All Products
Showing 1-20 of 60 products
Adafruit FONA 808 - Mini Cellular GSM + GPS Breakout
The Adafruit FONA 808 combines 2G cellular connectivity with integrated GPS tracking in a compact 1.75 × 1.6-inch breakout. Built around the SIM808 module with an MT3337 GPS chipset, it provides voice calling, SMS, GPRS data, and GPS geolocation — all controlled over a single serial port via AT c...
Adafruit Ultimate GPS Breakout with GLONASS + GPS - PA1616D
The Adafruit Ultimate GPS Breakout with GLONASS + GPS is an enhanced version of the popular Ultimate GPS, built around the MTK3333 chipset with PA1616D module. It supports both GPS and GLONASS satellite networks, tracking up to 33 satellites on 99 channels for improved coverage and accuracy world...
GPRS/GSM + GPS A9G Pudding/SMS/Voice/Wireless Data Transmission + Positioning IOT Development Board
The A9G development board is a compact IoT module combining GPRS/GSM cellular connectivity with GPS/BDS dual-mode positioning. Based on the A9G module, it supports voice calls, SMS, GPRS data networking, and real-time location tracking — all on a single board. Packed with peripherals including a...
DAN-F10N Dual-Band L1/L5 GNSS Breakout
·
Built around the u-blox F10 engine, this GNSS breakout receives L1 and L5 frequency bands simultaneously for reliable metre-level positioning, even in challenging environments such as dense urban canyons. u-blox multipath mitigation helps isolate the strongest signals, while the SAW-LNA-SAW RF fr...
32u4 with A9G GPRS GSM GPS-V1.1
An all-in-one development board combining an ATmega32U4 microcontroller with an A9G GPRS/GSM/GPS module. Capable of making voice calls, sending SMS text messages, and providing GPS positioning — all controllable via AT commands over serial. The board includes analogue, I2C, and digital expansion ...
SparkFun GPS Breakout - Chip Antenna, SAM-M8Q (Qwiic)
The SparkFun SAM-M8Q GPS Breakout features a u-blox SAM-M8Q 72-channel GNSS receiver with a built-in chip antenna. It supports GPS, GLONASS, Galileo, and BeiDou constellations simultaneously, providing improved positional accuracy and faster satellite lock times. The board communicates over I2C ...
GPS-RTK Dead Reckoning Kit (ZED-F9R, SMA)
·
Get started with high-precision RTK GNSS and dead reckoning using u-blox's ZED-F9R module. This kit combines a sensor-fusion GPS breakout, a multiband SMA antenna and a USB cable so you have the core hardware needed for a rover setup.The ZED-F9R fuses GNSS measurements with a 3D IMU sensor, wheel...
GPS-RTK Dead Reckoning Breakout - ZED-F9R (Qwiic)
·
This high-precision GNSS breakout is built around the u-blox ZED-F9R, combining RTK positioning with Automotive Dead Reckoning (ADR) sensor fusion. It fuses a 3D IMU sensor, wheel ticks, a vehicle dynamics model, correction data and GNSS measurements to provide accurate and continuous positioning...
GPS-RTK Board - NEO-M8P-2 (Qwiic)
·
Built around the u-blox NEO-M8P-2, this breakout brings high-accuracy GNSS and GPS positioning with RTK support to the Qwiic ecosystem. It’s designed for applications where standard GPS accuracy isn’t enough, with RTK positioning down to 25mm so you can track the location of a device, robot or ve...
SparkFun GPS Breakout - ZOE-M8Q (Qwiic)
The SparkFun ZOE-M8Q GPS Breakout is a miniaturised, high-accuracy GNSS receiver board with Qwiic (I2C) connectivity. The u-blox ZOE-M8Q is a 72-channel receiver that tracks GPS, GLONASS, BeiDou, and Galileo constellations simultaneously for faster lock times and improved precision. An onboard r...
SparkFun GPS Breakout - Chip Antenna, SAM-M10Q (Qwiic)
The SparkFun SAM-M10Q GPS Breakout features the SAM-M10Q chip-antenna module from u-blox©. The M10Q line is the successor to u-blox's M8Q found on the SparkFun GPS Breakout - Chip Antenna, SAM-M8Q (Qwiic), and is a drop-in replacement with updated features to reduce power consumption by almost ha...
Quadband GNSS RTK Heading Breakout - LG580P (Qwiic)
·
This high-precision positioning breakout is built around the Quectel LG580P GNSS module, giving projects centimetre-level RTK positioning plus instantaneous heading when used with two GNSS antennas. Unlike systems that need to move before they can infer direction, the dual-antenna setup can deter...
GNSS Flex Breakout Carrier Board
·
This carrier board brings the GNSS Flex ecosystem out to a practical development breakout, so you can use your chosen GNSS Flex module on a breadboard, with a flight controller, or inside a custom navigation build. The standard 2x10 male headers accept a GNSS Flex module and expose its available ...
NEO-F9P GNSS-RTK L1/L5 Breakout with Qwiic
·
Bring high-precision GNSS positioning to your project with the u-blox NEO-F9P engine and dual-band L1/L5 reception. L5 signals sit in the protected ARNS band, helping reduce RF interference and improve reliability in challenging environments such as dense city streets.The breakout provides five s...
SparkFun GPS Breakout - NEO-M9N, Chip Antenna (Qwiic)
The SparkFun NEO-M9N GPS Breakout with on-board chip antenna is a high quality, GPS board with equally impressive configuration options. The NEO-M9N module is a 92-channel u-blox M9 engine GNSS receiver, meaning it can receive signals from the GPS, GLONASS, Galileo, and BeiDou constellations witn...
SparkFun GPS Breakout - NEO-M9N, SMA (Qwiic)
The SparkFun NEO-M9N GPS Breakout is a high quality GPS board with equally impressive configuration options including SMA. The NEO-M9N module is a 92-channel u-blox M9 engine GNSS receiver, meaning it can receive signals from the GPS, GLONASS, Galileo, and BeiDou constellations with ~1.5 meter ac...
SparkFun GPS-RTK Dead Reckoning Breakout - ZED-F9R, SMA (Qwiic)
The SparkFun Dead Reckoning Breakout SMA - ZED-F9R is a high precision, sensor fusion GPS board with equally impressive configuration options and takes advantage of u-blox's Automotive Dead Reckoning (ADR) technology. The ZED-F9R module provides a highly accurate and continuous position by fusing...
SparkFun GPS Breakout - XA1110 (Qwiic)
The SparkFun XA1110 GPS Breakout is a small I2C-supported module built for easy hookup, thanks to our Qwiic Connect System. Equipped with the XA1110 GPS module from GTOP, this board utilizes the MediaTek MT3333 chipset, loaded with specialized SparkFun firmware that enables both I2C and serial p...
SparkFun GPS Breakout - NEO-M9N, U.FL (Qwiic)
The SparkFun NEO-M9N GPS Breakout is a high quality, GPS board with equally impressive configuration options. The NEO-M9N module is a 92-channel u-blox M9 engine GNSS receiver, meaning it can receive signals from the GPS, GLONASS, Galileo, and BeiDou constellations with ~1.5 meter accuracy. This ...
u-blox ZED-X20P Allband GNSS RTK Breakout (Qwiic)
·
This GNSS RTK breakout brings the u-blox X20 engine to a maker-friendly board for high-precision positioning projects. It is designed around the ZED-X20P all-band receiver and can process signals from GPS, Galileo, BeiDou, QZSS and NavIC across all GNSS frequency bands, including L-band.The board...
