All Products

SKU: SF-TOL-13831

This is a high-quality switching ‘wall wart’ AC to DC 5.1V 2,500mA USB Micro-B wall power supply manufactured specifically for projects that require a higher level of power. This compact USB AC charger is UL and CSA listed and incorporates a highly regulated output switching power design to as...

SKU: AF-798

Warning: This is a US-plug adapter and is not certified for use in Australia. Only purchase if you are using it outside Australia or with an appropriate plug adapter. A regulated 12V DC switching power adapter delivering up to 1000mA (1A). The slim profile fits into power strips without blocki...

SKU: AF-63

A compact 9V DC 1000mA regulated switching power adapter with a 5.5mm/2.1mm centre-positive barrel jack. The switching design keeps it small, lightweight, and efficient, while the regulated output delivers a steady 9V up to 1A of current draw. Accepts 100–240V AC input, making it suitable for wo...

SKU: AF-4536

A simple adapter that converts a standard 2.1 mm DC barrel jack into a USB-C plug, letting you power USB-C devices from common 5 V barrel-jack wall adapters. Plug it onto the end of your existing power supply and connect straight to a Raspberry Pi 4 or any USB-C device that runs on 5 V without US...

SKU: AF-501

This 5V 1A USB power supply provides clean, regulated power for microcontrollers, development boards, and USB-charged devices. It accepts 110–240V AC input and outputs via a USB Type-A port, so you simply plug in whatever USB cable your project needs. The supply is intentionally designed to outp...

SKU: ET-2444596

A 5 V 2 A micro-USB power supply with a fixed Australian plug, designed specifically for the Raspberry Pi. It features short-circuit and over-current protection, meets CEC Stage 2 efficiency requirements, and is safety approved for Australian use. Compatible with Raspberry Pi 3 Model B/B+, Pi 2,...

SKU: SF-TOL-19466 · MPN: TOL-19466

This USB wall adapter provides a compact mains power option for USB-powered devices, with an AC100-240V input range for use with suitable mains supplies.The adapter supports variable output ranges of 6V-6.5V/3A, 6.5V-9V/2A, and 9V-12V/1.5A. It is supplied with a USB to USB-C cable, helping it con...

SKU: DF-FIT0784

A DC 5.5×2.1mm female to USB Type-C male power adapter plug, allowing you to power USB-C devices from a DC barrel jack power supply. Useful for powering Raspberry Pi 4/5, LattePanda, and other USB-C-powered boards from existing DC supplies. Also available in a Micro-USB version. Specifications ...

SKU: AF-2727

This adapter cable converts a 5.5mm/2.1mm DC barrel jack power supply to a Micro USB plug, allowing you to power Micro USB devices from a standard barrel jack power adapter. The barrel jack end is centre-positive polarity. It works great for powering Arduinos, BeagleBones, Raspberry Pis, Android...

SKU: DF-FIT0783

A DC 5.5×2.1mm female to Micro-USB male power adapter plug, allowing you to power Micro-USB devices from a DC barrel jack power supply. Useful for powering Raspberry Pi, LattePanda, phones, and tablets from existing DC supplies. Specifications Input (Female) – DC 5.5×2.1 mm barrel jack Output...

SKU: AF-352

Warning: This power supply ships with a US/Canada/Japan plug. It is not certified for use in Australia. You can use a plug adapter or replace the cable with a standard figure-8 (IEC C7) cable. A high-capacity 12V 5A (60W) switching power supply for projects that need serious current. Accepts 1...

SKU: AF-4299

A compact adapter that converts a Micro-B USB cable to a USB-C plug. Simply attach it to the end of an existing Micro-B cable to connect to USB-C devices — no new cable required. Key Features Micro-B Socket to USB-C Plug – Converts existing Micro-B cables for use with USB-C devices Reversible...

SKU: DF-FIT0253

A 7.5 V DC wall adapter power supply with a DC 2.1 mm barrel connector, compatible with the Arduino power jack. The 7.5 V output is well suited for Arduino projects that need more than 5 V but where 12 V may be excessive — ideal for motor or servo applications that require a reliable mid-range vo...

SKU: DF-FIT0870

A USB to DC boost converter cable that steps up 5 V from a USB power source to either 9 V or 12 V output, selectable via a built-in switch. A digital LED display shows the current output voltage. Simply plug the USB end into a power bank, USB charger, or any 5 V USB source to power 9 V or 12 V de...

SKU: AF-2897

A simple adapter that sits inside a 5.5 / 2.5 mm DC barrel jack, allowing you to use a standard 5.5 / 2.1 mm barrel plug with it. Just insert the adapter into the device's 2.5 mm jack, then plug in your 2.1 mm power supply as normal. Key Features 2.5 mm to 2.1 mm Conversion – Adapts a 2.5 mm I...

SKU: AF-6265 · MPN: ADA6265

This USB C PD to 2.1mm Cable with Selectable Voltage Button will help you get the most out of your USB C Power Delivery wall warts by letting you select any of the available voltages to power a device that expects a 5.5mm outer diameter / 2.1mm inner diameter DC plug. Now you can get rid of all t...

SKU: PI-ADP011

A handy adapter that converts bare wire connections into a standard 2.1 mm DC barrel plug. Strip your battery pack or power supply wires, secure them in the screw terminals, and plug straight into any board or device with a 2.1 mm barrel jack input — no soldering required. Key Features 2.1 mm ...

SKU: SF-PRT-09518

A simple 9V battery clip cable with a 5.5 × 2.1 mm centre-positive barrel jack on the other end. Plug it onto a standard 9V battery and connect directly to any device with an onboard barrel jack — perfect for powering an Arduino Uno or other development board from battery. Key Features 9V Batt...

SKU: AF-5328

Turn any USB Type C device into a pluggable USB key with this 'plug to plug' adapter. Works with any computer/laptop with a USB type C port.If you want a small, cable-less way to connect our modern USB C devices, this little dongle will do the job nicely. It's quite simple - you've got your USB C...

SKU: LB-LR0296

A 9V battery clip adapter with a standard 5.5 × 2.1 mm centre-positive barrel jack. Use it to power any device that accepts 9V input through an onboard barrel jack connector. Key Features 9V Battery Snap – Standard clip fits all 9V batteries Barrel Jack Output – 5.5 × 2.1 mm centre-positive c...