All Products
Showing 1-20 of 60 products
Arduino Industrial 101
The Arduino Industrial 101 is a compact WiFi evaluation board based on the Arduino 101 LGA module. Combining an ATmega32U4 microcontroller with an Atheros AR9331 MIPS Linux processor, it provides a powerful platform for IoT projects without the need for multiple shields. Similar to the Arduino Y...
Arduino GIGA R1 WiFi Development Board
Note: The Arduino GIGA R1 WiFi Development Board is available for pre-order and is expected to be shipped in late September. This Arduino GIGA R1 WiFi Development Board measures only 101 x 53mm and has the same form factor as the popular Mega and Due. Despite its small size, it offers 76 GPIO ...
High Power 100mW 2.4G Wireless Transceiver Module RF Communication NRF24L01P+PA
AS01-ML01DP5 is a 2.4GHZ100mW, high speed (maximum air speed up to 2Mbps) high stability, industrial grade wireless transceiver integrated digital transmission module. Module uses nRF24L01P RF chip and RFX2401C power amplifier chip, built in LNA, the receiving sensitivity of 10dBM, working in the...
BMD-34 Bluetooth 5 / Thread / Zigbee Module with U.FL
·
The BMD-34 series is a compact, surface-mount multiprotocol RF module for low-power embedded designs needing Bluetooth 5, Thread or Zigbee connectivity at 2.4 GHz. It is based on the Nordic nRF52840 and combines an Arm Cortex-M4 with FPU, integrated radio and hardware cryptographic engine in a re...
Raspberry Pi PLC Industrial Controller (Relay Output)
This equipment based on the Raspberry Pi technology is designed for professional use.This PLC has up to 36 Digital Inputs, 16 Analog Inputs, 8 Analog Outputs, up to 23 Relays and 6 Interrupts. It also contains several communication ports like, the CAN bus, double Ethernet port, double RS-485, WiF...
LattePanda IOTA x86 SBC - Intel N150, 16GB RAM, 128GB eMMC
·
Built for embedded projects that need desktop-class compatibility in a compact footprint, this palm-sized x86 single-board computer combines an Intel Processor N150 with 16GB LPDDR5 memory and 128GB eMMC storage. It is designed as the next generation of the LattePanda V1, retaining the familiar 8...
Gravity: 8-Digital LED Segment Display Module (Green)
An 8-digit green LED segment display module with I2C communication, part of the DFRobot Gravity sensor and module range. It provides a clear, bright numerical display with 16 levels of adjustable brightness, making it easy to show sensor readings, counters, clocks, and other numerical data in you...
High Torque Waterproof Digital Servo with Magnetic Encoder (35KG, 360°, IP54)
·
This high-torque waterproof digital servo delivers up to 35 kg·cm of torque at 7.4V and features a 12-bit magnetic encoder for precise absolute position control across a full 360° range. Built for demanding robotics and automation applications, it combines reinforced steel gears, dual ball bearin...
Gravity: 8-Digital LED Segment Display Module (Red)
An 8-digit red LED segment display module with Gravity I2C interface. This module can display numbers, basic characters, and supports 16 levels of brightness adjustment — ideal for clocks, counters, dashboards, and data readouts in Arduino and Raspberry Pi projects. The Gravity connector makes w...
Raspberry Pi RP2350A Microcontroller IC
·
The RP2350A is a next-generation Raspberry Pi microcontroller IC designed for high-performance embedded projects, custom PCBs and compact connected devices. It builds on the RP2040 with a selectable dual-core, dual-architecture design, letting you run either Arm® Cortex-M33 cores or open-source H...
Gravity: Digital 10A Relay Module For Arduino and Raspberry Pi
This Gravity digital relay module is designed for switching external loads from low-voltage controller boards. It suits 5V Arduino boards as well as 3.3V platforms such as Raspberry Pi, BBB, mbed, Intel Joule and Arduino 101.The module uses a high quality 3V relay and supports a wide input range,...
Fermion BMV080 Fanless PM1/PM2.5/PM10 Air Quality Sensor
·
This ultra-compact particulate matter sensor breakout is built around the Bosch BMV080 sensing unit, using laser-based light scattering with a fanless measurement principle. It can monitor PM1, PM2.5 and PM10 mass concentrations while avoiding the noise, dust build-up and mechanical wear associat...
HRB8825 Stepper Motor HAT For Raspberry Pi
HRB8825 Stepper Motor HAT For Raspberry Pi, Drives Two Stepper Motors, Up To 1/32 Microstepping Stepper Motor HAT (B) Alternative Solution Of Stepper Motor HAT, Drives Two Stepper Motors, Up To 1/32 Microstepping For 3D Printer, Sculpturing machine, Mechanical arm... Features At A ...
Raspberry Pi PLC Industrial Controller (Optoisolated Output)
This equipment based on the Raspberry Pi technology is designed for professional use.This PLC has up to 36 Digital Inputs, 16 Analog Inputs, 8 Analog Outputs, and 6 Interrupts.It also contains several communication ports like, the CAN bus, double Ethernet port, double RS-485, WiFi, Bluetooth, whi...
Genuino 101 Kit for Google's Science Journal App
The Genuino 101 Kit for Google’s Science Journal App is an interactive selection of tools to inspire future scientists and makers. Inside each kit you will find a collection of parts that support activities developed by Google and the Exploratorium in San Francisco. Beginning with a projec...
SparkFun Qwiic Navigation Switch
·
Product Overview Meet the SparkFun Navigation Switch, a nifty little addition to your I²C bus that features a 5-way tactile switch akin to a joystick! This compact component allows you to interact with your microcontroller by pushing the switch in any of five directions—up, down, left, right, or...
10W Super Bright LED - Warm White with 60 Degrees Lens
A 10W high-power warm white LED module with an integrated 60° focusing lens. The lens narrows the beam compared to the standard 120° version, concentrating the 500-lumen output into a tighter spot — ideal for searchlights, spotlights, and directional lighting. The module consists of nine separat...
Neopixel Rainbow LED strip and GVS conector -10 LEDs
This NeoPixel-compatible rainbow LED strip features 10 individually addressable WS2812B RGB LEDs with a standard 3-pin GVS connector for easy plug-and-play use. Both ends have connectors, allowing multiple strips to be daisy-chained for longer runs. Designed to work with micro:bit at 3.3V, it's ...
NB-IoT / Cat-M(eMTC) / GNSS HAT for Raspberry Pi, Globally Applicable
Prohibited by the module manufacturer SIMCOM, we're not allowed to ship this product, or to provide any tech support, to the following countries/regions: Iran, North Korea, Cuba, Sudan, Syrian. NB-IoT/Cat-M(eMTC)/GNSS HAT for Raspberry Pi, Based on SIM7080G, Globally Applicable Overview ...
Arduino Giga R1 WiFi
The Arduino GIGA R1 WiFi is a powerful development board built around the STM32H747XI dual-core microcontroller, featuring a Cortex-M7 at 480 MHz and a Cortex-M4 at 240 MHz. With 2 MB flash and 1 MB RAM, it handles demanding applications like audio processing, machine learning, computer vision, a...
