All Products

SKU: PL-312

A set of 140 pre-cut, pre-stripped solid-core jumper wires for breadboarding. The kit includes 10 wires in each of 14 different lengths, stored in a compact transparent plastic case with 5 compartments for easy organisation. Having the right wire length for each connection keeps your breadboard ...

SKU: SF-PRT-00124

This is a time saving kit of jumper wires - cut, stripped, and pre-bent for your prototyping pleasure. Included with this kit are 14 various lengths of 22AWG wire - 2, 5, 7, 10, 12, 15, 17, 20, 22, 25, 50, 75, 100, and 125mm - 10 pieces of each.

SKU: SF-PRT-14671

You asked for more wires, so you are going to get more wires! This is a large kit of jumper wires - cut, stripped, and pre-bent for your prototyping pleasure. Included with this kit are 14 various lengths of 22AWG wire - 2, 5, 7, 10, 12, 15, 17, 20, 22, 25, 50, 75, 100, and 125mm - 50 pieces o...

SKU: LB-LS2238

This 520-piece connector kit contains everything you need to make custom 2.54mm (0.1″) Dupont-style jumper wires and harnesses. It includes a comprehensive selection of single-row and dual-row housings from 1-pin to 2×8-pin, along with male and female crimp pins, pin headers, and a 10-wire rainbo...

SKU: DF-FIT0122

This is a time saving kit of jumper wires - cut, stripped,bent 90 degree on both ends for easy insertion and your prototyping pleasure.Make your prototyping neat and looks nicer, The box included with this kit are 14 various lengths of 22AWG wire - 2, 5, 7, 10, 12, 15, 17, 20, 22, 25, 50, ...

SKU: SF-PRT-09194

A mixed pack of 100 premium jumper wires in assorted colours, ideal for breadboard prototyping and connecting to 0.1″ headers. The pack includes 50 male-to-male and 50 female-to-female wires, each 155 mm (6″) long. The slim connector housings allow multiple jumpers to be installed side by side o...

SKU: DF-FIT0753 · MPN: FIT0753

This micro-diameter red hookup wire is made for compact electronics assembly, PCB rework and other wiring jobs where ordinary hookup wire is too bulky. Its 0.4mm outer diameter makes it easy to route through tight spaces in miniature electronics, wearable hardware and delicate circuit board modif...

SKU: LB-00162

A 40-pin ribbon of female-to-female (F/F) jumper wires, 15cm long, in ten rainbow colours (4 wires per colour). The wires fit standard 0.1″ (2.54mm) pitch headers and can be kept as a ribbon for neat harnesses or separated into individual jumpers. Key Features Female-to-Female (F/F) – 0.1″ fem...

SKU: LB-00160

A 40-pin ribbon of male-to-male (M/M) jumper wires, 15cm long, in ten rainbow colours. The wires fit standard 0.1″ (2.54mm) pitch headers and can be kept as a ribbon for neat harnesses or separated into individual jumpers. Key Features Male-to-Male (M/M) – 0.1″ male header pins on both ends 4...

SKU: SF-PRT-17993 · MPN: PRT-17993

These premium jumper wires are a simple, dependable way to connect projects on a breadboard or 0.1in pitch prototyping board. Each wire uses flexible stranded core wire with a solid male pin connector on both ends, so it can plug directly into breadboards and female pin headers.This 3 pack includ...

SKU: SS-110990032

A pack of 50 individual jumper wires, each 100 mm long with female connectors on both ends (female-to-female). These single-pin wires are ideal for making point-to-point connections on breadboards, between header pins, and with development boards. Key Features Connector Type – Female-to-female...

SKU: PI-JW-001

A selection of 140 solid-core jumper wires in fourteen colour-coded lengths, ideal for breadboard prototyping. Each wire has pre-stripped ends ready for immediate use, and the set comes in a compact storage box for easy organisation. Key Features 140 Jumper Wires – Generous quantity for comple...

SKU: AF-4028

Get started with CircuitPython using this all-in-one starter kit built around the Adafruit ItsyBitsy M4 Express. The ItsyBitsy M4 packs a 120 MHz ATSAMD51 Cortex M4 processor with floating point support, 512 KB flash, and 192 KB RAM into a compact, breadboard-friendly form factor — more than enou...

SKU: DF-FIT0752 · MPN: FIT0752

This fine-diameter wiring is made for precision soldering, compact circuit assemblies and high-temperature electronics work. With a slim 0.4mm outer diameter, it is well suited to routing through dense PCB layouts, flying leads and small embedded hardware.The conductor is made from seven 0.08mm s...

SKU: LB-LS2575

A 100-piece prototyping kit with everything you need to take a breadboard project to a soldered prototype. Includes a selection of PCBs in four sizes, straight and right-angle headers, female headers, screw terminal blocks, and jumper caps — all organised in a plastic storage box. Key Features ...

SKU: LB-SOLAR-M

A compact micro solar panel rated at 1.5 V and 400 mA (0.65 W peak), fitted with pre-soldered male jumper wires for direct breadboard use. Its small 80×60 mm form factor makes it easy to integrate into DIY solar projects and prototyping setups. Key Features 1.5 V / 400 mA Output – 0.65 W peak ...

SKU: LB-LR0178-350

SKU: KI-5609 · MPN: 5609

The Kitronik Prototyping System for the BBC micro:bit provides a ready-made platform for building circuits and experimenting with external components — no soldering required. It combines a pre-built edge connector breakout board with a breadboard and mounting plate, giving you full access to all ...

SKU: LB-00183

A 10-wire splittable ribbon jumper cable with male (pin) connectors on both ends. Each wire is colour-coded and can be peeled apart individually or in groups to suit your wiring needs. At 300mm (30cm) long, they're a good length for breadboard and prototyping work. Key Features Male-to-Male (M...

SKU: LB-00184

A 10-wire splittable ribbon jumper cable with a male (pin) connector on one end and a female (socket) connector on the other. Each wire is colour-coded and can be peeled apart individually or in groups to suit your wiring needs. At 300mm (30cm) long, they're a good length for breadboard and proto...