All Products

SKU: SF-COM-08914

These are small rare earth magnets - 3/16" rings. Composed of Neodymium/Iron/Boron (NdFeB), these magnets are curiously strong and make for a great way to attach tools to a metal workbench, hold small children to a fridge, and as a trigger for reed switches. This one small ring can easily hold a ...

SKU: AF-1170

These magnetic pin backs let you attach e-textile projects, badges, and small circuits to clothing without poking holes. The two-piece design uses a metal bar with an adhesive strip and a plastic backing with two strong rare-earth (neodymium) magnets — powerful enough to hold even heavier circuit...

SKU: SF-COM-08643

These are small rare earth magnets - 0.25" cubed. Composed of Neodymium/Iron/Boron (NdFeB), these magnets are curiously strong and make for a great way to attach tools to a metal workbench, hold small children to a fridge, and as a trigger for reed switches. Activates the reed switch (shown belo...

SKU: SF-COM-08644

These are very small rare earth magnets - 0.125" cubed. Composed of Neodymium/Iron/Boron (NdFeB), these magnets are curiously strong and make for a great way to attach tools to a metal workbench, hold small children to a fridge, and as a trigger for reed switches. Don’t let the photo fool you - t...

SKU: AF-9

Yow! These things are super powerful. 1/2" diameter, 3/16" thick discs, south side is marked with a red line. Great for use with your SpokePOV Kit. If you have an aluminium frame, use tape/foamstickytape to attach it.

SKU: SF-WRL-17732 · MPN: WRL-17732

The Taoglas Steedan MA350 is a low-profile 5-in-1 combination antenna designed for vehicle roofs, outdoor buildings and heavy equipment where drilling through a roof or metal panel is not feasible. Its magnetic base mounts to steel surfaces using ultra-strong neodymium magnets, while a soft foam ...

SKU: AF-6490 · MPN: ADA6490

This breakout carries the TMAG5273 A2, a low-power linear 3D Hall-effect sensor for measuring magnetic fields across the X, Y and Z axes. Its built-in 12-bit ADC provides axis readings over I2C, and there is also an integrated thermometer for basic temperature measurement.The sensor includes an a...

SKU: AF-5579

The Adafruit MMC5603 is a triple-axis magnetometer (compass) breakout with a wide ±30 gauss (±3000 µT) measurement range and full 20-bit output resolution at up to 1000 Hz. It's sensitive enough to detect Earth's magnetic field (which maxes at about 0.6 gauss), making it well-suited for compass a...

SKU: DF-FIT0537

This compact magnetic stirrer uses a rotating Nd-Fe-B magnet to spin a stir bar immersed in liquid, providing quiet, vibration-free mixing at speeds up to 3,000 RPM. The 316 stainless steel working surface handles volumes up to 3,000 mL, and the slim 45 mm profile keeps your bench tidy. Powered ...

SKU: ED-6968285823022 · MPN: MK-DC

This DC motor is designed for use with air:bit projects, giving you a compact motor option for builds that need powered rotation.It uses neodymium magnets and the cable colour identifies the rotation direction: red/blue is clockwise, while white/black is counter-clockwise.Features:Powerful DC mot...

SKU: SF-ROB-12629

The DAGU Wheel Encoder Kit is a simple add-on for wheeled robots that measures speed and distance travelled. Each kit includes two neodymium 8-pole magnets with rubber hubs and two hall-effect sensors, providing reliable rotational feedback for odometry and motion control. The sensors come pre-t...

SKU: PI-SUGRU-003

Attach anything to anything with magnets + Sugru! This kit turns you into a product designer in your own home. By simply attaching magnets, you'll make so many things in your life easier to use. What's inside: Three 5g single-use packs of Pitch Black Sugru Four bespoke neodymium magnets One&nbsp...

SKU: SF-SEN-25531

The FGM-X series of devices are very high sensitivity magnetic field sensors operating in the ±50 microtesla range ( ±0.5 oersted). They are simple, essentially three terminal devices, operating from a single +5 volt supply, the connections being ground, +5v and output. The output is a robust 5 v...

SKU: AF-5470

This DIY magnetic connector pair lets you add snap-together magnetic connections to your own projects. Featuring nine spring-loaded pogo pins at 2.2 mm pitch with a straight PCB-mount orientation, the two halves attract magnetically to form a secure, aligned connection — and repel if you try to c...

SKU: AF-5468

These DIY magnetic connectors let you add MagSafe-style snap-together connections to your own projects. Each set includes two matching halves with seven spring-loaded pogo pins at 2.2 mm pitch and embedded magnets that self-align and attract when oriented correctly — and repel if you try to conne...

SKU: WS-25780

Metal Magnetic Ring Holder For USB Monitor / Display Screen / Mobile PhoneStrong Adsorption, stable and reliable Adopts high-quality rubidium magnets for greater and more stable absorption Suitable for USB Monitor screen  Easy to attach, stable and convenient  for re...

SKU: AF-5360

A magnetic pogo pin connector set with three 0.1" (2.54mm) spaced contact pins in a right-angle configuration. The two halves snap together via embedded magnets, ensuring all three pogo pins make reliable contact. If connected backwards, the magnets repel — providing built-in polarity protection....

SKU: AF-6357 · MPN: ADA6357

Add rotational sensing without a mechanical connection using the AS5600 magnetic angle sensor. This breakout can sense a rotating north/south magnetic field up to 3mm away from the chip body, making it useful for frictionless rotary encoders and contactless potentiometer-style controls.Magnetic a...

SKU: AF-158

Hall effect sensors detect whether a magnet is near. Useful for non-contact/waterproof type switches, position sensors, rotary/shaft encoders. I tried dozens of different hall effect sensors to see which one would work best for the SpokePOV kit (to determine the wheel location) and this one...

SKU: AF-4366

The Adafruit TLV493D is a 3-axis magnetometer designed for detecting and tracking nearby magnets in three dimensions. Manufactured by Infineon, this sensor measures magnetic fields across the X, Y, and Z axes with 12-bit resolution — ideal for applications like DIY joysticks, position sensing, or...