All Products

SKU: SF-LCD-00710

A framed 128 × 64 pixel graphical LCD with LED backlight. This STN-type display provides clear, high-contrast graphics and text output using the widely supported KS0108B parallel interface chipset. The module includes negative voltage generation circuitry onboard, simplifying integration. Key Fe...

SKU: PR-PIM400

A 128x64 pixel, 2.15" LCD display with snazzy six-zone RGB backlight and six capacitive touch buttons. GFX HAT makes an ideal display and interface for your headless Pi projects. GFX HAT riffs off our beloved Display-O-Tron HAT, but gives you the flexibility of individual pixels, letting you d...

SKU: DF-DFR0287

A 128×64 pixel LCD shield with LED backlight that plugs directly into Arduino boards. Supports English, Chinese, and bitmap image display. Includes a built-in 5-direction joystick for menu navigation and interactive control, plus breakout pins for additional I/O. Key Features 128×64 LCD Displa...

SKU: DF-DFR0091

A 128 × 64 pixel graphic LCD module based on the ST7920 controller, featuring a blue backlight with white characters. Supports both parallel (8/4-bit) and SPI (3-wire serial) interfaces, with parallel mode set as the default. To switch to SPI mode, move the R9 resistor to the R10 position. The d...

SKU: DF-FIT0021

A 128×64 pixel graphic LCD module driven by the ST7920 controller. This display supports English characters, Chinese characters, and custom graphics over both serial (SPI) and parallel interfaces, making it a versatile choice for Arduino projects that need more than a simple character display. T...

SKU: DF-FIT1033 · MPN: FIT1033

This thin, flexible RGB light-emitting panel is designed for embedded systems, custom LCD backlights and diffuse indicator lighting. It uses separate red, green and blue channels to produce RGB colour output, with a common anode interface for driving from your own electronics.The bendable panel c...

SKU: AF-1932

A labelled breakout board for 40-pin dot-clock TFT displays with an integrated LED backlight driver. Breaks out all 40 FPC pins to breadboard-friendly through-hole pads and includes a FAN5333-based boost converter for driving backlight LED strings up to 24V. The backlight driver defaults to 25mA...

SKU: PL-1219

This white-on-blue 20×4 character LCD adds a clear, easy-to-read display to your electronics projects. With four rows of 20 characters, it provides plenty of space for sensor readings, menus, status messages, and more. The display uses the industry-standard HD44780 parallel interface, making it ...

SKU: AF-6484 · MPN: ADA6484

This compact full-colour display panel provides a dense 128 × 64 pixel matrix for showing text, graphics and simple animations in projects where you want a high-resolution LED display.Resolution: 128 × 64 pixelsLED type: RGB LED matrixPixel pitch: 2mmFormat: panel-style displayThe fine 2mm pitch ...

SKU: PR-PIM727

An all-in-one, RP2350 powered controller for HUB75 LED matrix panels. Interstate 75 W is a RP2350-based driver board for HUB75-style LED matrices - they're the chainable LED panels that you sometimes see making up video walls or big advertising displays. It's designed to plug neatly into the bac...

SKU: PR-PIM113

The Display-O-Tron HAT adds a 16×3 character LCD display, 6-zone RGB LED backlight, bar graph LEDs, and six capacitive touch buttons to your Raspberry Pi — all in one slim HAT-format board. Ideal for internet radio controls, home automation dashboards, and interactive Pi projects. Key Features ...

SKU: AF-1596

A 5.0-inch TFT display with 800×480 resolution, LED backlight, and a 4-wire resistive touchscreen overlay. The touchscreen adds user input capability for interactive interfaces, menus, and control panels. This is the touchscreen version of the 5.0" 40-pin TFT Display without Touchscreen. This is...

SKU: AF-938

A crisp 1.3" monochrome OLED display with 128×64 white pixels, driven by the SSD1306 controller. Each pixel is individually addressable, and because OLEDs emit their own light, no backlight is needed — resulting in excellent contrast and readability in a compact form factor. The breakout board i...

SKU: DF-DFR0464

A 16×2 character LCD module with full RGB backlight, communicating over I2C for minimal wiring. With support for 16 million backlight colours, this display adds a vibrant, customisable readout to your Arduino or compatible microcontroller projects using just four wires: VCC, GND, SDA, and SCL. P...

SKU: AF-1622

A diffused white LED backlight strip in a 3.5 mm thick acrylic enclosure. Normally found behind LCDs, this module uses a single white LED with a specially designed acrylic diffuser to provide near-uniform illumination across the entire surface. A reflector on the back directs all light forward fo...

SKU: AF-4882

A 50mm diameter plastic diffused backlight LED that produces near-uniform white illumination from a slim semi-circle of acrylic. Originally designed for LCD gauge displays, these backlights are encased in a 2.2mm thick diffusing acrylic that spreads light evenly from just two internal white LEDs....

SKU: AF-326

This 0.96" monochrome OLED display packs 128×64 individually controllable white pixels into a compact, highly readable screen. Because OLED pixels produce their own light, no backlight is needed — resulting in excellent contrast, low power consumption, and crisp visuals even at this small size. ...

SKU: KI-56115

The Kitronik :VIEW Graphics128 OLED display gives the user the ability to add a monochrome 128x64 display to the BBC micro: bit. The onboard edge connector allows the micro:bit to slot into the board without any additional fixings. The board also features a micro:bit style I/O connector which mea...

SKU: AF-499

This 20×4 character LCD features black text on a full-colour RGB backlight that you can set to any colour — red, green, blue, purple, teal, white, and everything in between. It's the most daylight-readable character LCD available and looks strikingly good at any colour or brightness level. A dro...

SKU: SF-LCD-00255

This is a basic 16 character by 2 line display. Black text on Green background. Utilizes the extremely common HD44780 parallel interface chipset (datasheet). Interface code is freely available. You will need ~11 general I/O pins to interface to this LCD screen. Includes LED backlight. Dime...