All Products

SKU: SF-CEL-29622 · MPN: CEL-29622

Improve the signal performance of your cellular project by moving the antenna outside the enclosure. This LTE hinged external antenna helps reduce interference from internal electronics, giving your modem a cleaner signal path and a more stable connection.Designed for broad cellular compatibility...

SKU: DF-TEL0143

A wideband 5G antenna covering 600–6000MHz, compatible with all major cellular frequency bands (5G/4G/3G/2G) as well as Wi-Fi. Features an SMA connector with IPEX4 pigtail for easy connection to 5G modules, routers, and access points. The antenna supports 90° bending for flexible pointing and po...

SKU: SF-WRL-22527

This is an Extremely Efficient, Wide Band, Flexible LTE Antenna with a small footprint. This easy to install durable, flexible polymer antenna operates on greater than 45% efficiency on LTE bands from 698 – 3000MHz. For use in a wide array of applications which need LTE connectivity, including ho...

SKU: SF-WRL-17841

A compact wide-band internal antenna covering 700–2700 MHz, suitable for 4G LTE, LoRa, BLE, and other RF applications. The FPC radiator element connects via a 100mm coaxial cable with an IPEX (u.FL equivalent) connector, and 3M adhesive backing makes it easy to mount inside enclosures and project...

SKU: SF-WRL-22329 · MPN: WRL-22329

The Digi XBee 3 Global Cellular module is a compact, low-power module designed for rapid integration of cellular IoT capabilities. It combines LTE-M, NB-IoT, and 2G connectivity with Bluetooth Low Energy (BLE) and GNSS positioning in the familiar XBee 20-pin through-hole form factor. Optimised f...

SKU: DF-TEL0179 · MPN: TEL0179

Add LTE CAT1 connectivity to IoT projects and development boards with this Air780E communication module from DFRobot. It supports LTE-FDD B1/B3/B5/B8 and LTE-TDD B34/B38/B39/B40/B41 bands, making it suitable for deployments in China, India, Southeast Asia and other supported regions.The module pr...

SKU: SF-WRL-17732 · MPN: WRL-17732

The Taoglas Steedan MA350 is a low-profile 5-in-1 combination antenna designed for vehicle roofs, outdoor buildings and heavy equipment where drilling through a roof or metal panel is not feasible. Its magnetic base mounts to steel surfaces using ultra-strong neodymium magnets, while a soft foam ...

SKU: PI-PIM716 · MPN: PIM716

Clipper lets you receive and transmit data over 4G LTE cellular networks - perfect for remote or mobile projects.WiFi is great, but sometimes you want your connected project to Just Work, wherever in the world it is. Perhaps you're going to a festival and don't know if there will be wireless conn...

SKU: SF-CEL-16432 · MPN: CEL-16432

This external cellular antenna is designed for 2G, 3G, 4G and 5G modules and devices, making it a handy choice for LTE and wireless networking builds that need a compact, direct-mount antenna.The hinged design helps with positioning once installed, with rotation available on both the vertical and...

SKU: SF-WRL-22330 · MPN: WRL-22330

This compact Digi XBee 3 cellular module combines the XBee ecosystem with LTE Cat 1 connectivity, 3G fallback, BLE and GNSS positioning for secure wireless IoT devices.It is suited to moderate-bandwidth applications such as remote monitoring, mobile devices and telemetry, particularly where data ...

SKU: WS-21705

A 5G cellular HAT for Raspberry Pi featuring the Quectel RM500U-CN module with quad antenna support. This board brings high-speed 5G, 4G LTE-A, and 3G connectivity to your Raspberry Pi, Jetson Nano, or PC — supporting both 5G NSA and SA networking modes. The HAT connects via USB 3.1 (USB 2.0 com...

SKU: DF-TEL0177 · MPN: TEL0177

The Air780EU is a 4G Cat 1 communication module for IoT projects that need cellular connectivity across Europe, the Middle East, Russia, Thailand, Africa and other supported regions. It operates on LTE-FDD B1/B3/B7/B8/B20/B28 bands and provides up to 10Mbps downlink and 5Mbps uplink.It brings the...

SKU: WS-30717 · MPN: 30717

Add 4G LTE connectivity and GNSS positioning to your Raspberry Pi with this SIM7600NA-H HAT. It supports LTE Cat-4 data rates (up to 150 Mbps down / 50 Mbps up), phone calls, SMS, and multi-constellation satellite navigation — all controlled via standard AT commands. The HAT connects via the sta...

SKU: PR-PIM717

The Clipper HAT Mini adds 4G LTE cellular connectivity to your Raspberry Pi, enabling data transmission over mobile networks — perfect for remote or mobile projects where Wi-Fi isn't available. Transmitting sensor readings and control data typically uses very little data, making a small pay-as-yo...

SKU: SF-CEL-15054

This high-gain duck antenna is designed for LTE devices that operate in the 690-960MHz and 1710-2690 MHz bands. Combined with an SMA to U.FL Adapter, this duck antenna works perfectly with our LTE Cat M1/NB-IoT Shield.

SKU: WS-21707

A 4G/3G/2G communication HAT for Raspberry Pi featuring the SIM7600G-H module with LTE CAT4 speeds and global band coverage. Connect it to a Raspberry Pi, Jetson Nano, or PC via USB to enable high-speed cellular networking, cloud communication, phone calls, SMS, and GNSS positioning. The HAT use...

SKU: WS-21706

EM06-E LTE Cat-6 HAT for Raspberry Pi, dual antennas LTE-A, multi regions multi band, GNSSEM06-E LTE Cat-6 HAT for Raspberry PiSupports LTE-A and UMTS/HSPA(+) multi networksmulti-constellation high-accuracy GNSS, cloud platform communication, LTE-A networkingFeatures at a glanceThis is an LTE Cat...

SKU: WS-21708

A 5G cellular HAT for Raspberry Pi built around the SIM8202G-M2 module on Qualcomm's Snapdragon X55 platform. Supports 5G NSA and SA networking alongside 4G and 3G fallback, plus multi-constellation dual-band GNSS positioning. Connect via USB 3.1 to a Raspberry Pi, Jetson Nano, or PC for high-spe...

SKU: DF-KIT0212 · MPN: KIT0212

Designed for high-accuracy navigation projects, this kit uses Network RTK to deliver 5 cm + 1 ppm centimetre-level positioning across a typical 15-20km operational range. Its onboard 4G module receives RTCM correction data from a CORS network via the Ntrip protocol, removing the need for a local ...

SKU: SF-CEL-00675

This is a fantastic find for SFE. A small, high-quality, quad-band, standard SMA terminated, cellular antenna. Specifications: GSM/850E : 824 to 894MHz GSM : 880 to 960MHz DCS : 1710 to 1880MHz PCS : 1850 to 1990MHz Documents:GSM Antenna 850-1900MHz