All Products

SKU: AF-2442 · MPN: 2442

Need to make a tiny robot? This little micro servo rotates 360 degrees fully forward or backwards, instead of moving to a single position. You can use any servo code, hardware or library to control these servos. Good for making simple moving robots. Comes with five horns and attachment screw...

SKU: AF-4326 · MPN: 4326

This tiny little servo can rotate approximately 180 degrees (90 in each direction), and works just like the standard kinds you're used to but smaller. You can use any servo code, hardware or library to control these servos. Good for beginners who want to make stuff move without building a motor c...

SKU: AF-5592 · MPN: 5592

This servo is just like our classic Micro Servo but has 3 alligator clip test leads at the end! This makes it perfect for plug-and-play support with any of our boards with alligator-clip-friendly input/output pins, like the Circuit Playground Express, Clue, and micro:bit! So you can just 'gator r...

SKU: AF-169 · MPN: 169

Tiny little servo can rotate approximately 180 degrees (90 in each direction), and works just like the standard kinds you're used to but smaller. You can use any servo code, hardware or library to control these servos. Good for beginners who want to make stuff move without building a motor contro...

SKU: AF-2201 · MPN: 2201

This is just about the cutest, tiniest little micro servo we could find, even smaller than the 9 gram micro servos we love so much.  It can rotate approximately 180 degrees (90 in each direction) and works just like the standard kind you're used to but much smaller.  You can use an...

SKU: AF-1143 · MPN: 1143

Add more power to your robot with this metal-geared MG90S servo. The tiny little servo can rotate approximately 90 degrees (45 in each direction), and works just like the standard kinds you're used to but smaller. You can use any servo code, hardware or library to control these servos. Good for b...

SKU: DF-SER0043

INTRODUCTION The TowerPro SG90C is a 360 degree micro servo. It uses a plastic gear drive and is light and compact. It can be used for various applications and DIY products, such as toy cars, boats, windmills etc. A 360 degree servo's operation is more similar to a DC motor than a standard s...

SKU: DF-SER0037

An ultra-compact 2.5g micro servo with 360-degree continuous rotation, ideal for micro robots and space-constrained projects. The coreless motor and POM gears deliver smooth, reliable rotation in a tiny form factor measuring just 19.6 × 8.0 × 16.3mm. Controlled via standard PWM servo signals, it...

SKU: PI-COM0812

These continuous rotation servos are ideal when you need very precise degrees of rotation, to build a dial display for example.  Dimensions: 23.2×12.5×22 mm Weight: 9g Operating speed: 110RPM (4.8V) / 130RPM (6V) Stall torque : 1.3kg.cm/18.09oz.in (4.8V) / 1.5kg.cm/20.86oz.in (6V...

SKU: AF-4250 · MPN: 4250

If you bought a servo from us you probably got a bunch of plastic add-ons that you can snap onto the rotating part of the servo. These are called 'servo horns'. For many robotics projects you'll end up drilling or gluing to the horns to attach it to your armatures. But maybe you messed up, or you...

SKU: AF-6480 · MPN: ADA6480

This machined aluminium servo arm is a tougher, longer-lasting upgrade from the standard plastic servo horns commonly supplied with hobby servos. The red anodised finish looks neat in robotics, animatronics and mechanical builds while adding strength where plastic horns can flex or wear.The arm i...

SKU: DF-DFR0429

INTRODUCTION An ordinary DC motor requires an H Bridge to work with a microcontroller such as an UNO. For newcomers to electronics, the process of finding the right motor driver, connecting it to the MCU and learning the relevant electronic theory can be confusing an...

SKU: DF-DFR0430

INTRODUCTION An ordinary DC motor requires an H Bridge to work with a microcontroller such as an UNO. For newcomers to electronics, the process of finding the right motor driver, connecting it to the MCU and learning the relevant electronic theory can be confusing and frustrating when you ju...

SKU: DF-ROB0117

The Cherokey 4WD Basic Arduino Robot Kit is a perfect wheeled robot platform to build your own robot and to get started with Arduino Robot. With just a few simple steps of assembling the hardware and tuning the software, and you'll learn all about Arduino, robotics, sensors, bluetooth comm...

SKU: LB-LR0259

This compact 9 g micro servo is an affordable, simple actuator for small mechatronics projects, robot linkages and model mechanisms. It can operate from 3.0 V to 7.2 V, with the supplied feature ratings listed at 6.0 V where noted.A 3-wire cable provides ground, power and control, terminated in a...

SKU: DF-ROB0182

This Raspberry Pi robotic arm will definitely lead you to a wonderful robot programming world! Based on a Raspberry Pi microprocessor and built-in Ubuntu system, this small but powerful Raspberry Pi Six-axis Robotic Arm comes with a working range of 280mm and supports multi-platform secondary dev...

SKU: DF-ROB0182-1

This kit includes Six-axis Robotic Arm (Based on a Raspberry Pi) and Flat Base. If you need G-Shape Base, please click the image of Kit 2.Introduction of Robotic ArmThis robotic arm will definitely lead you to a wonderful robot programming world! Based on a Raspberry Pi microprocessor and built-i...

SKU: AF-6043 · MPN: ADA6043

Add motion to a LEGO-compatible brick build without reaching for hot glue, epoxy or crossed fingers. This resin-printed mounting piece is designed to hold an Adafruit '9g' micro servo or a micro-servo-sized DC motor securely in a horizontal orientation.The mount has LEGO-compatible dots on the bo...

SKU: AF-6044 · MPN: ADA6044

Add motion to LEGO-compatible brick builds without relying on hot glue, epoxy or guesswork. This resin-printed mounting piece is designed to hold Adafruit '9g' micro servos and micro-servo-sized DC motors securely for robotics and mechanical projects.The mount has a vertical servo orientation wit...

SKU: DF-SER0006

A lightweight 9g micro servo with 1.6 kgf·cm of torque at 4.8V. Ideal for small-scale robotics, beam robots, and automation tasks where a compact, affordable servo is needed. At only 9 grams, it fits into tight spaces while providing reliable performance. Specifications Operating Voltage – 4.8...