All Products
Showing 1-20 of 60 products
MicroUSB Plug to 5.5/2.1mm DC Barrel Jack Adapter
5.5/2.1mm DC to Micro USB Adapter
MicroUSB to 5.5/2.1mm DC Barrel Jack Adapter
30 Piece 5.5 / 2.1mm to DC Barrel Jack Adapter Kit
Re-programmable USB Type-C PD to 2.1/5.5mm Barrel Jack Cable
Barrel Jack Adapter - USB to 5.5mm
5.5/2.1mm DC to Type-C Adapter
28 PCS Universal 5.5*2.1mm DC Adapter Kit
DC Barrel Jack Adapter - Female
DC Barrel Jack Adapter - Female
DC 5.5 x 2.1mm 1-to-3 Power Splitter Cable - 5 Pack
MPN: FIT0885
DC 5.5 x 2.1mm 1-to-4 Power Splitter Cable - 5 Pack
MPN: FIT0886
3.5 / 1.3mm or 3.8 / 1.1mm to 5.5 / 2.1mm DC Jack Adapter Cable
DC Barrel Jack Adapter - Male
9V to Barrel Jack Adapter
DC Barrel Jack Adapter - Male
DC Barrel Jack to 2-Pin Terminal Block Adapter
9V to Barrel Jack Adapter V2
2.1mm to 2.5mm DC Barrel Plug Adapter
2-Way 2.1mm DC Barrel Jack Splitter Squid
MicroUSB Plug to 5.5/2.1mm DC Barrel Jack Adapter
This adapter cable converts a 5.5mm/2.1mm DC barrel jack power supply to a Micro USB plug, allowing you to power Micro USB devices from a standard barrel jack power adapter. The barrel jack end is centre-positive polarity. It works great for powering Arduinos, BeagleBones, Raspberry Pis, Android...
5.5/2.1mm DC to Micro USB Adapter
A DC 5.5×2.1mm female to Micro-USB male power adapter plug, allowing you to power Micro-USB devices from a DC barrel jack power supply. Useful for powering Raspberry Pi, LattePanda, phones, and tablets from existing DC supplies. Specifications Input (Female) – DC 5.5×2.1 mm barrel jack Output...
MicroUSB to 5.5/2.1mm DC Barrel Jack Adapter
The premise of this MicroUSB to 5.5/2.1mm DC Barrel Jack Adapter is simple. There's a MicroUSB plug on one end and a 5.5mm/2.1mm DC barrel jack with center positive polarity on the other. This allows you to connect one of our 5V 2 Amp, 5V 4A or 5V 10 Amp adapters ...
30 Piece 5.5 / 2.1mm to DC Barrel Jack Adapter Kit
A comprehensive set of 30 barrel jack plug adapters that convert a standard 5.5mm / 2.1mm DC jack to a wide variety of other tip sizes. Perfect for powering devices that use non-standard barrel connectors from your existing DC power supplies, USB-C to DC cables, or battery packs. Each adapter pl...
Re-programmable USB Type-C PD to 2.1/5.5mm Barrel Jack Cable
A re-programmable USB Type-C Power Delivery (PD) cable that converts any PD-capable USB-C power adapter into a configurable DC barrel jack output. Programme the built-in PD sink negotiation chip to request 5 V, 7 V, 9 V, 10 V, 12 V, 15 V, or 20 V at up to 2 A — replacing the need for multiple wal...
Barrel Jack Adapter - USB to 5.5mm
A USB-A to 5.5 × 2.1 mm barrel jack adapter cable for powering development boards and small devices from any USB port. Centre-positive polarity, delivering up to 5 V at 500 mA (per USB specification). Specifications Input – USB-A male plug Output – 5.5 × 2.1 mm barrel jack, centre positive V...
5.5/2.1mm DC to Type-C Adapter
A DC 5.5×2.1mm female to USB Type-C male power adapter plug, allowing you to power USB-C devices from a DC barrel jack power supply. Useful for powering Raspberry Pi 4/5, LattePanda, and other USB-C-powered boards from existing DC supplies. Also available in a Micro-USB version. Specifications ...
28 PCS Universal 5.5*2.1mm DC Adapter Kit
A 28-piece universal DC adapter kit with 5.5 × 2.1mm female connectors converting to a variety of DC barrel jack sizes. Compatible with standard 2.5mm DC male plugs, this kit lets you power laptops, displays, stereos, and other devices when the original power connector doesn't match. Warning: T...
DC Barrel Jack Adapter - Female
A screw-terminal adapter that converts a 5.5 × 2.1 mm centre-positive DC barrel jack connection to bare wire terminals. Plug in a barrel jack power supply on one end and connect the screw terminals to a breadboard, circuit, or project on the other — a simple way to add a standard DC power input w...
DC Barrel Jack Adapter - Female
This adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm, center-positive female barrel jack. If you have a power supply with a barrel jack and want to plug it into a breadboard, this might be the simple solution.
DC 5.5 x 2.1mm 1-to-3 Power Splitter Cable - 5 Pack
· MPN: FIT0885
This DC power splitter cable lets a single DC 5.5 x 2.1 mm power source feed three compatible devices, making it a handy option for tidy multi-device power setups.It uses a tinned oxygen-free copper wire core for stable transmission and to help suppress external signal interference. The PVC outer...
DC 5.5 x 2.1mm 1-to-4 Power Splitter Cable - 5 Pack
· MPN: FIT0886
This DC power splitter cable lets you run four DC devices from a single power source. It has one DC 5.5 x 2.1mm female connector splitting out to four DC 5.5 x 2.1mm male connectors, making it handy for tidier low-voltage power distribution.The cable is compatible with DC5.5*2.1 connectors and us...
3.5 / 1.3mm or 3.8 / 1.1mm to 5.5 / 2.1mm DC Jack Adapter Cable
A DC barrel jack adapter cable that converts a 3.5/1.3 mm or 3.8/1.1 mm DC plug to the standard 5.5/2.1 mm DC barrel jack format. Internal spring contacts accommodate outer diameters from 3.5 mm to 3.8 mm, making it versatile across a range of small-barrel DC connectors. Key Features Wide Comp...
DC Barrel Jack Adapter - Male
This adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm, center-positive male barrel jack. If you need to connect bare wires to a barrel jack on an Arduino or a development board, this might be the simple solution.
9V to Barrel Jack Adapter
A simple 9V battery clip cable with a 5.5 × 2.1 mm centre-positive barrel jack on the other end. Plug it onto a standard 9V battery and connect directly to any device with an onboard barrel jack — perfect for powering an Arduino Uno or other development board from battery. Key Features 9V Batt...
DC Barrel Jack Adapter - Male
This adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm, center-positive male barrel jack. If you need to connect bare wires to a barrel jack on an Arduino or a development board, this might be the simple solution. Wi...
DC Barrel Jack to 2-Pin Terminal Block Adapter
This connector adapts a 5.5 × 2.1 mm DC barrel jack to a pair of screw terminals spaced approximately 5 mm (0.2″) apart. The terminals are labeled positive and negative, with the positive terminal connected to the center pin.
9V to Barrel Jack Adapter V2
The second version of the 9V to Barrel Jack Adapter, now featuring a hard plastic battery snap for easier connection and disconnection. Plug a 9V battery into one end and connect the other to any device with a 5.5 × 2.1 mm centre-positive barrel jack. Key Features Hard Plastic Snap (V2) – Easi...
2.1mm to 2.5mm DC Barrel Plug Adapter
A simple adapter that sits inside a 5.5 / 2.5 mm DC barrel jack, allowing you to use a standard 5.5 / 2.1 mm barrel plug with it. Just insert the adapter into the device's 2.5 mm jack, then plug in your 2.1 mm power supply as normal. Key Features 2.5 mm to 2.1 mm Conversion – Adapts a 2.5 mm I...
2-Way 2.1mm DC Barrel Jack Splitter Squid
A simple 2-way DC barrel jack splitter that lets you power two devices from a single power adapter. Plug in one standard 5.5mm/2.1mm DC barrel jack and get two identical outputs — perfect for powering multiple boards or accessories from a single supply. Key Features 1-to-2 Splitter – One DC ba...
