All Products

SKU: EDU-MBCP-30 · MPN: EDU-MBCP-30

Everything a teacher needs for a one-micro:bit-per-student classroom: 30× BBC micro:bit v2 boards, 30× colour-coded USB cables, 30× AAA battery holders, and 30× protective cases — ready to hand out, plug in, and code. Ideal for primary and secondary Digital Technologies, Design & Technologies, a...

SKU: LB-MICROCLASS

DescriptionThe micro:bit Classroom Lab Pack includes 10 micro:bit boards and everything you need to get you started with the new learning platform. The Lab Pack has everything you need, including micro:bits, cables, battery packs and a few parts to experiment with. This package provides an easy w...

SKU: AF-4035

A 7 cm diameter clear ornament shell designed to house a micro:bit and battery pack for creating interactive, programmable decorations. Perfect for holiday ornaments, classroom projects, or creative coding activities — use the micro:bit's LED display, motion sensors, and temperature sensor to bri...

SKU: EF-EF03435

An accessory pack for the ElecFreaks Ring:bit Car V2, adding obstacle avoidance, line-following, and colourful LED lighting to your micro:bit-powered car. The kit includes three modules that plug directly into the Ring:bit Car for expanded functionality. What's Included Sonar:bit (Ultrasonic S...

SKU: LB-BULK-MICRO

A bulk pack of 300 BBC micro:bit V2.2 boards, ideal for schools, makerspaces, and institutions rolling out coding and STEM programmes at scale. Each micro:bit is individually packaged for easy distribution in classrooms and workshops. The micro:bit V2.2 features a built-in speaker, microphone, c...

SKU: EF-EF11085

A clear battery holder designed for the BBC micro:bit, holding two AAA batteries. Features a built-in on/off switch and a PH2.0 connector that plugs directly into the micro:bit's battery port. The transparent casing lets you see the batteries inside. Specifications Battery Type – 2× AAA (not i...

SKU: LB-COCKATOO-V2

The Cockatoo v2 is a simple breakout board for the BBC micro:bit, designed for school projects involving basic lighting circuits. Slide the micro:bit into the edge connector and access three pins — Pin 2, 3.3 V, and GND — for quick, solderless connections to LEDs and other simple components. Key...

SKU: EF-EF04034

The Octopus Digital Push Button Brick is a simple momentary button module from ElecFreaks' Octopus series. It connects to Arduino, micro:bit, and other microcontroller boards via a 3-pin buckled connector — no breadboard or soldering required. This blue version features a large button cap for ea...

SKU: WS-14513

An edge connector expansion board for the BBC micro:bit that breaks out all I/O pins to standard 2.54mm pitch pin headers for easy breadboard and jumper wire connections. Key Features Full Pin Breakout – All micro:bit I/O pins broken out to 2.54mm headers Edge Connector – Simply slide in the ...

SKU: ET-MBIT-WEARIT

The micro:bit wear:it kit turns your BBC micro:bit into a wearable device. The specially designed enclosure supports mobile applications and can be attached to your wrist, belt, keys, or worn on a lanyard — perfect for fitness trackers, step counters, digital accessories, and creative wearable pr...

SKU: YH-6000300953

A protective silicone case designed for the BBC micro:bit, compatible with both V1.5 and V2 boards. Precision-cut openings provide full access to the 5×5 LED matrix, A/B buttons, edge connector pins, and all V2 features including the speaker, touch logo, and microphone. The soft silicone constru...

SKU: EF-EF04013

The Octopus Crash Sensor Brick is a simple collision detection module based on a momentary crash switch. When physical contact is made, the switch triggers a digital signal — making it ideal for bump detection in robotics, limit switches in CNC or 3D printer projects, and basic button input. Par...

SKU: DF-DFR0785

A pack of five LED-illuminated push buttons in the DFRobot Gravity format. Each button lights up a different colour (red, yellow, green, blue, and white) when pressed, providing clear visual feedback. The digital output goes HIGH when pressed and LOW when released, making them simple to read with...

SKU: KI-5641

Take your micro:bit robotics builds to the next level with the Kitronik All-in-one Robotics Board. This all-in-one control solution lets the BBC micro:bit drive up to 4 motors (or 2 stepper motors) and 8 servos, making it the perfect foundation for a wide variety of robotics projects. The board ...

SKU: LB-00191-20

A classroom-ready bulk pack of 20 BBC micro:bit v2.2 boards. Each micro:bit features a built-in speaker, microphone, touch sensor, accelerometer, compass, Bluetooth, and a 5×5 LED matrix — everything students need to start coding and creating interactive projects. Board-only packaging (no retail...

SKU: EF-EF10095

A 2×AA battery holder designed specifically for the BBC micro:bit. The built-in JST PH connector plugs directly into the micro:bit's battery socket, and the integrated on/off switch with a secure cover provides safe, convenient power control. Key Features micro:bit Compatible – JST PH connecto...

SKU: KI-5609 · MPN: 5609

The Kitronik Prototyping System for the BBC micro:bit provides a ready-made platform for building circuits and experimenting with external components — no soldering required. It combines a pre-built edge connector breakout board with a breadboard and mounting plate, giving you full access to all ...

SKU: KI-2271

A compact 2×AAA battery cage with a JST PH connector and 145 mm colour-coded leads. Designed to plug directly into the BBC micro:bit's battery socket, providing a portable power source for classroom projects and wearable builds. Key Features JST PH Connector – Plugs directly into the micro:bit...

SKU: EF-11098

This compact DC micro submersible pump from ElecFreaks operates at 3V, making it easy to integrate into microcontroller-based projects. It comes equipped with male and female Dupont connectors for quick and simple wiring. The vertical design makes it well-suited for fountain projects, water circ...

SKU: AF-4192

A slim, open-top 2×AAA battery holder with a genuine JST PH connector. Two AAA batteries in series provide approximately 3V — ideal for powering low-voltage electronics projects, microcontrollers, and boards with JST PH battery inputs. The JST PH connector polarity matches Adafruit's Li-Ion/LiPo...