All Products

SKU: SF-TOL-09200

It’s like an Xacto knife, only better. We use these extensively when working with PCBs. These small knives work well for cutting traces, scraping ground pours, and guiding hair-like wires into their proper place. Excel knife comes with aluminum handle, one ultra-sharp blade, and safety cap.

SKU: LB-LS0845

You can never find a knife when you need one!    We use these when working with PCBs , cardboard and paper craft.These small knives work well for cutting traces, scraping ground pours, and guiding hair-like wires into their proper place. Excel knife comes with aluminum handle, three ult...

SKU: SF-CAB-17854 · MPN: CAB-17854

Securely link compatible modules with this short adapter cable, fitted with a 4-pin locking JST-GHR connector on one end and a 6-pin locking JST-GHR connector on the other.Both connectors use a 1.25 mm pitch and are suited to hardware that may see movement or vibration, such as sensors and teleme...

SKU: SF-SEN-24409 · MPN: SEN-24409

This compact breakout board measures moisture in soil and similar materials using two large exposed pads as conductivity probes. As the soil gets wetter, conductivity between the pads increases, resistance drops, and the sensor produces a higher analog SIG output.For quick setup, the board includ...

SKU: AF-346

These LED strips are fun and glowy. There are 60 RGB LEDs per meter - twice as many as our other strip, and you can control the entire strip at once with any microcontroller and three transistors. The way they are wired, you will need a 9-12VDC power supply and then ground the R/G/B pins to tu...

SKU: AF-285

This weatherproof RGB LED flexi-strip features 30 LEDs per metre on a white PCB backing with a silicone weatherproof coating and 3M adhesive on the reverse. The entire strip is controlled as one unit — drive the R, G, and B channels with a microcontroller and three N-channel MOSFETs (or NPN trans...

SKU: SF-PRT-11363

A set of three common gauges of enameled magnet wire for winding transformers, chokes, motors, and electromagnet experiments. The thin enamel coating insulates each wire, allowing tight coil windings without short circuits. Includes 22, 26, and 30 AWG spools — giving you the right gauge for a ra...