All Products
Showing 1-20 of 60 products
TLV320DAC3100 I2S DAC with Headphone & Speaker Out
·
Add high-quality amplified I2S digital audio to your project with this TLV320DAC3100 breakout. It provides clean stereo audio for 16Ω headphones and/or mono speaker output for a 4Ω-8Ω speaker, making it handy for compact audio builds without a separate amplifier.The board takes BCLK, WSEL and DIN...
Adafruit I2S Stereo Decoder - UDA1334A Breakout
The Adafruit UDA1334A I2S Stereo DAC Breakout converts digital I2S audio into clean stereo analogue line-level output. Built around the NXP UDA1334A, this versatile DAC supports 3.3V and 5V logic levels and works with MCLK-less interfaces like the Raspberry Pi — a built-in PLL generates the maste...
WM8960 Audio Codec Breakout with Headers (Qwiic)
·
This WM8960 breakout is a low-power stereo audio codec board for adding audio input and output to digital projects. The WM8960 works as both a stereo audio ADC and DAC, using I2S for audio data while allowing settings such as I2S configuration and analogue audio routing to be controlled over I2C....
Adafruit PCM5100 I2S DAC with Line Level Output - 100dB SNR
·
The Adafruit PCM5100 I2S DAC converts digital I2S audio into clean, high-quality stereo line-level output through a 3.5mm jack. With 100dB signal-to-noise ratio and no MCLK or I2C configuration required, simply pipe I2S data in and get great-sounding analogue audio out. The PCM5100 accepts 16, 2...
Adafruit PCM5102 I2S DAC with Line Level Output - 112dB SNR
·
The Adafruit PCM5102 I2S DAC converts digital I2S audio into excellent stereo line-level output through a 3.5mm jack. With an impressive 112dB signal-to-noise ratio and no MCLK or I2C configuration required, simply pipe I2S data in and get audiophile-grade analogue audio out. The PCM5102 accepts...
Pi-DAC PRO
Pi-DAC PRO, a new breed of audiophile DAC for the Raspberry Pi. With Phono (RCA), Heaphone (3.5mm) and support for Balanced / Differential output (for XLR use in Studio, or home studio), complete with PCB spacers and screws The Pi-DAC PRO plugs directly on the Raspberry Pi A+/B+/2/3, there’s n...
Pi-DAC+
The IQaudIO Pi-DAC+ audio card for the Raspberry Pi delivers outstanding sonic performance and full-HDaudio capability with build-in hardware volume control. The Pi-DAC+ also includes a high quality audiophile headphone amp. The Pi-DAC+ is a fully compliant Raspberry Pi HAT (A+/B+/2) boar...
Audio Adapter Board for Teensy 3.0 - 3.2, 3.5 and 3.6
This audio adapter lets you easily add high quality 16 bit, 44.1 kHz sample rate (CD quality) audio to your projects with a Teensy 3.2, 3.5 or 3.6. It supports stereo headphone and stereo line-level output, and also stereo line-level input or mono microphone input.The audio chip connects to Te...
Adafruit PCM5122 I2S DAC with Line Level Output - HW, I2C or SPI
·
The Adafruit PCM5122 I2S DAC delivers excellent stereo line-level audio with 112dB SNR and -93dB THD. Out of the box it works in hardware mode — just pipe I2S audio in with no MCLK or configuration needed. For advanced control, switch to I2C or SPI mode to access software volume, EQ, filtering, a...
Audio Stereo Decoder Module Board 3.3V - 5V
HS1891 DAC Module CJMCU-1334 UDA1334A I2S DAC Audio Stereo Decoder Module Board 3.3V - 5V Feature: This fully-featured UDA1334A I2S Stereo DAC breakout is a perfect match for any I2S-output audio interface. 3.3V - 5V logic levels and can process multiple different formats by setting tw...
DA7212 I2S Audio Board For Raspberry Pi, Stereo Encoding/Decoding, Onboard Dual Microphones
DA7212 I2S Audio Boardfor Raspberry Pi Supports stereo encoding/decoding and rich audio processing functions Designed for the Raspberry Pi 40-pin GPIO header, this module is fully compatible with Raspberry Pi series boards. It features the high-quality DA7212 stereo DAC, controlled via I2C, with ...
Pimoroni Pico DV Demo Base
A demo board for exploring the digital video and audio capabilities of Raspberry Pi Pico, with HDMI connector, SD card slot, line level I2S audio and buttons. Intrigued by the possibilities of VGA Demo Base but no longer own a D-sub cable? No problem! This board is an all-digital conversion of Ra...
pHAT DAC
If music be the food of love, play on. But make sure you use this super little DAC to get the best out of your Raspberry Pi audio! This pHAT provides a super affordable high-quality DAC for your Raspberry Pi. It pumps out 24-bits at 192KHz from the Raspberry Pi's I2S interface on its...
pHAT DAC
If music be the food of love, play on. But make sure you use this super little DAC to get the best out of your Raspberry Pi audio! This pHAT provides a super affordable high-quality DAC for your Raspberry Pi. It pumps out 24-bits at 192KHz from the Raspberry Pi's I2S interface on its 2x20 pin ...
Pirate Audio: Line-out for Raspberry Pi
Plug Pirate Audio Line-out for Raspberry Pi into your hi-fi amp or powered speakers, then sit back, relax, and soak in the rich, digital audio. It has a high-quality I2S DAC, high-res colour display, and playback control buttons. This board is perfect for upg...
Pirate Audio: Headphone Amp for Raspberry Pi
The ultimate hackable headphone amp for your desk! Pirate Audio Headphone Amp for Raspberry Pi has an I2S DAC, headphone amplifier, high-res display, and playback control buttons.Build your own home-brew iPod Nano with Pirate Audio Headphone Amp! It's an all-in-one s...
HIFI DAC Audio Sound Card Module I2S interface for Raspberry Pi
A high-fidelity DAC expansion board for Raspberry Pi that delivers superior audio quality over the Pi's built-in 3.5mm output. Built around Texas Instruments' PCM5122 DAC chip, this board connects via the I2S interface and supports up to 384kHz sampling with 112dB dynamic range — ideal for buildi...
Teensy PT8211 Audio Kit
·
Add 16-bit stereo audio output to a Teensy project with this DIY audio adapter kit built around the PT8211 digital-to-analogue converter (DAC). It is designed as a clean, high-fidelity sound source for audio-based builds using the Teensy Audio Library.The adapter provides a true stereo, line-leve...
pHAT BEAT
The pHAT BEAT is a stereo audio add-on for the Raspberry Pi featuring dual I2S DAC/amplifiers, 16 RGB LEDs, and six tactile buttons. It delivers high-quality, amplified digital audio through two channels at up to 3W per speaker. The dual rows of eight APA102 RGB LEDs work beautifully as a VU met...
Gravity: I2C Voice Recorder Module EDU
Gravity: I2C Voice Recorder Module EDU is DFRobot all-in-one voice interaction module, which integrates recording and playback functions into one. It can record with one button, and also supports Gravity: I2C interface for recording and playback by microcontroller. And support number synthesis re...
