All Products

SKU: AF-3527

The Adafruit PiOLED is a compact 128×32 monochrome OLED display that plugs directly onto your Raspberry Pi's GPIO header. At just 1 inch diagonal, it's the perfect status display for headless Pi projects — showing IP addresses, system stats, sensor readings, or custom graphics without needing a f...

SKU: SF-LCD-24606 · MPN: LCD-24606

The SparkFun Qwiic OLED Display is a compact 0.91″ (diagonal) monochrome OLED screen with 128 × 32 pixel resolution, capable of displaying up to four lines of text. As an OLED, it has no backlight layer — resulting in a thinner profile, lower power consumption, and higher contrast compared to LCD...

SKU: WS-25133

This 0.96″ RGB OLED Display Module features a 64×128 pixel resolution with 65K colours, delivering vivid and clear visuals from an OLED panel. Driven by the SSD1357 controller over SPI, it requires minimal I/O pins and comes with example code for Raspberry Pi, Arduino, and STM32 platforms. The m...

SKU: AF-4440

This compact 0.91" monochrome OLED display packs 128×32 individually controllable white pixels into a tiny, highly readable package. With no backlight needed, OLEDs deliver exceptional contrast and low power consumption — perfect for status displays, sensor readouts, and compact interfaces. The ...

SKU: WS-25587

The Waveshare OLED/LCD HAT (A) combines a 2-inch IPS LCD main screen with dual 0.96-inch blue OLED secondary screens on a single Raspberry Pi HAT. It's ideal for displaying system stats, status indicators, and small graphics across three separate screens simultaneously. The main LCD provides a 2...

SKU: AF-4741

The Adafruit Grayscale 1.5" OLED Display delivers 128×128 pixels with 16 levels of grayscale on a crisp, high-contrast OLED panel. Driven by the SSD1327 controller, it connects via I²C or SPI and includes STEMMA QT / Qwiic connectors for solderless I²C hookup. An on-board 3.3V regulator and 12V b...

SKU: SF-LCD-23453 · MPN: LCD-23453

The SparkFun Qwiic 1.3in OLED is a compact, easy-to-use display perfect for adding a visual element to your Arduino, Raspberry Pi, or other microcontroller projects. With a vibrant 1.3-inch OLED screen and a resolution of 128x64 pixels that deliver crisp white-on-black, it's ideal for displaying ...

SKU: WS-30953 · MPN: 30953

A 0.96″ white OLED display module designed to snap into the Argon ONE V5 case for Raspberry Pi. Once installed and configured, it displays real-time system information including CPU temperature, uptime, and IP address — useful for headless setups or quick status checks without connecting a monito...

SKU: AF-3531

The Adafruit 128×64 OLED Bonnet is a compact display add-on for Raspberry Pi, featuring a 1.3" diagonal monochrome OLED screen with a 5-way joystick and two pushbuttons. The high-contrast white OLED pixels are individually lit with no backlight required, delivering crisp, readable text and graphi...

SKU: DF-DFR1178 · MPN: DFR1178

The DFRobot 15.6" Portable 4K OLED Touch Display features a Samsung OLED panel with 3840×2160 resolution, delivering exceptional colour accuracy with 100% DCI-P3 and 100% Adobe RGB coverage. With 829 million self-luminous pixels, a 100,000:1 contrast ratio, and 550 nit peak brightness, it provide...

SKU: WS-13992

A 1.5-inch OLED display module with 128×128 pixel resolution and 16-level greyscale, driven by the SSD1327 controller. Communicates via SPI or I2C interface (selectable via onboard resistor), and operates at both 3.3V and 5V logic levels. With a wide viewing angle of over 160° and true OLED cont...

SKU: WS-24691

A compact 1.27-inch RGB OLED display module featuring 128×96 resolution and 262K colours for clear, vibrant visuals. Built around the SSD1351 driver chip with an SPI interface, it requires minimal IO pins and is straightforward to integrate into your projects. Waveshare provides online developme...

SKU: SF-LCD-24177 · MPN: LCD-24177

This compact white OLED gives microcontroller projects a crisp, high-contrast canvas in a very small footprint. With 128x32 pixels across a 0.91-inch diagonal, it is suited to status readouts, menus, sensor values and other small on-device displays.The module supports both 4-wire SPI and I2C inte...

SKU: WS-25742

A 2.42″ monochrome OLED display module from Waveshare with 128 × 64 resolution, driven by the SSD1309 controller. It supports both 4-wire SPI and I2C interfaces with an onboard voltage translator, and Waveshare provides example code for Raspberry Pi, Pico, Arduino, STM32, ESP32, and Jetson Nano. ...

SKU: WS-24777

A compact 1.32-inch OLED display module with 128×96 resolution and 16 levels of greyscale. The ultra-narrow bezel and onboard voltage translator make it easy to integrate into space-constrained projects. Built around the SSD1327 driver chip, it supports both 4-wire SPI and I2C interfaces for fle...

SKU: AF-5297

The Adafruit Monochrome 1.12" OLED Display packs a 128×128 pixel resolution into a compact screen with the high contrast and crisp readability that OLED technology is known for. Each of the 16,384 white pixels is individually addressable, producing sharp text and graphics with no backlight requir...

SKU: AF-4567

The Adafruit 2.23" Monochrome OLED Bonnet gives your Raspberry Pi a bright, high-contrast display that's easy to read from across the room. Simply plug this pre-assembled bonnet onto any Pi with a 2×20 header and start displaying sharp white text, graphics, and animations at up to 30 FPS. With 1...

SKU: AF-4650

The Adafruit FeatherWing OLED 128x64 adds a crisp 1.3-inch monochrome OLED display and three tactile user buttons (A, B, C) to any Feather board. The 128×64 white OLED pixel array is self-emissive — no backlight needed — delivering high contrast and excellent readability in a compact form factor....

SKU: DF-DFR0376

INTRODUCTION OCELL is a 0.5" micro OLED display designed for Arduino and other microcontrollers. This micro OLED display is small as the grown-up's fingernail- 0.5" only. It has 450cd/m^2 screen brightness with extremely high contrast and readability; moreover, it conta...

SKU: WS-25512

A 1.54-inch OLED display module with 128×64 resolution and white pixels on a black background. Built around the SSD1309 driver chip, it supports both 4-wire SPI and I2C interfaces and includes an onboard voltage translator for compatibility with both 3.3 V and 5 V microcontrollers. Waveshare pro...