All Products
Showing 1-20 of 60 products
Gravity: Arduino DHT11 Temperature Humidity Sensor
DHT11 Temperature and Humidity Sensor Module
DHT11 Temperature And Relative Humidity Sensor
ESP8266 ESP-01/ESP-01S DHT11 Temperature Humidity WiFi NodeMCU Module for Arduino
AM2320 Digital Temperature and Humidity Sensor
Gravity: STCC4 True Carbon Dioxide (CO2) Sensor (3-in-1 Air Quality Monitoring, 400 ~ 5000ppm)
MPN: SEN0678
Temperature and Humidity Sensor Module DHT11
Gravity: Intermediate(advanced) Kit for Arduino
AM2320 Digital Temperature and Humidity Sensor
DHT11 basic temperature-humidity sensor + extras
Sensor ELECFREAKS PlanetX DHT11
MPN: EF05004
Gravity: HCL Sensor (Calibrated) - I2C & UART
Gravity: PH3 Sensor (Calibrated) - I2C & UART
Gravity: Serial Data Logger for Arduino
Multifunction DHT11 LM35 Temperature Humidity Easy Module Shield for Arduino UNO
Gravity: 0-10V 15-bit High-Precision Dual-Channel ADC Module
MPN: DFR1184
Leaper - Upgraded RFID Stepper Driver Learning Kit for Arduino
Humidity and Temperature Sensor Module
Gravity: H2 Sensor (Calibrated) - I2C & UART
Gravity: SGP40 Air Quality Sensor
Gravity: Arduino DHT11 Temperature Humidity Sensor
This Gravity-compatible DHT11 sensor provides calibrated digital temperature and humidity readings via a single data pin. With an integrated 8-bit microcontroller and factory-calibrated coefficients stored in OTP memory, it delivers reliable measurements with minimal setup. The Gravity 3-pin int...
DHT11 Temperature and Humidity Sensor Module
The Little Bird DHT11 Temperature and Humidity Sensor Module provides calibrated digital temperature and humidity readings from a single sensor. Designed and made in Sydney, Australia, it requires no extra components — just connect the included cable and start measuring. The module operates at 3...
DHT11 Temperature And Relative Humidity Sensor
This stand alone DHT11 can read the temperature and humidity and send the information over a one wire, simplex serial bus. Arduino.cc provides a DHT11 library to aid in communicating with this module.**DHT11 Temperature and humidty sensor. Pinout:**- Ground- Not Used- Data- Vcc**Specifications...
ESP8266 ESP-01/ESP-01S DHT11 Temperature Humidity WiFi NodeMCU Module for Arduino
A compact sensor shield that pairs with an ESP8266 ESP-01 or ESP-01S module to monitor temperature and humidity over WiFi. The onboard DHT11 sensor captures environmental data, which the ESP8266 processes and uploads to a server — perfect for IoT and smart home projects. Simply program your ESP-...
AM2320 Digital Temperature and Humidity Sensor
The AM2320 is a digital temperature and humidity sensor with an I2C interface. Its straightforward I2C communication makes it easy to connect to any Raspberry Pi or Arduino, and it works alongside other I2C sensors and devices on the same bus. A great option for environmental monitoring projects...
Gravity: STCC4 True Carbon Dioxide (CO2) Sensor (3-in-1 Air Quality Monitoring, 400 ~ 5000ppm)
· MPN: SEN0678
This Gravity air quality module uses Sensirion’s STCC4 gas sensing chip to directly measure carbon dioxide with the thermal conductivity measurement principle. It is designed for compact, cost-effective indoor monitoring nodes where stable CO₂ readings are needed without complex hardware integrat...
Temperature and Humidity Sensor Module DHT11
DHT11 Temperature and Humidity sensor is as powerful as it used to be but easier to use. This DHT11 Arduino temperature and humidity sensor has a full range temperature compensation, low power consumption, long term stability and calibrated digital signal. A high-performance 8-bit mi...
Gravity: Intermediate(advanced) Kit for Arduino
The DFRobot Gravity Intermediate Kit for Arduino takes you beyond the basics with a comprehensive set of sensors, modules, and an Arduino-compatible board. Starting with simple LED projects and progressing to more complex builds like a mini electronic drum kit, sound-activated LED, and digital di...
AM2320 Digital Temperature and Humidity Sensor
The AM2320 is a low-cost digital temperature and humidity sensor with an I2C interface — a simpler alternative to the classic DHT11/DHT22 sensors that require timing-critical bit-bang protocols. With standard I2C communication, it's easy to integrate with any Arduino, Raspberry Pi, or CircuitPyth...
DHT11 basic temperature-humidity sensor + extras
The DHT11 is a basic, ultra low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and spits out a digital signal on the data pin (no analog input pins needed). Its fairly simple to use, but requires careful timing t...
Sensor ELECFREAKS PlanetX DHT11
· MPN: EF05004
It is sensitive to changes in ambient temperature and humidity and can be used for high-temperature alarms and environmental humidity detection.PlanetX DHT11
Gravity: HCL Sensor (Calibrated) - I2C & UART
This is a sensor that detects hydrogen chloride concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentration of hydrogen chloride in the environment. Can be widely used in the detecti...
Gravity: PH3 Sensor (Calibrated) - I2C & UART
This is a sensor that detects phosphine concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentration of phosphine in the environment. Can be widely used in the detection of phosphine ...
Gravity: Serial Data Logger for Arduino
Compared to the old MicroSD Card Module, this Gravity: Serial Data Logger can store data more conveniently, and supports direct data printing through serial port without additional codes.The Serial Data Logger provides onboard 128MB Flash memory, no more TF card required. It comes with a USB func...
Multifunction DHT11 LM35 Temperature Humidity Easy Module Shield for Arduino UNO
The board is designed for beginners in Arduino, with various components available that makes you build more than 10 projects easily. You won’t have to solder or connect anything at all, just plug it in a shield and start coming up with various simple examples rather than dealing with cables, sens...
Gravity: 0-10V 15-bit High-Precision Dual-Channel ADC Module
· MPN: DFR1184
The Gravity 0–10V ADC Module is a high-precision dual-channel analogue-to-digital converter designed to interface industrial-grade 0–10V sensors with microcontrollers and Linux-based systems. Built on the Texas Instruments ADS1115, it delivers 15-bit resolution (0.375 mV per step) with ±2 mV accu...
Leaper - Upgraded RFID Stepper Driver Learning Kit for Arduino
The Leaper Upgraded Learning Kit is a comprehensive Arduino starter kit that includes advanced modules such as an RFID reader, stepper motor driver, real-time clock, and a wide range of sensors and components. Built around an UNO R3 compatible board, it provides everything you need to learn Ardui...
Humidity and Temperature Sensor Module
Measure temperature and relative humidity with this simple, Arduino-compatible sensor module based on the DHT22. With just three connections (GND, power, and data), you can read both temperature and humidity from a single I/O pin on your microcontroller. An Arduino library is available to make in...
Gravity: H2 Sensor (Calibrated) - I2C & UART
This is a sensor that detects hydrogen concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentration of hydrogen in the environment. Can be widely used in the detection of hydrogen in ...
Gravity: SGP40 Air Quality Sensor
The Gravity SGP40 Air Quality Sensor uses Sensirion's SGP40 digital VOC sensor chip with built-in temperature and humidity compensation. It outputs a VOC index (0–500) that can be used directly to evaluate indoor air quality without calibration. The Gravity interface provides plug-and-play connec...
