All Products
Showing 1-20 of 60 products
Analog Feedback Micro Servo - Plastic Gear
120:1 Plastic Gearmotor, 90º Output
120:1 Mini Plastic Gearmotor, Offset 3mm D-Shaft Output
200:1 Plastic Gearmotor, 90º Output
2.3KG Serial Bus Servo (6V)
Micro 360 Degree Continuous Rotation Servo FS90R
Bulk 9 Gram Servo - 10 pack
Mini Geared Pager Motor with Return Spring
Servo - Generic High Torque Continuous Rotation (Standard Size)
Servo - Generic Continuous Rotation (Micro Size)
MiniQ Discovery Robot Kit
Servo - Generic, 180° Rotation (Sub-Micro Size)
MPN: ROB-24052
Plastic Micro Servo Adapter for LEGO Cross - 16mm long
Otto Kit
Micro Servo 9g
Horizontal Micro Servo Mount for LEGO-Compatible Bricks
MPN: ADA6043
Vertical Micro Servo Mount for LEGO-Compatible Brick Systems
MPN: ADA6044
Arduino Compatible 9G Micro Servo Motor
9g 300° Clutch Servo
Servo - Generic (Sub-Micro Size)
Analog Feedback Micro Servo - Plastic Gear
A plastic-geared micro servo with an extra trick — a fourth wire brings out the internal potentiometer feedback signal, letting you read the servo's actual position via an analog input. This feedback capability enables motion recording, playback, and improved stability in robotics applications. ...
120:1 Plastic Gearmotor, 90º Output
A 120:1 plastic gearmotor with a 90° output shaft — the output is perpendicular to the motor axis, making it a compact choice for small robot designs where side-mounted wheels or mechanisms are needed. The enclosed gearbox and low-current brushed DC motor run on 3–12V, with a built-in safety clut...
120:1 Mini Plastic Gearmotor, Offset 3mm D-Shaft Output
A compact, inexpensive brushed DC motor with a 120:1 plastic reduction gearbox, well suited for small robot builds. The motor is rated for 4.5V but runs comfortably in the 3–6V range. The gearbox output shaft is a 3mm D-shape, offset from and parallel to the motor shaft. A built-in safety clutch ...
200:1 Plastic Gearmotor, 90º Output
A 200:1 plastic gearmotor with a 90-degree output shaft, offering a compact and affordable solution for small robot designs. The low-current brushed DC motor is well-suited for use with common motor drivers, and the recommended operating voltage range is 3–12V. The gearbox is fully enclosed and ...
2.3KG Serial Bus Servo (6V)
A miniature serial bus servo from DFRobot that delivers 2.3 kg·cm of stall torque at 6 V, controllable via TTL serial communication. Up to 253 servos can be daisy-chained in series, each assigned a unique ID for individual or synchronised control at baud rates up to 1 Mbps. The hybrid gear train...
Micro 360 Degree Continuous Rotation Servo FS90R
These continuous rotation servos are ideal when you need very precise degrees of rotation, to build a dial display for example. Dimensions: 23.2×12.5×22 mm Weight: 9g Operating speed: 110RPM (4.8V) / 130RPM (6V) Stall torque : 1.3kg.cm/18.09oz.in (4.8V) / 1.5kg.cm/20.86oz.in (6V...
Bulk 9 Gram Servo - 10 pack
A bulk pack of ten 9-gram micro servos — an affordable way to stock up for robotics, mechatronics, and RC projects. Each servo includes a ~25cm cable with a standard 3-pin female header, plus a full set of horn and screw accessories. These compact servos deliver 1.6 kg/cm of torque at 6.0V with ...
Mini Geared Pager Motor with Return Spring
These are very unusual motors, but we thought they could be handy for projects that need a small geared-down motor. At the core is a 'pager motor' - a small thin DC motor that runs on about 3VDC. That motor is then geared down inside the red-plastic body of the motor. Finally, the output axle is ...
Servo - Generic High Torque Continuous Rotation (Standard Size)
Here, for all your mechatronic needs, is a simple, high quality continuous continuous rotation servo motor. This servo is able to take in 6 volts and deliver 66.7 oz-in. of maximum torque at 70 r/min. A standard 3-pin power and control cable is attached and all hardware listed below is included...
Servo - Generic Continuous Rotation (Micro Size)
Here, for all your mechatronic needs, is a simple, high quality continuous rotation servo motor. This servo is able to take in 6 volts and deliver 30.6 oz-in. of maximum torque at 0.14 sec/60° A standard 3-pin power and control cable is attached and all hardware listed below is included. Featu...
MiniQ Discovery Robot Kit
The MiniQ Discovery Robot Kit is a 2WD mobile robot platform based on the MiniQ chassis and the Romeo V2 All-in-One Arduino-compatible controller. It comes with a Sharp GP2Y0A21 distance sensor and 9g micro servo pre-included, making it ready for obstacle avoidance and sensor-based navigation rig...
Servo - Generic, 180° Rotation (Sub-Micro Size)
·
Here is a simple, low-cost servo for all your mechatronic needs. This little guy is able to take in 6 volts and deliver 1.5kg/cm (at 6V). of maximum torque at 0.09 sec/60° (at 6V). This small servo comes with a standard 3 pin power and control cable, six arms and six screws. Note: This is the s...
Plastic Micro Servo Adapter for LEGO Cross - 16mm long
This plastic adapter connects a micro servo to LEGO-compatible cross axle parts such as gears, wheels, and beams. Simply push the adapter's spline housing onto the shaft of a compatible micro servo, and the other end accepts a standard LEGO cross axle — bridging the gap between hobby servos and b...
Otto Kit
Build a functional, interactive Otto-style robot with a bundled set of electronics for sensing, movement, control and power. This kit is designed to help you assemble a robot that can detect objects in its path and move using compact servo motors.An ultrasonic distance sensor lets the robot sense...
Micro Servo 9g
This compact 9 g micro servo is an affordable, simple actuator for small mechatronics projects, robot linkages and model mechanisms. It can operate from 3.0 V to 7.2 V, with the supplied feature ratings listed at 6.0 V where noted.A 3-wire cable provides ground, power and control, terminated in a...
Horizontal Micro Servo Mount for LEGO-Compatible Bricks
·
Add motion to a LEGO-compatible brick build without reaching for hot glue, epoxy or crossed fingers. This resin-printed mounting piece is designed to hold an Adafruit '9g' micro servo or a micro-servo-sized DC motor securely in a horizontal orientation.The mount has LEGO-compatible dots on the bo...
Vertical Micro Servo Mount for LEGO-Compatible Brick Systems
·
Add motion to LEGO-compatible brick builds without relying on hot glue, epoxy or guesswork. This resin-printed mounting piece is designed to hold Adafruit '9g' micro servos and micro-servo-sized DC motors securely for robotics and mechanical projects.The mount has a vertical servo orientation wit...
Arduino Compatible 9G Micro Servo Motor
A compact 9g micro servo motor ideal for small robotics, pan-and-tilt mechanisms, and Arduino projects. With 1.6 kg·cm of torque and a fast 500°/sec speed, it's well-suited for lightweight applications where space is limited. The servo connects directly to an Arduino digital pin and is controlle...
9g 300° Clutch Servo
A 9g micro servo with 300° rotation and a built-in clutch mechanism that protects the servo from damage when external forces are applied. If the servo angle is changed by an external force during operation, the clutch allows it to automatically reset and continue working without stripping gears o...
Servo - Generic (Sub-Micro Size)
Here is a simple, low-cost, high quality servo for all your mechatronic needs. This servo is very similar in size and specifications to the Hitec HS-55. This little guy is able to take in 6 volts and deliver 20.8 oz-in. of maximum torque at 0.10 sec/60° This small servo comes with a standard 3 ...
