All Products

SKU: AF-3413

If your soldering isn't quite up to scratch, or you just don't own a soldering iron yet, then these nifty hammer headers from Pimoroni might be just what you need. They come in both male and female, and use crafty little retaining nubbins to grip tightly into the holes on the PCB. Ab...

SKU: PR-PIM296

Absolutely no soldering required! All that's needed is a few gentle taps with a hammer and bazinga! Your header is securely attached to your Pi Zero or pHAT. If your soldering isn't quite up to scratch, or you just don't own a soldering iron yet, then these nifty hammer headers might be just t...

SKU: PI-COM1104

Absolutely no soldering required! All that's needed is a few gentle taps with a hammer and bazinga! Your header is securely attached to your Pi Zero or pHAT.If your soldering isn't quite up to scratch, or you just don't own a soldering iron yet, then these nifty hammer headers might be just the j...

SKU: PI-COM1105

Absolutely no soldering required! All that's needed is a few gentle taps with a hammer and bazinga! Your header is securely attached to your Pi Zero or pHAT. If your soldering isn't quite up to scratch, or you just don't own a soldering iron yet, then these nifty hammer headers might be just t...

SKU: AF-3663

If your soldering isn't quite up to scratch, or you just don't own a soldering iron yet, then these nifty hammer headers from Pimoroni might be just what you need.  Absolutely no soldering required! All that's needed is a few gentle taps with a hammer and whammo! Your header is secur...

SKU: AF-3662

If your soldering isn't quite up to scratch, or you just don't own a soldering iron yet, then these nifty hammer headers from Pimoroni might be just what you need.  Absolutely no soldering required! All that's needed is a few gentle taps with a hammer and whammo! Your header is secur...

SKU: PR-PIM330

Fit a pHAT to your Raspberry Pi Zero without soldering! These spring-loaded pogo pins provide a reliable electrical contact between your Pi Zero and pHAT, making it quick and easy to swap boards between projects with no tools required. Specially engineered to be just the right size for a solid c...

SKU: SF-PRT-29327 · MPN: PRT-29327

Build a neater, sturdier Raspberry Pi stack with this hardware kit for mounting a standard Pi HAT. It is designed for Raspberry Pi 3, 4 and 5 boards, including builds where a larger cooling fan or heat sink needs extra clearance.The included tall 2x20 pin female GPIO header raises the HAT above t...

SKU: AF-2711

With the Pi-EzConnect you can connect all sorts of electronics to a single Raspberry Pi  with no soldering or breadboarding! This HAT has screw-terminals for each pin on the Pi Header Key features: Solderless or soldered connections for all GPIO’s on a Raspberry Pi Mini proto area for...

SKU: PL-1969

These 2×13-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable 26-wire connections in a compact dual-row housing. Compatible with male and female dual-row...

SKU: LB-LS3506

This 2×20 pin extra tall male GPIO header stands 12 mm high, providing additional clearance when soldering onto HATs, Bonnets, or custom boards for Raspberry Pi. It's ideal for boards that don't come with headers pre-soldered, or when you need extra height for stacking. Key Features 40-Pin (2×...

SKU: PI-COM0002

This 2×20 pin female GPIO header with extended 11 mm pins is designed for Raspberry Pi boards with 40-pin GPIO headers. The extra-tall pins are perfect for stacking pHAT boards on top of each other while still leaving access to the GPIO pins underneath. Key Features 40-Pin (2×20) – Matches the...

SKU: LB-LS3507

This 2×20 pin tall female header extends the reach of any board with a standard 40-pin GPIO layout, including the Raspberry Pi, Google Coral, and NVIDIA Jetson. At 16 mm tall with standard 0.1″ (2.54 mm) spacing, it provides significant clearance for stacking boards or fitting into enclosures. C...

SKU: PI-COM0004

This extra-tall 2×20 female header is designed to connect custom PCBs and HATs to the Raspberry Pi GPIO pins. At 16.5 mm tall, it provides enough clearance for your board to sit above the Ethernet and USB jacks without interference. The header has 3 mm pin length on the underside, so there's no ...

SKU: EC-DRA09012K

An accessory kit for the Raspberry Pi Zero and Zero W that provides adapters and headers to expand the board's compact connectors to full-size interfaces. Includes a clear acrylic case, USB OTG cable, Mini HDMI adapter, GPIO breakout cable, and a full set of header strips. Key Features USB OTG...

SKU: PL-1904

These 1×5-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable five-wire connections in a single inline housing. Compatible with male and female headers, s...

SKU: AF-2270

The "poor woman's" Raspberry Pi A+ / B+ / Pi 2 cobbler! This combo of 2x20 pin (0.1 spaced) header and socket is for our popular GPIO Ribbon Cable for Raspberry Pi Model A+/B+/Pi 2 (40 pins).  It comes in two parts, a 'pin-through' socket and a male header. The socket straddles the c...

SKU: PL-1906

These 1×7-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable seven-wire connections in a single inline housing. Compatible with male and female headers, ...

SKU: PL-1907

These 1×8-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable eight-wire connections in a single inline housing. Compatible with male and female headers, ...

SKU: AF-2187

A custom-made 2×20 short female header designed for surface-mount (SMT) Raspberry Pi HAT designs. This header provides the slimmest possible profile when you need a low-clearance connection between your HAT and a Raspberry Pi. While it requires SMT soldering skills (more challenging than standar...