DE-15 game port joystick and converts its analogue X/Y axes and two buttons to I2C via an onboard ATtiny816 running the Adafruit seesaw firmware. No analogue inputs needed on your microcontroller — just plug in a STE...

SKU: SF-BOB-24474 · MPN: BOB-24474

The SparkFun Qwiic Buzzer adds simple beeps and buzzes to your projects via I2C. Make some noises to alert you when something interesting (or urgent) happens. Simply connect a Qwiic cable and load up some pre-written code to an Arduino to start making noises! The board includes an ATtiny84 with ...

SKU: SF-COM-18000

The SparkFun QwiicBus MidPoint extends the range of your I2C bus using differential signaling over standard Ethernet cables. Based on the NXP PCA9615 IC, it converts I2C signals (SCL and SDA) into four differential signals, enabling reliable communication over distances up to 100 feet (30 m) whil...

SKU: AF-4464

The Adafruit ICM-20649 breakout features a wide-range 6-DoF IMU capable of measuring up to ±30g acceleration and ±4000°/s gyroscope rotation — roughly double the range of standard IMUs. When typical ±16g accelerometers and ±2000°/s gyros aren't enough, this sensor delivers the extended measuremen...